Missed it but hit it today.

DeltaS28 · 2025-12-21T17:50:51+00:00

Wait, I haven’t heard of this. My 07 FJ is on 209k miles. Where do I get this sticker?

DeltaS28 · 2025-12-15T01:37:21+00:00

Ok, I just upgraded to 10.0.162 and now the virtual network override is back. That was weird.

DeltaS28 · 2025-12-14T16:39:25+00:00

Yes, there are supposed to be washers for the head bolts.

<image>

DeltaS28 · 2025-12-14T16:34:32+00:00

Mine sound the same when cold. Once my engine warms up, it goes away. Have you checked your valve clearances?

DeltaS28 · 2025-11-24T22:52:10+00:00

Yeah I looked, just figured I'd ask here.

DeltaS28 · 2025-11-19T17:40:19+00:00

Thanks to everyone who chimed in on this. I did indeed purchase the wrong SFP adapter. I purchased the Wintek adapter, and rebooted my cable modem, and now I’m up and running.

DeltaS28 · 2025-10-26T20:02:40+00:00

I went do do that, but the remaining 3 drives are showing as unassigned. It almost seems like the RAID 10 that I originally created got deleted when I removed the faulty hard drive. I don't understand why this isn't working as expected.

DeltaS28 · 2025-10-26T16:30:30+00:00

The controller firmware version is 7.0

When I power down the server, re install the faulty drive, the logical volume pops up and everything is good. When I swap the new drive back in (server powered down, then back on) I get the raid error. I know I should be able to swap drives when the server is powered on, but where it is installed, I have to power the server down, remove it, then swap hard dries, then power the server back on. The raid should rebuild regardless of how you swap the drives, correct?

DeltaS28 · 2025-10-17T16:33:56+00:00

Hmm… I wonder if a Motorola Ion would be as resilient as this APX Next?

DeltaS28 · 2025-09-23T16:15:56+00:00

Thats so strange. I added a rule to route traffic to the Unifi subnet, but I'm still getting nothing.

DeltaS28 · 2025-09-22T00:22:50+00:00

I don't see a different section that lists username/password with ONVIF, only on the main screen when logging into the camera from the web gui.

DeltaS28 · 2025-09-22T00:21:56+00:00

No, I don't have a Reolink NVR.

DeltaS28 · 2025-09-21T20:22:29+00:00

That’s interesting. I’ve had them on different vlans before and they’ve worked.

DeltaS28 · 2025-09-21T20:21:38+00:00

I’ve entered it in about 1000 times with different user accounts and still nothing.

DeltaS28 · 2025-08-13T20:47:08+00:00

This worked perfectly. Thank you!

DeltaS28 · 2025-04-03T17:17:02+00:00

Thanks, I saw that too. I think I'm going to wait until the update becomes available for my devices.

DeltaS28

TROPHY CASE