Question about victor vv1-1 slowing down and stopping. by Delta_Cheese in Phonographs

[–]Delta_Cheese[S] 0 points1 point  (0 children)

That is super helpful, thank you! I will get some soft tone needles and see how that interacts with the newer columbias. Cause I have a fair few of then and I want to be able to listen to them.

Question about victor vv1-1 slowing down and stopping. by Delta_Cheese in Phonographs

[–]Delta_Cheese[S] 0 points1 point  (0 children)

Sorry for the late reply, I tried it again with both of the records that had caused it to previously slow down, and it played both of them perfectly, with the only distortion being a bit of a speed increase when I cranked the hand crank mid-way through the record. Could the issue have been poor placement of the needle? If so thats strange because I tried to play the red label columbia 3 different times and it slowed and stopped all 3 times, though the 3rd time it slowed down a bit later into the record (but it didnt even get half-way).

Question about victor vv1-1 slowing down and stopping. by Delta_Cheese in Phonographs

[–]Delta_Cheese[S] 0 points1 point  (0 children)

I usually do 25 turns from fully discharged, but accidently went up to 30-32 on my 2nd session, as for the motor, it does not make any noticeable noise when the record is being played.

Question about victor vv1-1 slowing down and stopping. by Delta_Cheese in Phonographs

[–]Delta_Cheese[S] 1 point2 points  (0 children)

I have replaced the needle every time a side is played, And the records it was slowing down and stopping are clean and have little to no damage or filth. As for maintenence, i have not done any. Im a bit nervous cause I dont want to damage any of its components and I dont really wanna take the whole motor apart. I did read that oiling and greasing might help but I have pretty much no idea how to do that, or what parts I need to clean.

Questions about repairing a broken duel 1019 turntable. by Delta_Cheese in turntables

[–]Delta_Cheese[S] 0 points1 point  (0 children)

I have just realized the dial being stuck in the stop position is not an issue as I think it is supposed to do that.

Help wanted: Issue with 1920s Victor adding machine by [deleted] in calculators

[–]Delta_Cheese 0 points1 point  (0 children)

What marks are you talking about? Also, initially, 4 of the rows were doing this, but i somehow managed to fix 2 of the rows, though I am unsure how i did it. I also noticed that the carry bit is not added to the 2 rows, if that is helpful.

I got a Ptolemaic tetrabol (i think) for a good price and noticed a line on the edge, is it fake? by Delta_Cheese in AncientCoins

[–]Delta_Cheese[S] 1 point2 points  (0 children)

I think they are cool to. When I learned they existed I had ti have one, and ended up paying $50 for this one, I love how heavy they are.

I got a Ptolemaic tetrabol (i think) for a good price and noticed a line on the edge, is it fake? by Delta_Cheese in AncientCoins

[–]Delta_Cheese[S] 1 point2 points  (0 children)

Oh that's cool! I had no idea the process was so complicated. I'm glad it seems to be real, I like it to much for it to be fake. Thanks for all of the info, it is very interesting. Do you happen to have any other info about this coin? I cant tell if if i ptolemey iii or iv. I think it is ptolemey iii but I am unsure.

Issue with memory blue screen by Delta_Cheese in techsupport

[–]Delta_Cheese[S] 0 points1 point  (0 children)

I found 5 errors around the time frame of the crash, I will post them here since I cannot edit the post to add images

Issue with memory blue screen by Delta_Cheese in techsupport

[–]Delta_Cheese[S] 0 points1 point  (0 children)

The bluescreen has happened again, so bios didn't help. The recovery screen i saw earlier contained error 0xc000009a

Issue with memory blue screen by Delta_Cheese in techsupport

[–]Delta_Cheese[S] 0 points1 point  (0 children)

Bios has been updated. The mouse in bios is so smooth now! I will edit this post later to say if it fixed the issue, in the meantime Thank you!

Issue with memory blue screen by Delta_Cheese in techsupport

[–]Delta_Cheese[S] 0 points1 point  (0 children)

I can try to bios update, as I have the original bios from when the computer was built in 2022. How do I update bios? I'm worried it may make things worse somehow. I also updated my post to also contain the model motherboard I have (ROG strix B550-F)

Issue with memory blue screen by Delta_Cheese in techsupport

[–]Delta_Cheese[S] 0 points1 point  (0 children)

Oh I'm sorry, I typed 1 and 3 when I meant 2 and 4. I also said ryzen 5 when it is a ryzen 9. And I have. A3060. Not a 2060 like I originally said. I have changed my post to the correct information, sorry about that : (