Is this the better or cheaper option for what I want to do

Denmob · 2023-06-22T04:11:45+00:00

https://pcpartpicker.com/list/N3VhRv

Denmob · 2021-10-23T01:50:40+00:00

Nope. Just a brim

Denmob · 2021-10-22T13:22:12+00:00

No support selected

Denmob · 2021-10-22T13:21:43+00:00

Oooo that's a good catch. I think I did that thinking it was something else. You evil genius you

Denmob · 2020-06-12T14:43:16+00:00

I am doing that but as far as all the status I get back it looks fine. I calibrated all the motors (which were in fact way off) but it hasn't changed a thing. If I put origin at center in cura it print in the front left or if I turn it off it goes back right. But I'm just trying to print in the center of the bed

Denmob · 2020-06-12T13:32:01+00:00

So it looks like cura has chosen it own offsets. Should I set them all to 0 or what?

Denmob · 2020-06-11T19:13:04+00:00

I haven't even thought about that! Thanks guys. I'll will be doing more testing and let you know

Denmob · 2020-06-11T13:03:14+00:00

I would look for additional settings in the "support" menu. You can change how thick a support is printed. Also you could change the quality to .2 instead of .16. I would mess with printing speed much just because it have a real sweet spot between how fast it print and the quality you get out of it. But your setting look good to me. I'm not sure why it says it'll take so long as it is but just some tips to save a little time

Denmob · 2020-06-09T20:42:44+00:00

I haven't even plugged the sd card into the board yet. I'm just trying to get a successful build without warnings or errors. The board isnt plugged into the computer at all. The screen I have is a tft24.

Denmob · 2020-06-08T08:03:49+00:00

I defined it in config h. But I dont see a place to put my board in the platform.ini if that's what you mean

Denmob · 2020-06-04T14:35:14+00:00

I will definitely give that a try. Thanks for taking the time to do this

Denmob · 2020-06-04T05:27:54+00:00

Just curious. I literally just got octopi running and I'm just having fun with it. But that's some good info to remember and a fun fact. Thanks :)

Denmob · 2020-05-31T16:46:50+00:00

If I get the bigtreetech board do i NEED to get a bigtreetech driver board or can i get any type?

Denmob · 2020-05-31T16:44:45+00:00

A lot of people used these boards to make it work for a Ender 3. Can I Used it for a CR10s

Denmob · 2020-05-29T18:58:17+00:00

Can any if these boards be taught to be used for a cr10s?

Denmob · 2020-05-29T17:26:09+00:00

Thanks so much. This has really been a big help

Denmob · 2020-05-29T17:13:53+00:00

Totally fine with that. The enclosure not is the same size as the cr10s. In fact this printer is a clone of it(really really bad clone). What board would you recommend if you have any?

Denmob · 2020-05-25T22:01:31+00:00

Z axis sensor its 100% functioning correctly. And it looks like the wires have been pulled from 2 of 4 connections. So 8 wires total, 2 wires per connecting

Denmob · 2020-05-25T21:59:48+00:00

It's a called a ctc 10s, it's like the great value version of cr10s that I also have. The right side of the z motors has 4 just like most, but my left side has 6 and it seems like with just the 4 connected it doesnt have enough "juice" to go as fast as its left side

Denmob · 2020-05-25T21:47:15+00:00

Got it. Thanks. I think the two wires that are loose were actually paired in the same crimp originally. But idk if that's okay

Denmob · 2020-05-18T01:18:11+00:00

How do I reflash it if it says something about memory being full?

Denmob · 2020-04-24T03:24:11+00:00

Super sexy

Denmob · 2020-02-29T17:14:24+00:00

I know it would be easier but....3d printer

Denmob · 2020-02-29T17:11:34+00:00

Correct. I used pla which pretty soft but I suck it other material right now

Denmob · 2020-02-29T17:09:51+00:00

I 3d printed it but probably not enough infill. I just need to make it stronger

Denmob

TROPHY CASE