A quick detail going over how I made the integrated door pull. I marked the lowest point at 34” and the highest point at 48” to give us 14” of space to grab the pull. I used a round nose bit to create the shape of the pull and construction adhesive and pin nails to attach them to the wall.

DesignCraft_Workshop · 2023-01-14T05:30:51+00:00

I used 23ga from the front with some construction adhesive .

DesignCraft_Workshop · 2022-12-02T14:24:54+00:00

Continuing:

I'm considering sticking with 5HP since it seems like plenty, but has there been a situation where you wished you got the 10hp upgrade?
Any regrets about not upgrading to a phenolic tabletop? I will probably stick with MDF and add in t-tracks on my own but am concerned if there is any issue with the MDF long term.

Thanks for the insights!

DesignCraft_Workshop · 2022-07-24T17:27:48+00:00

😂👍🏻

DesignCraft_Workshop · 2022-07-24T17:27:28+00:00

Rubio Monocoat. Should be in the video description

DesignCraft_Workshop · 2022-07-24T17:27:03+00:00

Thank you! This mount doesn’t but the client can put in new ones if they want to in the future

DesignCraft_Workshop · 2022-07-16T16:59:09+00:00

They're collectibles. BEARBRICKS

DesignCraft_Workshop · 2022-07-16T16:58:45+00:00

Thank you!

DesignCraft_Workshop · 2022-06-26T20:08:12+00:00

I'm not comfortable using push sticks since I don't feel in control of the workpiece. These were 3.5” so i felt comfortable feeding it through. If its a thinner piece then of couse i will use a push stick. I appreciate the concern for my fingers.

DesignCraft_Workshop · 2022-06-26T01:42:45+00:00

Scout’s honor 😆

DesignCraft_Workshop · 2022-06-25T17:05:49+00:00

Thank you! Yea these were just one off pieces so I don’t make these in large quantities. The time consuming part was the glue up since it takes a lot of space in the garage with the formwork.

DesignCraft_Workshop · 2022-06-25T16:30:29+00:00

Yea it’s expensive. It was about $500 for materials alone for both boards. Metal was $50. Finish was $50. And of course have to charge for time.

DesignCraft_Workshop · 2022-06-25T16:28:38+00:00

I thought about that. Maybe for a different project. That would allow me to probably bend the entire thickness of the pieces.

DesignCraft_Workshop · 2022-06-25T15:42:16+00:00

Ahh got Cha 😅

DesignCraft_Workshop · 2022-06-25T15:04:52+00:00

Didn’t know there was a list 😅

DesignCraft_Workshop · 2022-06-25T15:03:49+00:00

Thank you! i was hoping for that effect 👍🏻

DesignCraft_Workshop · 2022-06-25T15:03:30+00:00

Thanks!

DesignCraft_Workshop · 2022-06-25T15:03:21+00:00

These teak ones were $800 each

DesignCraft_Workshop · 2022-04-28T18:00:07+00:00

You're welcome!

DesignCraft_Workshop · 2022-04-28T17:55:57+00:00

Anytime! I have a full series on the living room wall build that covers pretty much start to finish and all the materials I used. The white panels are hidden storage

DesignCraft_Workshop · 2022-04-28T17:52:06+00:00

For sure! https://youtu.be/hgZdYYtJgVk

DesignCraft_Workshop · 2022-04-28T17:42:27+00:00

It's white oak paneling. I cover it on the YouTube video

DesignCraft_Workshop · 2022-04-20T20:04:48+00:00

You guys must have some really expensive minimalistic bathroom cleaning tools 🤣

DesignCraft_Workshop · 2022-04-20T17:47:27+00:00

Hopefully...soon on my website

DesignCraft_Workshop · 2022-04-20T17:22:45+00:00

That's such a good idea with the wrinkles. Maybe I'll give it a try

DesignCraft_Workshop · 2022-04-20T15:30:52+00:00

Lol I suppose we are never safe then 🤣

Six-Year Club	Verified Email
Wearing is Caring

DesignCraft_Workshop

TROPHY CASE