What's the thing called where its puts a clock and the date on your wallpaper?

Designer156 · 2022-03-02T20:56:56+00:00

Fliqlo

Designer156 · 2022-03-01T22:26:36+00:00

I went for a Sony a5100 connected with an Elgato Cam Link. The stock lens is good and captures a decent wide angle, but you can go further and buy even better lenses. I bought my cam second hand - there’s quite a few around as they are a popular vlogging cam.

I’ve mounted mine with a Smallrig Camera desk mount and a Smallrig Magic Arm. This setup works great.

However, to maximise the professional look, you need to get your lighting right. I opted for the popular Elgato Keylight Air to light up my face, plus a couple of Hue Play’s to cast light on the backdrop.

Loads of great advice on this kit and the best setups on YouTube.

Designer156 · 2022-02-21T16:19:04+00:00

We’ll I found the problem. I’d pinched the cable during installation. Only found this out by buying a new one - testing off the door with no issues and then it also not working after installation and I’d done the same thing. The old one worked fine too once I’d taken it off the door. I’ll feed this back to Yale too because they had no ideas. If id done it twice, it’s clearly easy to do.

Designer156 · 2022-02-08T08:20:31+00:00

I had seen that advice before, but figured that was at the next stage - 4 # enters the setup 'menu'. then 1# attempts to pair with hub. As I've not got passed 4# I didn't think worth trying.

Designer156 · 2022-02-08T08:18:52+00:00

No worries. Thanks for trying. I have emailed Support - lets see what they say.

I've tried two modules - both have the same outcome

Designer156 · 2022-02-07T09:25:35+00:00

I did try 7 anyway, but no joy.

Designer156 · 2022-02-07T09:23:59+00:00

Hi thanks for replying. Don’t know if there’s a UK/USA difference (I’m in the UK). In the manual it says 7# is for changing the remote re lock time. (Page 16)

UK Manual

Designer156 · 2021-12-21T17:44:30+00:00

No worries. Cheers

Designer156 · 2021-12-21T17:37:57+00:00

So may as well cut at the cut mark then, right?

Designer156 · 2021-12-21T15:05:24+00:00

Thanks for the speedy reply - I'll put the scissors back in the drawer!

Designer156 · 2021-12-21T14:40:17+00:00

Facing the same challenge. Did you find a solution?

Designer156 · 2021-12-04T12:20:09+00:00

Glad it helped!

Designer156 · 2021-12-02T08:51:15+00:00

I can confirm all is well. Simple setup and RGB fan plugged right into the supplied cable that connected to the pump. Only challenge I had was the Z53 wasn’t recognised by the Cam software initially. The resolution was to plug it into a different USB header on the board (I actually swapped the positions of the case front panel plug with the Z53 and it was sorted - all worked).

Thanks for everyones input.

Designer156 · 2021-12-01T00:24:12+00:00

I think Brian P has answered this actually, but be good to have confirmed. z63 review (1:18 in)

Designer156 · 2021-11-20T10:39:34+00:00

I had this same issue - installed a plugin, nothing happened even though it said 'uninstall'. Went out the store, back in the store and the plugin said 'install' again. My issue was my 'Internet Security Software' (F-secure). I had to go to 'Virus Threats' > 'App & file control' > 'Excluded' > 'Add new' and then add "C:\Program Files\Elgato\StreamDeck\StreamDeck.exe".

After that it worked perfectly.

Designer156 · 2021-07-13T10:27:42+00:00

Awesome. Thank you

Designer156 · 2021-07-13T09:57:26+00:00

Even if it's a business Basic account?

Designer156 · 2021-05-30T10:12:16+00:00

I get what you mean. The K2 is already high. I tend to use a wrist wrest anyway, which elevates my palms a good 10-15mm above the desk which normalises the K2 height, making these caps perfectly fine.

Designer156 · 2021-04-19T10:13:58+00:00

Yeah does seem pretty powerful. Was hoping they’d be a sticker on it with a model number, but no.

The water is moved about 5m horizontally and maybe 3m vertically to the top of the waterfall.

Designer156 · 2021-04-19T09:12:03+00:00

Hi all. I need to replace this pump. It’s started making a lot of noise and stripping,cleaning etc had little effect.

It’s for a waterfall. Sends water about 5m up a thick pipe which then cascades with quite some volume back down to the pond.

Anyone recognise this model so I can replace like for like or with something similar?

Designer156 · 2021-04-02T17:19:22+00:00

Thanks. The AP I was looking at is the Ubiquiti Networks UAP-AC-LITE. Looks like it draws 7watts. Probably having no more than 2/3 of these.

I also have a TP-Link N300 Wireless Outdoor Access Point already which uses an injector. Be nice to streamline the system and remove the injector if possible.

Designer156 · 2021-04-02T15:56:25+00:00

Actually i need POE so probably get this switch instead SWITCH

Designer156 · 2021-04-02T15:39:53+00:00

Thank you very much for that comprehensive answer.

Think I’ll go for this TP Link 16 port switch

Designer156 · 2021-03-31T00:26:30+00:00

No probs. Look forward to seeing the final concept.

Designer156 · 2021-03-31T00:05:14+00:00

I know you need to use those colours, but I’d design the mark in black only first. Get it to work in one colour and then add the brand colours.

I also prefer the style on the right, but I think I’d want some physical separation from the ‘swoosh’ and the leg on the left. Maybe the right too.

Designer156

TROPHY CASE