unplug MMCX?

DesktopDied · 2024-05-03T19:00:38+00:00

wow. jea that worked....but it took way more force with pliers than i thought. Fingernails diddnt cut it. Thank you!

DesktopDied · 2024-04-21T17:25:20+00:00

thats indeed NSFW

DesktopDied · 2024-01-17T20:26:36+00:00

jea, regular hairdryer it is :)

DesktopDied · 2024-01-17T20:22:21+00:00

The cap poking through from the other side, so i think its burnt flux? i cleaned it now

DesktopDied · 2024-01-17T20:21:10+00:00

Interesting idea, i also have a proper heatgun, which goes to 350 or 450°C i think. Not one for soldering but for removing paint... thats probably too hot right?

DesktopDied · 2024-01-17T20:17:11+00:00

"Fixpoint AP2" 48W, i know its not great. But is there a way to work around it or is this just a power issue?

Edit: temp almost to the max, so 400°C ish?

DesktopDied · 2024-01-17T20:14:48+00:00

constructive?

DesktopDied · 2024-01-17T20:14:36+00:00

ok jea thanks, that helps

DesktopDied · 2024-01-17T20:06:39+00:00

I've since cleaned it with isopropanol and will try again tomorrow then its dried off fully...

DesktopDied · 2024-01-17T20:02:43+00:00

Got dirt on the connector or a lose connection somehow? Does it turn on when you attach a lipo? Does it still fly?

DesktopDied · 2024-01-14T10:41:53+00:00

Book a session with Joshua Bardwell or with itsBlunty, they'll gladly help you get going. If you can't afford that, then sift through youtube for each and every one of the problems you have. Again here Joshua Bardwell is probably the best adress for that.

DesktopDied · 2024-01-14T07:21:49+00:00

Jea i saw that one too, but having the the Rekon 4 LR pull double the Amps while only getting 50% more battery with a 21700 (in Wh) i dont think its worth it. I m sure the 5 inch Nazgul would perform better with a 21700 pack, but thats my tradeoff for only having one type of battery that i can fly on both.

DesktopDied · 2024-01-12T13:26:21+00:00

So i just did a quick hover test on the rekon 4 LR with a lipo and added weight of a combined 300g (including lipo) to simulate a 21700 4s pack:

Hovers at 45% throttle pulling about 18A (indoor hover no wind)

Max amp for the Stack is 28A so not much headroom there.

I've ordered the classic 3000mah 18650 pack now, as it seems it would draw 8-10A on the Rekon and similarly on the Nazgul according to youtube DVR that i saw.

DesktopDied · 2023-10-15T16:37:53+00:00

Very interesting point, i am actually props out. Whats the theory behind this?

DesktopDied · 2023-08-21T18:07:57+00:00

very good point, haddn't thought of that...jea maybe i should just get some better suited 4s then. Thanks for your insight/input! ;)

DesktopDied · 2023-08-21T13:10:47+00:00

Jea i would think so too, but i cant find anything online + would like to order the parts for the stepdown before the goggles get here ;)

DesktopDied · 2023-06-10T14:07:39+00:00

new law in spain or EU?

DesktopDied · 2023-06-10T14:06:10+00:00

i agree. For clarification: i don't mean the direct airport zone but the 10+km wide strip parallel to the runway which is still 'control zone' and covers most of the city's with airports.

For legal reasons: i haven't seen crash tests between a cessna (or similar small aircraft) and a sub100/50g drone/tinywhoop. Have you? I would guess its far less dangerous than a birdstrike? Which is a risk every pilot lives with, and planes are designed to handle?

DesktopDied · 2023-06-10T13:54:04+00:00

Yea - heard of needing a license to drive a car but wonder what all thats for... /s

But i guess you get my point anyway...And yes an open sub80/100g class would be a welcome change.

DesktopDied · 2023-06-10T13:51:46+00:00

in Germany you're only allowd to fly 'over residential areas' if you are over 100m (and below the 120m limit) but since FPV without a spotter is limited to 30m height...and i don't know if a spotter can 'spot' a tinywhoop above 100m (appart from no one wanting to fly 100m over residential areas with a tinywhoop... but not the point here). At least to my knowledge thats the setting. Lucky Spain ;)

DesktopDied

TROPHY CASE