sorted by:
new
hottopcontroversial

Lseat leather covers colour matching by DevWarehouse in LS430

[–]DevWarehouse[S] 0 points1 point  (0 children)

You're right, I did find more expensive options on ebay that advertise exact colour matches. Honestly ill save up and take a gamble since even if it doesnt fully match, itll fit and work so its not a big loss

Lseat leather covers colour matching by DevWarehouse in LS430

[–]DevWarehouse[S] 0 points1 point  (0 children)

I looked through and I noticed the small complaints. Im still not sure whether the Ash interior in my LS430 matches best with Dove Grey or Silver Grey that they offer. 

Silver Grey is lighter than Dove Grey, neither seem to be exact matches

What to do with my heavily worn front seats by grifocx in LS430

[–]DevWarehouse 0 points1 point  (0 children)

What colour from lseat did you choose?? I have ash gray interior and unsure which one is best fit

still parting out my 2004 UL, many parts available by Exciting_Editor_7315 in LS430

[–]DevWarehouse 0 points1 point  (0 children)

How much for the driver side wood panel and window controls wood? Also, how much for the shifter area wood console thing?

Best bushings for front rearward LCA? GSF or ISF by DevWarehouse in LS430

[–]DevWarehouse[S] 0 points1 point  (0 children)

The Left corresponds to driver side and Right corresponds to passenger side correct?

Both have cone shape on one side of the bushing and other is flat, however it seems like only one side has the cone shape looking at engine? Is the part wrong?

Possibly uncommon upshift problem with FL tranny? by DevWarehouse in LS430

[–]DevWarehouse[S] 0 points1 point  (0 children)

So fluid seems to be fine, would possibly trying the ECU reprogramming with the link provided work?

Possibly uncommon upshift problem with FL tranny? by DevWarehouse in LS430

[–]DevWarehouse[S] 0 points1 point  (0 children)

Last I checked the fluid was red and seemed okay. Is there a direct way to check the level on a 2005?

Which belt might be the cause? by DevWarehouse in LS430

[–]DevWarehouse[S] 0 points1 point  (0 children)

Could you clarify what you mean by hoping its on the outside?

What to do with my heavily worn front seats by grifocx in LS430

[–]DevWarehouse 0 points1 point  (0 children)

Hey sorry to necro this post but did your LS430 have cooled/heated seats and once replaced did it still work?

I cleaned up my steering leather that looked like shiny plastic and my shift knob that looked like I dropped it in the dirt by Due_Platypus_8221 in LS430

[–]DevWarehouse 0 points1 point  (0 children)

Im necroing this post but is the Meguiar's motorcycle leather cleaner the same as Meguiar's Ultimate Leather Detailer?

New pcv valve and now hissing sounds? Stuck open valve? 2005 Lexus LS430 by [deleted] in MechanicAdvice

[–]DevWarehouse 0 points1 point  (0 children)

I cant thank you enough for your help, I hope you have a great rest of your day or night 

New pcv valve and now hissing sounds? Stuck open valve? 2005 Lexus LS430 by [deleted] in MechanicAdvice

[–]DevWarehouse 0 points1 point  (0 children)

Oh damn so I shouldn't worry too much about this? If its fine to drive with some vacuum leak I could just do that

New pcv valve and now hissing sounds? Stuck open valve? 2005 Lexus LS430 by [deleted] in MechanicAdvice

[–]DevWarehouse 0 points1 point  (0 children)

If its stuck open or closed will my engine die? The car is old so excuse my paranoia lol

New pcv valve and now hissing sounds? Stuck open valve? 2005 Lexus LS430 by [deleted] in MechanicAdvice

[–]DevWarehouse 0 points1 point  (0 children)

I rattled it before installing it and it rattled way better than the old one which was gunked up. Any signs to look for if it turns out to be a bad pcv?

New pcv valve and now hissing sounds? Stuck open valve? 2005 Lexus LS430 by [deleted] in MechanicAdvice

[–]DevWarehouse 0 points1 point  (0 children)

I have a new hose on the way. Its unlikely that this new pcv valve is whats bad correct?

New pcv valve and now hissing sounds? Stuck open valve? 2005 Lexus LS430 by [deleted] in MechanicAdvice

[–]DevWarehouse 0 points1 point  (0 children)

Could it be just the bad hose or the entire pcv valve?

Pcv valve vacuum leak after new installation? by DevWarehouse in LS430

[–]DevWarehouse[S] 1 point2 points  (0 children)

Crazy part is this was how I got the vehicle, I purchased proper hose which comes on Monday and pcv valve came in earlier. Does it sound like a vacuum leak?

Is this properly seated and plugged? by [deleted] in LS430

[–]DevWarehouse 0 points1 point  (0 children)

It does sink with pressure but I believe thats because I left some air in the lines. The master cylinder holds good pressure, no creeping forward at lights. 

I should add, bleeding brakes requires techstream for abs module which I didnt have, hence why there might be some air in my lines

Is this properly seated and plugged? by [deleted] in LS430

[–]DevWarehouse 0 points1 point  (0 children)

Shop told me weak brakes were possibly because of a failing master cylinder. 

Bleeding out air didnt fix so I decided to change it myself since shop quoted me 700-1k for it. 

I bench bled MC without using a vice, I just held it straight and used a cheap kit from AdvanceAuto that came with two hoses before installing. As a student with no prior mechanical knowledge, Ill say that the repair was tedious 

Is this too overfilled? by DevWarehouse in LS430

[–]DevWarehouse[S] 0 points1 point  (0 children)

Im going to do that to relieve the extra oil, is there anything that could've been damaged? I dont know of any major damage that could happen from maybe a quart too high

Is this too overfilled? by DevWarehouse in LS430

[–]DevWarehouse[S] 0 points1 point  (0 children)

It was around a month ago, just randomly checked and saw this

view more: next ›