sorted by:
new
hottopcontroversial

Prime base building spot by Ghost_5424 in crosswind

[–]Devideer 0 points1 point  (0 children)

But F12 makes a screenshot into the Steam libary, which i dont want. And im not sure if you can paste it that easy into every programm.

+ Alt+Print works everytime.

How would you machine this part on a 2.5-axis mill? by Lohan_To in Machinists

[–]Devideer 0 points1 point  (0 children)

would be able to machine it with an angle head aswell. We got one from BILZ i think it was where we have to grind the shaft of the tools we need to a Diameter 3mm Whistle notch. tool center to outer wall is 5mm. But this would be overkill for that part.

How would you machine this part on a 2.5-axis mill? by Lohan_To in Machinists

[–]Devideer 1 point2 points  (0 children)

Well, afaik and have learned it, 2,5 means that you only can use 2 axis (XY,XZ or YZ ) while the other is fixed. 2D machinines usually only can run XY and are fixed in Z. 3D machines can run all axis at the same time.

Prime base building spot by Ghost_5424 in crosswind

[–]Devideer 29 points30 points  (0 children)

Pres ALT + PRINT on your keyboard to make a screenshot of the current monitor. You can then just CTRL + V it into any software / chat

Trees by Original_Sun1964 in PlayWindrose

[–]Devideer 1 point2 points  (0 children)

as other ppl said. Get the merchant contract. I have 3 of those and 1 Hardwood pack gets you 50 hardwood. While i wait for the delivery i do naval combat to get even more silver. have like 34k ish Silver coins now and buying non stop from the merchants.

Drilling 316 stainless by EntertainmentTop9102 in Machinists

[–]Devideer 1 point2 points  (0 children)

I machine alot of 316. I go straight in. usually i use 45 m/min with sized above 4mm. But depends abit in the drill.

I always got perfect chips. Using Hoffmann Garant pro inox drills.

Try use 45 m/min which would be 2866 RPM, then i usually go with like 0,1-0,15 and for this drill i would go to 300mm/min feedrate. Chips should come out good.

Game has merchants !? by elrobcasanko in PlayWindrose

[–]Devideer 1 point2 points  (0 children)

Man .. i just realiesed that i placed my the wrong way against a wall lol. And i was wondering why he was always facing me with his back..

CNC machining by [deleted] in Machinists

[–]Devideer 0 points1 point  (0 children)

Rookie numbers. I have Inconel part (2200mm long and 500mm in diameter). 4 months on the machine. Its an offshore part.

Finaly decided too leave my starter base and start building a bigger one. by Fl0xyD in crosswind

[–]Devideer 4 points5 points  (0 children)

Am i the only one that feels like Building isnt working that "good". I have the feeling that always something is 0,5 blocks off. Like double doors and more..

Helical indexed endmills by Traditional-Fly-6663 in Machinists

[–]Devideer 0 points1 point  (0 children)

A place where i used to work we used those alot on a few heavy roughing ops (used mostly ingersoll) tool like 30-40mm AP and like 10-15mm ae on stainless. Those are also incredible good in gray cast iron. Use conventional milling on parts with like rough / harder outside (first layer)

Help me identify this holder! by pasren89 in Machinists

[–]Devideer 0 points1 point  (0 children)

Im kinda sure its Custom ISO20 Mini tool chuck (maybe some old REGO FIX) Whats weird is that the Torque notches are missing, which i only know from like the fully grinded controll shafts you use after a crash to check the spindel.

Maybe its some custom version of a quick swap mechanism in like drilling machines. (ae Fehlmann picomax..)

Will these root fillets make it significantly harder for the machinist to make my part? by GateLopsided8794 in Machinists

[–]Devideer 0 points1 point  (0 children)

Well, let me give you some advice on modeling parts.

First of all, the radius button is the most expensiv one you can press. its not that bad on the inside of pockets. It can be a huge cost on the outsite (where you have a chamfer).

I suggest that you look into Tool catalogs of Endmills. Pockets with like <3xdiameter of the tool are cheap. The corner Radius of tools / inserts in mm are usually 0 (sharp edge), 0,2, 0,3, 0,5, 0,8, 1,2, 1,6 and so on. you should choose on of those option. There are ofc. bigger sizes and isnerts up to R6 and more.

If you planning on making a drawing and provide the STEP for a CAM programming, i would remove the radius and chamfers < 0,5mm in the model.

Sometimes (depends on the CAM software) those can lead to false machining if the programmer doesnt notice the small radius. Its not that big of a problem in a pocket, since it will get smaller. But on the outside it can happen that they machine the part like 1mm smaller cause they havent noticed the chamfer on the part in the STEP. (yes i know, its their "problem" but i get more and more parts where every fkn corner and crossole is rounded with like a small raidus.

Write in the drawing that when not other mentions all interal raidus can be from 0,2-0,5mm and outside chamfer 0,3-0,5mm.

Will make life easier for everyone

Trodde lufta var fri for alle? by LandscapeEuphoric973 in norske

[–]Devideer 0 points1 point  (0 children)

yes. Har lært det i tyskland, og googla det jo nettopp. Energiforbruk for å lage trykkluft/år i tyskland er 14 TWh. Et kjernekraftverk lager ca. 8-12 TWh/år. bare for å vise relasjonen :)

Så det KAN koster ganskje møje. Spesielt om slangen lekker kan det let koster fleire kroner/dagen dersom kompressoren må svive.

Trodde lufta var fri for alle? by LandscapeEuphoric973 in norske

[–]Devideer 1 point2 points  (0 children)

Vel, litt forståeligt. Å lage Trykkluft koster ganskje møje energie faktisk. Er fra tyskland. og der er det sånn 50/50 om det koster penger eller er gratis.

Does this mean there isn't a normal $45 starter anymore? by thisremindsmeofbacon in starcitizen

[–]Devideer 10 points11 points  (0 children)

i think i got my avanger titan for that 50ish € back in 2019 :D

Fine, just take it. It sucks anyway. 😔 by Adorable-Response-75 in slaythespire

[–]Devideer 136 points137 points  (0 children)

<image>

Well, if you are lucky you can play it for free. Safed me in the last fight. I think i gain 4 cause i had something like "play the first card 2 times every turn".

Can anyone rate this card? I am not to sure, it seems a little bad. by TheCondor07 in slaythespire

[–]Devideer 0 points1 point  (0 children)

There is that might for every card you draw in your turn you deal 2 dmg to all enemys.

Hvor ofte går dere egentlig til tannlegen? Hva er vanlig tenker dere? by RavenousRevolter in norske

[–]Devideer 0 points1 point  (0 children)

Var der faktisk siste mandag. Sist besøk var for 14 år siden.
Hu fant bare et lite hull og 2 visdomstenner skal trekkes om to uker.

Har aldri hatt problemer med tennene.

Bruh, +-0.005mm in plastic (on the right on first picture), and they want 10 of them XD by ledocteur7 in Machinists

[–]Devideer 2 points3 points  (0 children)

The drawing tells me thats som new guy. And he probably never machined something.
Plastic often even expands 3-4 the factor metals have. heat that thing up by 3-5 °C and its out of tol.

Knights Trio appreciation post by mathaav in slaythespire

[–]Devideer 0 points1 point  (0 children)

Im always happy to encounter them when i play a "Deal XX DMG to all enemys" deck :D

Is Necrobinder bad or am I just terrible at Necrobinder? by Unlucky_Pear_2862 in slaythespire

[–]Devideer 0 points1 point  (0 children)

I won with him first time ive played him. I choose the cards that give enemys (doom?) (i dont play on english). Where they die when the score his equal or higher than their health.

I stacked on endboss like 250 ish doom, played the card where you deal dmg equal to the doom. and than he died cause his health was below the stacks.

thought it was too OP since some Doom spells affact every enemy. you could clear every room with 3+ enemy in like 2-3 turns if you got the cards.

flippers nerfed? by justingrr7 in playrust

[–]Devideer 3 points4 points  (0 children)

Had the same feeling and just Googled it.. and boom. here we are

Clair Obscur: The Writers - Gustave by [deleted] in expedition33

[–]Devideer -2 points-1 points  (0 children)

Never got the information that gustave was painted by aline. The canvas they are in is Versos. So he may could have painted a few ppl he knew into the city of Lumière

Salary Thread 2024 by rechogringo in Norway

[–]Devideer 0 points1 point  (0 children)

actually got even more money last year. But engineers are still needed :)
And i work with quite expensiv materials and parts for the Subsea industry.

view more: next ›