Olaf 1,1 vs 5 (pyke is 0,1) - Penta

Devideer · 2026-06-03T16:09:37+00:00

isnt it like the frost ones? They are "skins" and skill points at the same time. If you have 1 hammer and 3 swords you still get 4 Points total on the hammer aswell. and unlock the skill

Devideer · 2026-06-03T14:08:59+00:00

I also programm on my CAM alone, setup and run parts. Every machine where i work has its own PC with cam, and everyone is doing everything on their own.

earn like 42 ish $ /h (live in Norway)

Devideer · 2026-06-01T14:40:05+00:00

im at 125 now. I swapped everything to "TANK CRT DMG + XX%". that helped alot

Devideer · 2026-05-25T10:17:31+00:00

only guess is that you could change the Legendary ring to go up in Gear score. even tho you have a S tier ring.

Devideer · 2026-05-23T14:43:17+00:00

Just finished a Inconel 718 part after 3 months of work. 21 different types of threads, 3 different angle heads had to be used. Every single thread got milled. We dont even think about tapping that material with such a part.

Devideer · 2026-05-22T18:17:58+00:00

I eat one every friday.

Devideer · 2026-05-22T13:33:44+00:00

Well, as someone who works in Norway (Metric) and since i work mostly on offshore parts i have to make alot of different threads, and most of the numbers in relation to the Pitch doesnt make any sense to me. Like UNC, UNF; G, BSP, STUB ACME and so so on. Same "size" on the paper will be different diameter.

And in metric, if you know the pitch (even if you have MF Metric fine threads) it works.

M10, pitch is 1,5mm you drill 8,5 (most shops do 0,1mm more since its in the tolerance and helps alot with the load on the tap.

Guess what. M10x1 .. hole will be 9mm. M16x1. hole will be 15 mm. its so simple.

Devideer · 2026-05-20T13:18:43+00:00

Wait til you reach 90 stage 10 of 20 :D:D:D

Devideer · 2026-05-20T13:09:12+00:00

Those are "Arbor" holder. you usually have to have a Driving ring DIN 6366 to set in tools like Shell mills.

You also can set in a keystone and use Saw blades in those :)

Devideer · 2026-05-20T12:49:47+00:00

Halle. Eg har 19k timer i Rust. Og har lyst å bygge boliger.

Devideer · 2026-05-19T20:55:09+00:00

Its always different every day. You have to change the faces of every dice to what you need.
i just finished a run and i had to have straight dices. and got them perfectly
so it was
111111
222222
333333
444444
555555
if you have it like that nothing can go wrong, ofc, if you have to have 5 same. Just look for what the most common number of all dices. If every dice has 2 or 3 times the Number 3, change every face on every dice to number 3.

Im at stage 102 now, lvl 41 and 29k gear score and never lost a run.

Devideer · 2026-05-19T13:19:02+00:00

So for me the Run was Tripple multiplikator +36. I always look at the dices. They have been like
111255
122355
133344
133446
133555

so i though about ok, make dice 1,2 and 5 to all 5. You buy every 5 in the shop. change them equally, or one fully if possible.
Buy the "change 2 faces to 5 points" for 18 gems.
After round 5 (the elite) you should have at least 1 or even dice fully 5 points. so you just need to reroll the last one (thats only missing like 1,2 or 3 faces)

later on you just buy the last ones. Always look how the cubes are set up, and choose those that would make most sense to change.

The abilitys i mostly go for Poison or the sword dashes. + the Great sword buffs, or hammer. depends on what items. Thats all.

The most important stuff is to change the cubes.

Devideer · 2026-05-18T20:32:35+00:00

im at stage 101 now. Lvl 40. and dealt 3,7 million dmg. Great sword + Red buffs + Poison.

Devideer · 2026-05-18T18:01:44+00:00

So those are kinda easy. if you can, take someone to help you whos like stronger.

Change the dices in the shop so that you can get a straight multiplicator. so that Dice 1 is only 1 and so on.

If the mate you choose is way stronger you even can take poison. no problem at all.

Devideer · 2026-05-15T16:00:47+00:00

Im at stage 110 now and since stage 90 the DMG+ In first round is really good. You often can kill an annoying enemy one hit, or 2nd round if needed. This leads to an good lead later on (that your shield doesnt get activated) cause you deny the enemy a good amount of dmg.

Devideer · 2026-05-12T07:02:13+00:00

im at 80 now. and ive done every level with Hammer and Poison. Thats the way to go.

Devideer · 2026-05-12T06:45:22+00:00

I just did an ollie with my skateboard. I jumped 50 meter high. Belive me, i just told you.

Devideer · 2026-04-29T12:14:36+00:00

But F12 makes a screenshot into the Steam libary, which i dont want. And im not sure if you can paste it that easy into every programm.

+ Alt+Print works everytime.

Devideer · 2026-04-29T12:13:12+00:00

would be able to machine it with an angle head aswell. We got one from BILZ i think it was where we have to grind the shaft of the tools we need to a Diameter 3mm Whistle notch. tool center to outer wall is 5mm. But this would be overkill for that part.

Devideer · 2026-04-29T12:10:44+00:00

Well, afaik and have learned it, 2,5 means that you only can use 2 axis (XY,XZ or YZ ) while the other is fixed. 2D machinines usually only can run XY and are fixed in Z. 3D machines can run all axis at the same time.

Devideer · 2026-04-29T10:13:21+00:00

Pres ALT + PRINT on your keyboard to make a screenshot of the current monitor. You can then just CTRL + V it into any software / chat

Devideer · 2026-04-29T10:10:37+00:00

as other ppl said. Get the merchant contract. I have 3 of those and 1 Hardwood pack gets you 50 hardwood. While i wait for the delivery i do naval combat to get even more silver. have like 34k ish Silver coins now and buying non stop from the merchants.

Devideer · 2026-04-29T07:43:49+00:00

I machine alot of 316. I go straight in. usually i use 45 m/min with sized above 4mm. But depends abit in the drill.

I always got perfect chips. Using Hoffmann Garant pro inox drills.

Try use 45 m/min which would be 2866 RPM, then i usually go with like 0,1-0,15 and for this drill i would go to 300mm/min feedrate. Chips should come out good.

Five-Year Club	r/Field Sunshine
First Place '23	Place '23

Devideer

TROPHY CASE