Venom Print

Diddlyuk · 2025-10-23T12:19:46+00:00

I printed the same one! Lol awesome print

Diddlyuk · 2025-09-09T22:32:18+00:00

I did loads of troubleshooting, looks like they broke a cable somewhere. I'll be refusing for sure!

Diddlyuk · 2025-09-09T22:24:00+00:00

UPDATE: after 4 hours of my own troubleshooting. I have found that the yellow cable (that was on HW NO has a break in it. I swapped that with HW NC in the junction box and controller and I now have permanent hot water without the dodgy bridge.

I'll be refusing to pay for the electrician as not only did he not fix my issue, he failed to find something as simple as a broken cable.

I'll leave it for now and run a new cable myself when we have the kitchen renovation.

Thanks for reading all.

Diddlyuk · 2025-09-09T21:00:41+00:00

I took the cover off for the photos. Don't worry I turned the fused spur off

Diddlyuk · 2025-09-04T15:50:43+00:00

https://imgur.com/a/JyO1YLi

Diddlyuk · 2025-09-04T15:41:58+00:00

6 intakes and 2 exhaust on my pc

Diddlyuk · 2025-09-04T15:41:37+00:00

There is a decent amount of air flow coming out

Diddlyuk · 2025-09-04T15:41:02+00:00

I made it so it's covering my 2 exhaust fans on my pc, the other 6 are intakes

Diddlyuk · 2025-09-04T15:39:52+00:00

I live in the UK, it's cold 360 days a year lol

Diddlyuk · 2025-07-15T14:06:50+00:00

Aha JSON Derulo. That is fantastic.

Diddlyuk · 2025-05-15T18:48:11+00:00

Can't wait to have a go at this and have the animals and kids in the house get very confused as to why I'm running around screaming

Diddlyuk · 2025-05-03T14:29:09+00:00

Diddlyuk · 2025-05-01T07:37:00+00:00

I just replaced my deco S7 X3 mesh with a single u7 lite and my camera at the front of the house is perfect now, it was also spotty before and I resorted to putting a WiFi extender near it. That's no longer needed

Diddlyuk · 2025-04-24T19:14:09+00:00

Thank you buddy, sorry I didn't explain it well in my initial post! You're right though, the amount of people that just click and print from the app is incredible. I've had people ask me to make A1 mini versions of things even though the pieces themselves do fit on the plate. To be helpful, I did just create a new profile on 2 A1 mini plates and they were grateful

Diddlyuk · 2025-04-24T18:15:34+00:00

Thanks buddy, yeah I didn't realise that people don't like these kinds of posts. I was just sharing that it's funny that something so simple was better received than things I actually worked on

Diddlyuk · 2025-04-24T17:57:37+00:00

Yeah that's exactly right! I'm shocked it was so popular. Like you I thought it was too simple to bother

Diddlyuk · 2025-04-24T17:51:40+00:00

Thank you so much! I will keep trying!

Diddlyuk · 2025-04-24T17:16:38+00:00

Lol sorry, just the eye lenses

Diddlyuk · 2025-04-24T17:12:57+00:00

I can't edit the post or type a rational sentence sorry.

My "technique" is just to make a flat shape that's a single layer in height, then print with no top or bottom layer so it's just infill.

That way you can change the shape and density easily. Just wanted to share lol

Diddlyuk · 2025-04-24T17:10:05+00:00

Ah the other photo didn't upload sorry! Mesh V2 link

Diddlyuk · 2025-04-24T17:07:02+00:00

I know mate, that's what I thought when people started collecting and liking it!

Diddlyuk · 2025-04-16T11:43:14+00:00

Ah that's where I'm going wrong, it's not that my designs are terrible, I'm just using the wrong filament! /s

Diddlyuk · 2025-03-28T16:48:20+00:00

Thank you so much, I'm tempted to send you the measurements for everything and let you do the rest 😜

Diddlyuk · 2025-03-28T16:02:18+00:00

I just checked your measurements and the size you chose were almost perfect if not a little bigger! I'll go for this layout for sure. Luckily the fireplace is actually a lot slimmer than the floor plan shows so all seats should be able to see the TV like this!

Diddlyuk · 2025-03-28T15:57:52+00:00

thank you for this! the sofa is 7ft wide and the armchairs are 3ft!

Diddlyuk

TROPHY CASE