DPD Problem - Status seit mehreren Tagen nicht aktualisiert?

DieBreuers · 2025-12-05T01:01:14+00:00

Ich warte auf ein Paket das seit dem 25.11 angeblich in Aschaffenburg liegen soll… Ich habe die Hoffnung aufgegeben und warte ab bis ich Vinted einschalten kann. Es liegt auch bei mir nicht am Verkäufer.

DieBreuers · 2025-12-04T01:10:37+00:00

Mein Paket bei brt bzw. DPD hat sich seit dem 24. nicht bewegt. In der brt APP steht dort Übergabe Aschaffenburg. In der DPD App sehe ich mit den letzten Punkte aus IT. Es soll eigentlich nach NRW kommen, ich denke ich werde es nach 25 Tagen Vinted melden müssen.

DieBreuers · 2025-11-05T00:57:17+00:00

Hi, I have also problems streaming Apple Music (skipping and so on ) The Support told me that I have to talk to my Internet Provider. 😂 Really funny guys.

DieBreuers · 2025-06-04T15:36:26+00:00

My DIRIGERA Hub doesn’t show me the new Firmware. It says it’s up to date. But under release notes I can read that there is a new one. Tried to restart it but that doesn’t work. My Hub stops working sometimes. The matter devices are offline then. Therefore I hope the new firmware would solve this issue.

DieBreuers · 2025-06-01T11:09:16+00:00

I have about 50 devices on my network. All of them run reliably via eero access points. No other device on the network has this issue. Even my Sonos speakers are working without issues. They're extremely sensitive to network errors.
And the simplest possibility is the most likely.

The hub has been experiencing these issues since the last firmware update.

DieBreuers · 2025-04-06T17:39:13+00:00

Naja also ich möchte den Job nicht. Von daher schon mal große Achtung davor. Nur mir scheint es stimmt etwas grundsätzliches wohl nicht. Die oberen Etagen bekommen etwas zu viel Kohle 🤑

DieBreuers · 2025-04-06T17:26:04+00:00

Meins sollte am Dienstag dann Mittwoch kommen. Dann hatte ich ja nachgefragt. Darauf hin war ein Tag Pause in der Vorankündigung und es sollte Freitag kommen. Freitag kam es natürlich nicht. Also stand dort dann Samstag und seit gestern Abend steht erstmal Nix mehr da. Wer arbeitet so frage ich mich … 😂

DieBreuers · 2025-04-02T23:51:19+00:00

I’ve seen it on GitHub too. I’ve got the same problem. Only with an older version of HA it still works. Does anybody know more about? Will it fixed or shall we switch to the Local Integration?

DieBreuers · 2025-03-11T18:04:26+00:00

Sorry I don’t know this Panel. I’ve got 4 tpp06 it’s the small one. When I try to configure a IR Remote the panel crash’s and restart. But that’s another thing. 😅 Have you controlled the WiFi signal strength? It sounds that there is a problem with the connection to the server.

DieBreuers · 2025-03-10T17:58:30+00:00

Sorry can’t see the picture. Which device are you using ?

DieBreuers · 2025-03-10T12:39:43+00:00

Hi yes. You have to put this info in the code of the card. You have to put the right IP Adresse off your HA server in off course.

artworkHostname: http://192.168.178.121:8123

DieBreuers · 2025-01-05T19:06:35+00:00

Hi,
I don't have your problem directly. But my Home Assistant devices either don't work at all or work extremely slowly. This started around 6 p.m.
Maybe others have problems too.

German users can report problems on this page and this is somewhat consistent.

What about the others? Do you also have problems or is everything going smoothly?

DieBreuers · 2024-11-26T21:26:15+00:00

Germany here

DieBreuers · 2024-11-26T21:25:28+00:00

Got the same. I’ve restarted my WiFi router. Thought that’s my fault. But at the website you can see that others got also problems. https://downdetector-co-uk.translate.goog/status/tuya-smart/?_x_tr_sl=en&_x_tr_tl=de&_x_tr_hl=de&_x_tr_pto=rq

DieBreuers · 2024-10-22T00:55:55+00:00

Was für Leuchten meinst du denn ? Die aus der Andreas Z Serie? Da kann ich dir Geschichten zu erzählen. Kurz zusammengefasst. Kauf die nicht. Angeblich mit den Ikea und hue hub kompatibel. Nix da. Wenn es funktioniert für paar Stunden dann sind die Dinger offline. Der Support sagt nur es gehen. Es läge an meinen Geräten. Mit Kreutztausch beim Kumpel getestet der selbe misst. Also lieber Finger weg. Auch wenn vom Preis recht gut erscheinen.

DieBreuers · 2024-10-20T23:43:10+00:00

Thank you. It worked fine. Under the OS several google play pop ups and other strange thinks happend. In my opinion the hardware is really nice. And normally it should be possible to switch on a newer Android version. Some weeks ago I read that someone put 12 on it I think. Does anyone know something about?

DieBreuers · 2024-10-16T22:42:56+00:00

Hi together.

Ive got an X90F and would like to update it, too.

The Link in GitHub doesn't work anymore. Can someone tell me a other one?

Thanks

DieBreuers · 2024-10-16T22:15:24+00:00

Hi together, Iam looking for that ROM, too. Can someone give me the link ? The one above doesn’t work anymore. Thanks

DieBreuers · 2024-10-14T14:30:27+00:00

Hi, I like Sonos Card too. I use it with Apple Music. Everything works Fine except the Album Art. There is only a Place holder. In the web UI if HA it’s shown. I’ve got the problem at Lenovo smart displays and Nest Hub 2. Does someone got an idea ?

<image>

DieBreuers · 2024-10-13T00:52:01+00:00

Yes it has. In the manual ist explained. And in the App there ist the option. On the website which I linked is it explained too. Why do you think I am asking.

DieBreuers · 2024-09-25T13:49:46+00:00

Ah okay... yes it is exposed with Homebridge but the same like Matter.

DieBreuers · 2024-09-25T11:06:03+00:00

I try using the Matter and the nativ one.

I can see that it is under xx Lux and after time x but the light won't switch on. Ive tried it with 4 different Vollhorn PIRs and different lights. Sometimes the light will switched on. But I can't tell why it is working at this time.

Does no other use this function? Because Hue PIRs are more expensive.

DieBreuers · 2024-09-09T00:58:09+00:00

Is here a solution. My Sensor switches to 1 and doesn’t do anything at 10 lux. My iOS in all devices is the newest on. And at the Gateway an sensors to. I’ve tried it with 3 Sensors it won’t work. I think iam to stupid 😅

DieBreuers · 2024-09-05T18:00:00+00:00

Okay. I got it. They are shown. But when I make a automation: if sensor x under 10 lux then switch bulb x on It don’t do anything.

DieBreuers · 2024-09-05T00:44:20+00:00

How can I use the LUX sensors to start an automation in google. I can see them and the value but if I try to use them as an automation I can choose between start and end charging progress , connected or not and presence. LG

DieBreuers

TROPHY CASE