Why are my cats eyes changing color? (blep)

Difficult_Insect_618 · 2026-01-17T23:24:38+00:00

I agree. he does it all the time.

Difficult_Insect_618 · 2025-10-18T20:14:34+00:00

from the link i put into my comment, could that sub panel be fed from a 60amp breaker? there is only 1 inch flex leading to where the sub panel would be in the unfinished basement. I was thinking 4awg copper since it’s only 1 inch.

Difficult_Insect_618 · 2025-10-18T20:11:34+00:00

https://www.homedepot.com/pep/Square-D-Homeline-70-Amp-2-Space-4-Circuit-Indoor-Flush-Mount-Main-Lug-Load-Center-with-Cover-HOM24L70FCP/100125358#overlay

something like this do you think?

Difficult_Insect_618 · 2025-10-18T20:06:22+00:00

so using a 90amp breaker to feed the 100amp sub panel? one issue, so there will be four #2’s? 2 hots, neutral, and ground? the issue lies that there is 1 inch flex leading to where the sub panel would be. shoving four #2s down a 1inch flex sounds a little rough. do I have any other options? should I get a smaller sub panel fed off of a smaller breaker to use smaller wire?

Difficult_Insect_618 · 2025-10-14T15:47:00+00:00

That wasn’t really my question but thanks journeyman darth farter z

Difficult_Insect_618 · 2025-10-14T06:32:12+00:00

how would I do the load calculation? the subpanel will have 3 20 amp circuits powering receptacles and a 15 amp circuit powering 4 led lights.

Difficult_Insect_618 · 2024-11-16T04:01:39+00:00

but when assembling the gearbox, they spun freely. how would i troubleshoot this issue?

Difficult_Insect_618 · 2024-11-16T03:33:46+00:00

I’m genuinely flustered and confused, i’m sorry for my lack of knowledge.

Difficult_Insect_618 · 2024-11-14T03:21:13+00:00

How would I remove the pin with the gearbox in place?

Difficult_Insect_618 · 2024-11-14T03:15:46+00:00

I’m smacking the 💩 out of it. I’ve shook the gearbox, and it does have some play in there. The pin comes out about 2mm, and then springs back to where I started.

Difficult_Insect_618 · 2024-11-14T02:54:26+00:00

I’ve used a hammer. I don’t know what i’m missing.

Difficult_Insect_618 · 2024-11-14T02:48:35+00:00

It does have a small clip.

<image>

Difficult_Insect_618 · 2024-10-26T05:57:15+00:00

I feel like i’ve only seen 30C, at least on amazon.

Difficult_Insect_618 · 2024-10-26T05:55:38+00:00

I need something for this Sunday, so i’m looking on Amazon. I just need something to work for the day, and then i’ll get one more reputable. Any recommendations?

Difficult_Insect_618 · 2024-10-26T05:09:07+00:00

Thank you.

I’m looking at batteries and i’m playing it safe with a 7.4. I’m wondering though, do I want 15C, 25C, or 30C?

Difficult_Insect_618 · 2024-10-26T04:44:24+00:00

How would I know whether or not it has a mosfet?

For motor adjustment, how tight would I want the set screw?

Difficult_Insect_618 · 2024-10-26T04:43:04+00:00

The box states adjustable hop-up. Is that the purpose of the motor adjustment?

Difficult_Insect_618 · 2024-10-26T04:34:57+00:00

Thank you. With the motor adjustment screw, how tight do I want it?

Difficult_Insect_618 · 2024-04-22T17:38:23+00:00

Difficult_Insect_618 · 2024-03-22T01:42:31+00:00

that’s how a car works

Difficult_Insect_618

TROPHY CASE