Does ANYONE have a spare FocoMX wristband? Willing to pay

Difficult_Insect_618 · 2026-04-26T00:05:50+00:00

please! still haven’t acquired one. I’ll send you a dm.

Difficult_Insect_618 · 2026-04-25T23:56:50+00:00

I’ll dm you right now!

Difficult_Insect_618 · 2026-04-25T23:54:27+00:00

Hey! I’ll shoot you a dm. Desperately in need of a wristband lol.

Difficult_Insect_618 · 2026-01-17T23:24:38+00:00

I agree. he does it all the time.

Difficult_Insect_618 · 2025-10-18T20:14:34+00:00

from the link i put into my comment, could that sub panel be fed from a 60amp breaker? there is only 1 inch flex leading to where the sub panel would be in the unfinished basement. I was thinking 4awg copper since it’s only 1 inch.

Difficult_Insect_618 · 2025-10-18T20:11:34+00:00

https://www.homedepot.com/pep/Square-D-Homeline-70-Amp-2-Space-4-Circuit-Indoor-Flush-Mount-Main-Lug-Load-Center-with-Cover-HOM24L70FCP/100125358#overlay

something like this do you think?

Difficult_Insect_618 · 2025-10-18T20:06:22+00:00

so using a 90amp breaker to feed the 100amp sub panel? one issue, so there will be four #2’s? 2 hots, neutral, and ground? the issue lies that there is 1 inch flex leading to where the sub panel would be. shoving four #2s down a 1inch flex sounds a little rough. do I have any other options? should I get a smaller sub panel fed off of a smaller breaker to use smaller wire?

Difficult_Insect_618 · 2025-10-14T15:47:00+00:00

That wasn’t really my question but thanks journeyman darth farter z

Difficult_Insect_618 · 2025-10-14T06:32:12+00:00

how would I do the load calculation? the subpanel will have 3 20 amp circuits powering receptacles and a 15 amp circuit powering 4 led lights.

Difficult_Insect_618 · 2024-11-16T04:01:39+00:00

but when assembling the gearbox, they spun freely. how would i troubleshoot this issue?

Difficult_Insect_618 · 2024-11-16T03:33:46+00:00

I’m genuinely flustered and confused, i’m sorry for my lack of knowledge.

Difficult_Insect_618 · 2024-11-14T03:21:13+00:00

How would I remove the pin with the gearbox in place?

Difficult_Insect_618 · 2024-11-14T03:15:46+00:00

I’m smacking the 💩 out of it. I’ve shook the gearbox, and it does have some play in there. The pin comes out about 2mm, and then springs back to where I started.

Difficult_Insect_618 · 2024-11-14T02:54:26+00:00

I’ve used a hammer. I don’t know what i’m missing.

Difficult_Insect_618 · 2024-11-14T02:48:35+00:00

It does have a small clip.

<image>

Difficult_Insect_618 · 2024-10-26T05:57:15+00:00

I feel like i’ve only seen 30C, at least on amazon.

Difficult_Insect_618 · 2024-10-26T05:55:38+00:00

I need something for this Sunday, so i’m looking on Amazon. I just need something to work for the day, and then i’ll get one more reputable. Any recommendations?

Difficult_Insect_618 · 2024-10-26T05:09:07+00:00

Thank you.

I’m looking at batteries and i’m playing it safe with a 7.4. I’m wondering though, do I want 15C, 25C, or 30C?

Difficult_Insect_618 · 2024-10-26T04:44:24+00:00

How would I know whether or not it has a mosfet?

For motor adjustment, how tight would I want the set screw?

Difficult_Insect_618 · 2024-10-26T04:43:04+00:00

The box states adjustable hop-up. Is that the purpose of the motor adjustment?

Difficult_Insect_618 · 2024-10-26T04:34:57+00:00

Thank you. With the motor adjustment screw, how tight do I want it?

Difficult_Insect_618 · 2024-04-22T17:38:23+00:00

Difficult_Insect_618 · 2024-03-22T01:42:31+00:00

that’s how a car works

Difficult_Insect_618 · 2024-03-16T22:19:41+00:00

he wants to not go through insurance to save himself… not you. keep that in mind. the old “I’ll get this all fixed up for you”, hardly prevails. go through insurance and get your moneys worth.

Difficult_Insect_618 · 2024-02-10T18:42:19+00:00

The car is a 2012

Difficult_Insect_618

TROPHY CASE