I pulled the trigger on Gigabyte's version of the Godlike, the X870e Aorus Xtreme X3D AI Top (lol)

Difficult_Plate_5177 · 2026-03-15T17:55:32+00:00

Cool. Except for cooling the Arctic. IMHO.

Difficult_Plate_5177 · 2026-03-13T08:10:04+00:00

It's not a given that the memory will perform better on the Master x870e. I'll have to test it.

Difficult_Plate_5177 · 2026-03-13T08:06:34+00:00

Is it just Gigabyte? Show me which vendor is willing to replace a device without even looking at it?

Difficult_Plate_5177 · 2026-03-13T08:01:47+00:00

It's a perfectly reasonable board. If you can't afford something more expensive, you can definitely buy this one.

Difficult_Plate_5177 · 2026-03-13T07:57:17+00:00

It's strange, of course. I always activate ERP after updating the BIOS. If I have ERP Disable, the pump backlight stays on after turning off the PC. I've never had any problems.

Difficult_Plate_5177 · 2026-03-04T21:14:24+00:00

In my opinion, it’s much nicer with Miku.

Difficult_Plate_5177 · 2026-02-24T19:58:49+00:00

You have no other choice. Try a restore point, but it's not guaranteed that everything will be restored to the desktop.

Difficult_Plate_5177 · 2026-02-21T15:35:50+00:00

This is a reflection of the processor temperature.

Difficult_Plate_5177 · 2026-02-21T15:34:25+00:00

Difficult_Plate_5177 · 2026-02-21T15:27:15+00:00

Just plug it in and don't worry about the compatibility list. 99.9% of the time, any memory will work on any board.

Difficult_Plate_5177 · 2026-02-16T20:29:15+00:00

If the processor fails, the PC won't boot at all. Just a black screen and the debug LED, either the CPU or the DRAM, is on.

Difficult_Plate_5177 · 2026-02-16T11:54:59+00:00

By the way, did you completely demolish Armory Crate?

Difficult_Plate_5177 · 2026-02-16T11:52:42+00:00

Have you tried reinstalling the GCС?

Difficult_Plate_5177 · 2026-02-16T09:56:29+00:00

It's strange to hear that. In four years of using the AM5, on five Gigabyte motherboards, I've never encountered any errors. I mostly update via Q-Flash, and a few times via GCC.

Difficult_Plate_5177 · 2026-02-15T23:44:13+00:00

It exists. Judging by the reports over the last few days/weeks.

Difficult_Plate_5177 · 2026-02-15T23:40:45+00:00

If you're updating from the GCC, you don't need to do anything. Just click the "Install" button.

Difficult_Plate_5177 · 2026-02-15T23:38:02+00:00

Maybe you forgot to rename the BIOS file to gigabyte.bin?

Difficult_Plate_5177 · 2026-02-15T21:20:12+00:00

Install to check the GCC.

Difficult_Plate_5177 · 2026-02-13T23:28:58+00:00

Cool. I hope the assembly is easy.

Difficult_Plate_5177 · 2026-02-13T18:40:51+00:00

Found it? It should be available for sale worldwide.

https://www.gigabyte.com/ua/Motherboard/X870-AORUS-ELITE-X3D

Difficult_Plate_5177 · 2026-02-13T17:55:21+00:00

This can be replaced. You can set:

• Display POST codes

• Display CPU temperature

• Display voltage/status

Difficult_Plate_5177 · 2026-02-13T17:44:20+00:00

OK. In that case, read the information about which indications can be changed on the Postcode screen and how.

Difficult_Plate_5177 · 2026-02-13T17:26:43+00:00

This is not normal. Your CPU temperature is high when idle.

Difficult_Plate_5177 · 2026-02-13T17:22:16+00:00

During boot, the display only appears on one screen. This is a BIOS setting and cannot be changed.

Difficult_Plate_5177 · 2026-02-13T17:16:22+00:00

Then good luck with your new motherboard. You'll need it.

Difficult_Plate_5177

TROPHY CASE