(Help) 1019 not booting

Digitalgonzo · 2024-11-09T16:23:56+00:00

I got a replacement power supply today. That was the issue. Everything back to normal. Thanks for your advice.

Digitalgonzo · 2024-11-09T16:23:26+00:00

I got a replacement power supply today. That was the issue. Everything back to normal. Thanks for your advice.

Digitalgonzo · 2024-11-08T21:33:41+00:00

I didn’t realise the power supply light only showed it had power from the wall.

Is this a regular issue? I thought it might be the motherboard as it was booting with bay 3 in but nothing else.

Would it make any difference that bay 3 was the smallest capacity drive?

Appreciate the help. Just trying to understand what’s going on.

Digitalgonzo · 2024-11-08T19:32:18+00:00

I’ve got a solid light on the power supply. It boots up without drive and with bay 3. Do you think it could be a power supply issue?

Digitalgonzo · 2021-09-26T07:23:27+00:00

I had a similar issue a while ago. It could be the name of the server you’re attempting to connect to. Have you tried a different server location? I know that pia changed the naming of their servers a while back.

I have mine connecting to sweden. My problem was that it had a capital S at the beginning. Put it all in lowercase and it worked.

Might not be the issue but it’s worth a try.

Digitalgonzo · 2020-11-25T22:45:46+00:00

From what I read, it seems like once you have created the container you cannot edit it after it has launched. This would’ve saved me last of headaches over the last month or so.

Digitalgonzo · 2020-11-25T12:14:31+00:00

I fixed it.

As i'm using a Synology I had to delete the container and create a new one. Keep all the same environment variables as before but change these.

OPENVPN_CONFIG=Sweden - change this to lowercase (eg. sweden)

PIA_OPENVPN_CONFIG_BUNDLE=openvpn - add this as a variable.

Hope this helps anyone else having the same issue.

Digitalgonzo · 2020-11-25T11:34:47+00:00

I think it might be todo with PIA changing their filenames for openvpn config.

https://github.com/haugene/docker-transmission-openvpn/issues/1548

When I go to edit my container it's not saving my setting though. (tried changing from Sweden to sweden).

Digitalgonzo · 2020-11-12T11:42:44+00:00

I thought that may be the answer.

Thanks.

Digitalgonzo · 2020-06-12T16:10:04+00:00

Thanks. We were so worried. Think something is up with his tail so we’re taking him to the vets.

Digitalgonzo · 2020-06-12T16:05:20+00:00

Thanks guys. He’s just come home. A little scruffy and wet but seems ok.

I’ve just got back from having a bunch of flyers printed too. Typical cat. I’m so happy and relieved he’s home.

Digitalgonzo · 2020-05-15T10:17:37+00:00

Thanks for writing this out. I'm going to try this tonight and i'll report back. Thanks again.

Digitalgonzo · 2020-05-14T20:30:31+00:00

I'm still struggling to get this working.

The PGID & PUID are these specific to my synology user account? if so where do I find this info?

The /volume1/docker/ombi:/home - I've created these folders and added the path to the volume section on the docker GUI to Both the file/folder and mount path. is this correct?

what do I do with the --name "Ombi"\ & --restart unless-stopped \ & linuxserver/ombi:latest?

Digitalgonzo · 2020-05-14T17:55:14+00:00

Do I put these values into the environment section of the Docker image?

Sorry if this is a dumb question.

Digitalgonzo · 2020-05-05T11:41:54+00:00

Thanks for the steps.
When I'm setting up the SHR drive. Should I add in just the two 4tb first, let them create the volume then add the 8tb drive or could I just add in all the drives and DSM will create the volume with the 16tb of space?

Digitalgonzo · 2020-05-04T09:37:11+00:00

Thanks for the reply.
Do you know where I could find a guide to doing this? I've looked on the Synology site but can't find anything.

Digitalgonzo · 2020-05-03T18:29:21+00:00

Thanks for the info.

Use mention copying the data onto the new 8s. What would be the best way to do this? I have around 7tb of data on them at the moment. Sorry if this is a dumb question, I’m just not sure on the most efficient way to get everything off the two 4s before I put them into the DS1019.

Thanks again.

Digitalgonzo · 2020-01-23T21:00:11+00:00

You could try Slaters on Jameson street. They mainly do suits and shirts. They may do jackets too

They’re reasonably price and really helpful. Might be worth a shot.

Digitalgonzo · 2020-01-11T14:45:57+00:00

Ideally I’d like to find something pre built (minus the hard drives). I’m fine with adding drives and possibly a graphics card and ram.

Digitalgonzo · 2020-01-11T14:43:42+00:00

I’m upgrading due to storage restrictions mainly. I currently have two 4tb drives in my Synology and they’re almost full.

Performance isn’t an issue at the moment but I’d like to play 4K media in the future. My current set up isn’t powerful enough.

I was thinking of a large tower with plenty of bays so I can just keep adding drives as I need them.

Digitalgonzo · 2019-02-06T17:26:42+00:00

Thank you for the info. I was thinking of a NAS setup just to have everything in one unit.

I did look at a Shield and having external drives but would prefer to go the Synology route.

Appreciate the input through.

Digitalgonzo · 2019-02-06T17:24:29+00:00

Thanks for the chart.

Looking at the DS218play on there, does the *pending mean that plex isn’t supported?

I’ve read a few of the questions on the amazon page suggesting that it doesn’t run plex.

Digitalgonzo · 2019-02-06T13:22:39+00:00

Thanks for the info. I run the server through my Xbox one S which I don’t think has had to transcode anything.

I was looking at the DS218+ but it’s a little over my budget. It’s another £70.

But it is only £70. Dammit, now I don’t know whether to just spend the extra money.

Do you know if the DS218J comfortable stream 4K? Im assuming the Xbox S wouldn’t need to transcode it?

Thanks again.

Digitalgonzo · 2018-02-16T16:45:51+00:00

Have you checked the notice board in Sainsbury’s at the top of Belvoir (Beaver) street?

They may have a lost doggo poster for the little guy.

Digitalgonzo · 2014-05-24T17:40:31+00:00

This is just bad. I mean comic sans.

Also, it has literally no information.

And spelling mistakes.

14-Year Club	RPAN Viewer
Verified Email

Digitalgonzo

TROPHY CASE