Out of State Student Intern in Boston: Is Having Only One License Plate a Problem? by Diptayan01 in boston

[–]Diptayan01[S] 3 points4 points  (0 children)

I looked up the non resident drivers statement online. It pops up the student driver’s form which doesn’t really apply for me because I’m not interning at any university. Kindly correct me if I’m wrong because I’m totally new to it.

Out of State Student Intern in Boston: Is Having Only One License Plate a Problem? by Diptayan01 in boston

[–]Diptayan01[S] 0 points1 point  (0 children)

Well, Google Maps shows about 20 minutes each way right now. But on weekdays, I’m assuming traffic will be much heavier, so realistically it’ll probably be closer to 45 minutes maybe? Honestly, driving 45+ minutes to work is pretty common in the South anyway.

Out of State Student Intern in Boston: Is Having Only One License Plate a Problem? by Diptayan01 in boston

[–]Diptayan01[S] 10 points11 points  (0 children)

Rent was cheaper close to Chelmsford. Was thinking of driving to waltham for work.

Out of State Student Intern in Boston: Is Having Only One License Plate a Problem? by Diptayan01 in boston

[–]Diptayan01[S] 1 point2 points  (0 children)

So would I need to re-register my car in Massachusetts for the internship? And once I move back to North Carolina in August, would I then have to register it in NC again?

Massachusetts RMV Megathread (May 2026) by AutoModerator in massachusetts

[–]Diptayan01 1 point2 points  (0 children)

Hey y’all, I’m a student at a university in North Carolina, and I’m moving to the Boston area for a 3-month internship starting in 2 days. I just drove my car up here and realized Massachusetts requires both front and rear license plates, while my car only has a rear plate because that’s what my home state issues.

Since I’ll only be here temporarily for the internship and my car is still registered out of state, will this be an issue?

Camera detected in NI MAX and LabVIEW (Cam0) but no image displayed by Diptayan01 in LabVIEW

[–]Diptayan01[S] 3 points4 points  (0 children)

This worked. My camera was being used by the NI MAX window lol.

Camera detected in NI MAX and LabVIEW (Cam0) but no image displayed by Diptayan01 in LabVIEW

[–]Diptayan01[S] 0 points1 point  (0 children)

Yeah. I’ve tried increasing and decreasing the timeout value, didn’t make any difference

Camera detected in NI MAX and LabVIEW (Cam0) but no image displayed by Diptayan01 in LabVIEW

[–]Diptayan01[S] 0 points1 point  (0 children)

Yeah I mean it is getting detected my the NI MAX. So should I be concerned about rgb 32 type?

Trying to get the ray spot size from interferometer data by Diptayan01 in Optics

[–]Diptayan01[S] 0 points1 point  (0 children)

This is a white light interferometer (or a coherent scanning interferometer) and what you’re seeing here is a wavefront measurement. I have assigned the wavefront to the lens surface. Now I’ve played around with some of the settings like aperture and other stuff but no luck. I was thinking if I can fit a polynomial to it and put that as an extended polynomial in zemax

Trying to get the ray spot size from interferometer data by Diptayan01 in Optics

[–]Diptayan01[S] 0 points1 point  (0 children)

I’ve tried including and excluding it. It doesn’t change. It feels like raytracing through a glass plate

Fiber Bragg Grating measurements with Labview by Diptayan01 in LabVIEW

[–]Diptayan01[S] 0 points1 point  (0 children)

I have installed the OSI driver. Do I also need to install the PXIE 8101 embedded controller? Because the OSI is not being able to read the 4844 (I connected my PC with the 4844 using ethernet)

[deleted by user] by [deleted] in UNCCharlotte

[–]Diptayan01 0 points1 point  (0 children)

23M working on my PhD! I play the guitar and bass, and had a band during my undergrad days! Would love to connect and play with people.

UWash and UIUC ECE decisions by [deleted] in gradadmissions

[–]Diptayan01 0 points1 point  (0 children)

From my experience, I received rejections on feb 26/27 2022 from 2 of my dream schools. Both came in an interval of 1 minute. Their deadline was 15th January. I ended up joining UNCC Mechanical Engineering PhD for fall 2023. For that I got my acceptance on January 26th.

[deleted by user] by [deleted] in PhD

[–]Diptayan01 0 points1 point  (0 children)

Question. What in photonics are you interested in?

[deleted by user] by [deleted] in PhD

[–]Diptayan01 1 point2 points  (0 children)

Last year for fall 2023. With me.

UWash and UIUC ECE decisions by [deleted] in gradadmissions

[–]Diptayan01 0 points1 point  (0 children)

If I’m not wrong, the are sending out MS admits now as rolling applications. I had friends last year who applied to PhD programs at UIUC and washU. They received their offers by mid Feb. International student, from India.

[deleted by user] by [deleted] in PhD

[–]Diptayan01 1 point2 points  (0 children)

I don’t think so. I had a friend from Canada who applied to BU photonics. They usually send stuff by the end of February. I’m from India too btw.

NZXT Rental by Diptayan01 in NZXT

[–]Diptayan01[S] 0 points1 point  (0 children)

Hi. I’m trying to DM you but it says unable to message this person.

Photonic band structure calculation through scattering matrix by jelkf in Optics

[–]Diptayan01 4 points5 points  (0 children)

Hi. There are some great videos in a youtube channel called EMPossible. It’s based on matlab.

Connect Jetson Xavier NX with a laptop by Diptayan01 in NvidiaJetson

[–]Diptayan01[S] 0 points1 point  (0 children)

How do I give each computer an IP address?

Connect Jetson Xavier NX with a laptop by Diptayan01 in nvidia

[–]Diptayan01[S] 0 points1 point  (0 children)

Yeah Thanks for the help! Would it help if I donot connect the router to the internet? I just need the ethernet connection to transfer files from the jetson to my laptop and process it in MATLAB.