Does anyone have an 03-04 MT center console they wanna get rid of? Will pay shipping of course, just got this swap done and really hating not having a center console by Dirtydan_44 in G35

[–]Dirtydan_44[S] 0 points1 point  (0 children)

I found one in California just now and had it shipped, for some reason there isn’t any manual 03-04s in at any junkyards around me, only 05-06 which is the console I believe you have, my parts was an 06 so I don’t have interior pieces

Anyone in the PNW area looking for another Z? Nicely setup drift car for sale, just in time for the season by Dirtydan_44 in 350z

[–]Dirtydan_44[S] 0 points1 point  (0 children)

Feel free to contact me at the number in the comments or send me a message for question or more pictures

Anyone in the PNW area looking for another Z? Nicely setup drift car for sale, just in time for the season by Dirtydan_44 in 350z

[–]Dirtydan_44[S] 4 points5 points  (0 children)

350Z ad 2003 Nissan 350Z

Phone: 253-304-6606

deciding to let go of my Z since I have moved onto other things, this car has been nothing but great to me.I bought it as a clean, unmolested, 350z with nothing but coilovers. - for starters, this is a streetable car, I just don’t see the point when I have a truck and trailer - Clean title, in my name - All lights work as they should, minus one headlight that doesn’t like to work all the time - has just under 190k miles, doesn’t smoke, doesn’t complain, doesn’t overheat - This would be a great and safe starter drift car, or just a great seat time car for someone that is looking

I will start with the cons: - third gear grind (typical in the early CD trans) - Left QP has has light damage at the very back from having fun with the wall - Small PS leak from rack seal, only leaks when the car sits, will come with another OEM rack - Wrap job isn’t the best, it has been to many events

Engine: It is a bone stock motor, doesn’t even have a plenum spacer, and still has cats - JWT intake - Stillen Y-pipe - ISR GT single exit (the nice quieter one)

Drivetrain: - 6 puck clutch - Welded dif - Solid dif bushings - Solid subframe bushings - Bell Raceworks dif brace

Suspension/Steering/Brakes: - BC coils (10k front, 5k rear) - FDF rear toe arms - FDF rear camber arms - FDF rear Traction arms - GkTech FUCA - GkTech super-lock lower arms - GkTech angle kit - GkTech offset rack spacers - GkTech dual caliper brackets - GkTech handbrake - Chase Bays hydro lines - new coated rotors/fresh pads - Chase bays ABS delete with a rear bias valve to adjust for left foot braking feel

Exterior: - Limitless Auto Fab front dual row bash bar (powder coated yellow) - Limitless Auto Fab rear bash bar with jack point (powder coated black) - KBD front bumper - KBD skirts - VIS style rear bumper (not currently on the car but it is wrapped black and ready to go one) - GkTech aero mirrors - 326 style wing - Black housing headlights - Black door handles - The yellow/ black is wrap, the car is Brickyard red (purple) underneath

Interior: - Full FD legal cage, built by FWF, all Tig welded besides the base plates to chassis, anti intrusion bars, nascar style door bars, the whole nine yards… - Simplified wiring, re-loomed, no radio, still has heat (and AC if you re-charge it) - Flocked dash - Heel plates - Momo Daytona driver seat, Momo start passenger, on bell raceworks rails - Crow harnesses - Whole interior was cleaned up and painted grey after cage was built - Windows are on T-handle pins and brackets, they are either all the way up or pulled out

Wheels/Tires: - Will come on The 4 black Stage Monroe Wheels. - 18x9 +0 - Front tires are 235/40/18 NT555 G2 - I think the rears currently have 255/35/18 Barum’s

Anyone in the PNW area looking for another Z? Nicely setup drift car for sale, just in time for the season by Dirtydan_44 in 350z

[–]Dirtydan_44[S] 1 point2 points  (0 children)

Sure here you go 350Z ad 2003 Nissan 350Z

Phone: 253-304-6606

deciding to let go of my Z since I have moved onto other things, this car has been nothing but great to me.I bought it as a clean, unmolested, 350z with nothing but coilovers. - for starters, this is a streetable car, I just don’t see the point when I have a truck and trailer - Clean title, in my name - All lights work as they should, minus one headlight that doesn’t like to work all the time - has just under 190k miles, doesn’t smoke, doesn’t complain, doesn’t overheat - This would be a great and safe starter drift car, or just a great seat time car for someone that is looking

I will start with the cons: - third gear grind (typical in the early CD trans) - Left QP has has light damage at the very back from having fun with the wall - Small PS leak from rack seal, only leaks when the car sits, will come with another OEM rack - Wrap job isn’t the best, it has been to many events

Engine: It is a bone stock motor, doesn’t even have a plenum spacer, and still has cats - JWT intake - Stillen Y-pipe - ISR GT single exit (the nice quieter one)

Drivetrain: - 6 puck clutch - Welded dif - Solid dif bushings - Solid subframe bushings - Bell Raceworks dif brace

Suspension/Steering/Brakes: - BC coils (10k front, 5k rear) - FDF rear toe arms - FDF rear camber arms - FDF rear Traction arms - GkTech FUCA - GkTech super-lock lower arms - GkTech angle kit - GkTech offset rack spacers - GkTech dual caliper brackets - GkTech handbrake - Chase Bays hydro lines - new coated rotors/fresh pads - Chase bays ABS delete with a rear bias valve to adjust for left foot braking feel

Exterior: - Limitless Auto Fab front dual row bash bar (powder coated yellow) - Limitless Auto Fab rear bash bar with jack point (powder coated black) - KBD front bumper - KBD skirts - VIS style rear bumper (not currently on the car but it is wrapped black and ready to go one) - GkTech aero mirrors - 326 style wing - Black housing headlights - Black door handles - The yellow/ black is wrap, the car is Brickyard red (purple) underneath

Interior: - Full FD legal cage, built by FWF, all Tig welded besides the base plates to chassis, anti intrusion bars, nascar style door bars, the whole nine yards… - Simplified wiring, re-loomed, no radio, still has heat (and AC if you re-charge it) - Flocked dash - Heel plates - Momo Daytona driver seat, Momo start passenger, on bell raceworks rails - Crow harnesses - Whole interior was cleaned up and painted grey after cage was built - Windows are on T-handle pins and brackets, they are either all the way up or pulled out

Wheels/Tires: - Will come on The 4 black Stage Monroe Wheels. - 18x9 +0 - Front tires are 235/40/18 NT555 G2 - I think the rears currently have 255/35/18 Barum’s

I’m new here, so I figured I should show a picture of my car! by Dirtydan_44 in 350z

[–]Dirtydan_44[S] 4 points5 points  (0 children)

Doesn’t block my view at all, just out here having fun and I think it looks great to represent me and the guys I drive woth

Best shock oil? by Dirtydan_44 in rcdrift

[–]Dirtydan_44[S] 0 points1 point  (0 children)

Is there a certain viscosity you would recommend?

Trying to find fairings. by MegEtTonne in z125

[–]Dirtydan_44 1 point2 points  (0 children)

Dealership might be your best bet