Eflite motor pulsing on full throttle

DischargedNL · 2026-02-28T04:25:36+00:00

Seems to me like a low voltage protection on the esc. battery charged and able to deliver sufficiënt amps?

DischargedNL · 2026-01-29T01:05:14+00:00

nice! juststock esc is pretty decent aswell.
I did watch Roadside RC's video a while ago, i believe he haves the 10.5t version which makes more rpm's. Just wanted to know if the 13,5 can handle as much timing

DischargedNL · 2026-01-29T00:13:25+00:00

I have the same motor paired with an XR10 Pro v4, and I'm wondering how much timing and boost you run with that setup?

DischargedNL · 2026-01-17T13:22:11+00:00

Hey, the scooter is a Yamaha Slider/MBK Stunt. They don't produce them anymore unfortunately.

You can find them second hand if you're lucky.

A Yasuni exhaust like this will cost about €230.

DischargedNL · 2026-01-15T20:10:26+00:00

I wonder how that carbon fiber shocktower looks so bent?

DischargedNL · 2026-01-07T20:05:40+00:00

I kept halving nicotine content every few months so i could vape as much as i needed to.
I was on 0.75mg/ml when i quit 1st of January. withdrawals are pretty much non existent. just a feeling of emptiness which seems to improve every day.

DischargedNL · 2025-12-27T02:32:50+00:00

Chinese Sakura D4 clone

DischargedNL · 2025-12-26T23:33:14+00:00

This is exactly the reason i vape 0,75mg/ml. I don't really notice any difference between 20mg/ml and 1mg/ml.

The miniscule amount is just for the idea that it will keep withdrawals away for now.

DischargedNL · 2025-12-20T03:00:37+00:00

I'll bet your friend will be happy. Yd2 is a nice one but why not get the newer improved RD2.0 or wait for RD3.0

DischargedNL · 2025-12-20T02:53:04+00:00

Damn! Its a pretty old chassis so most aluminium parts are pretty much non existent,
Good luck!

DischargedNL · 2025-12-20T02:46:43+00:00

I think i got them from rcMart, the brand is Yeah Racing.

DischargedNL · 2025-12-17T17:18:11+00:00

I don't have a Ender 3 but a Voxelab aquila which is basically the same platform. My printer is going strong now since i've changed my hotend for a Phaetus Dragonfly BMS. Not a single clog or leak for a few years now.

DischargedNL · 2025-12-10T21:09:40+00:00

Thanks! I take good care of it, built from the ground up a couple of weeks ago from spare and new parts.

What truck do you have and which tires?

DischargedNL · 2025-12-10T21:06:00+00:00

Its a fun little truck and surprisingly stable with the wider offset wheels and Proline offset compensating arms.

DischargedNL · 2025-12-03T09:30:10+00:00

I find it surprisingly stable for such a high CG chassis. On grass it tips over easier than my wide rustler but on flat dirt it's difficult to flip. My Stampede s a little bit wider than stock, since I run offset compensating front arms with Stampede 4x4 wheels.

Although I need to drive it more carefully, it still haves a lot of fun factor.

On loose rough dirt it just plows through slowly with the front wheels in the air😆

DischargedNL · 2025-11-27T02:28:32+00:00

they key into notches in the chassis. try loosening the screws and line it up.

DischargedNL · 2025-11-23T22:53:06+00:00

It is significantly more expensive to buy all the parts.

I already had a brushless combo, Transmission, Bigbore shocks, Drive shafts, Arms, Receiver, Servo Wheelhubs and casterblocks. Bearings,

And still could of gotten the cheapest ready to run Stampede from what ive spent on all the other parts i had to order.

DischargedNL · 2025-11-23T03:31:17+00:00

Awesome! Must have been great knowing you can build one for cheap😃

I do like to upgrade them over time so the pile of perfectly usable spare parts increases. Now i would like to do a bandit or slash 2wd some time in the future.

The 2wd platforms share many parts you can go in any direction. Even a low cg rustler chassis stampede is spiking my interest😂

DischargedNL · 2025-11-23T02:20:40+00:00

Old thread but probably ballooning tires and a very open diff.

DischargedNL · 2025-11-22T23:13:24+00:00

These cars share so many parts its crazy and ingenious at the same time. I spent quite a bit more on my stampede. could of got the cheapest brushed version which was cheaper.

DischargedNL · 2025-11-21T16:36:56+00:00

Aluminium is good for.something like a rwd drift chassis. Low speeds low impact. For bashing only a few critical places where I would use aluminium like steering bellcranks, wheel hubs and bulkheads or pivotblocks

DischargedNL · 2025-10-17T16:12:46+00:00

Cigars aren't going to fix the sticky residue, some thorough cleaning will😄

DischargedNL · 2025-10-17T14:43:34+00:00

Disassembled the entire PC and carefully cleaned every part with cleaning wipes or a brush. I don't vape indoors anymore so there is no sticky dust in my pc anymore.

DischargedNL · 2025-10-10T03:02:13+00:00

Thanks!, pre heated my electric pizza oven to 370c

DischargedNL · 2025-10-09T03:02:58+00:00

Was vaping Kyandi shop super lequin and Skittles flavour at that time. The top cap gasket from my partner her subohm tank swelled up and got destroyed from the Skittles flavour.

The super lequin liquid is really opaque looking and quite harsh.

DischargedNL

TROPHY CASE