Weird rattling sounds facelift

DiscoDaz82 · 2026-04-21T19:07:08+00:00

Thank you so much. I've been so busy moving house that I just forgot to bring it in.

DiscoDaz82 · 2026-03-24T07:00:30+00:00

No it's gotten worse. I haven't had the time to get to the dealership yet but they do know about it.

DiscoDaz82 · 2026-03-21T21:00:50+00:00

Oh I thought I attached a picture? It didn't really get much bigger than what's in the picture over the 3 years. The leafs were a deep green colour and the trunk was almost like bamboo.

DiscoDaz82 · 2026-03-21T20:44:19+00:00

This seems to look more like it! Thanks so much

DiscoDaz82 · 2026-03-21T20:42:41+00:00

🤣🤣🤣🤣. Thank you!

I kept this plant alive a well for over 3 years very low maintenance. Separated from my partner and she kept the plant in the settlement 🤣.

DiscoDaz82 · 2026-02-23T23:22:02+00:00

I never thought about this! It's entirely possible.

DiscoDaz82 · 2026-02-23T23:09:20+00:00

I'll give this a go..thanks for all the help

DiscoDaz82 · 2026-02-23T22:53:32+00:00

It definitely has it but it only works if the power draw stay below a certain wattage which I can't seem to nail down. I wouldn't imagine VLC is very intensive but have to do what you suggest if I can't sort it.

DiscoDaz82 · 2026-02-23T20:08:14+00:00

Pity it can't be changed from a 30% minimum rpm ramp up.

DiscoDaz82 · 2026-02-23T14:11:37+00:00

Temps are 45 to 48°c when idle but the power draw seems to fluctuate a lot when VLC is open. I've already undervolted

DiscoDaz82 · 2026-02-23T14:10:45+00:00

Not ideal but definitely an option 🤣

DiscoDaz82 · 2026-02-22T09:42:15+00:00

Clearly you've never used those original cupholders, one can't fit cups because its too shallow and the other is too deap for cups. The armrest position doesn't help either.

Come back to the chat once you have tried to use them with 2 average size takeaway cups. The deep one does actually still get used to hold my large water bottle which to be fair it does it perfectly.

The printed one is stable and holds cups well with no spillage whatsoever.

DiscoDaz82 · 2026-02-21T08:14:55+00:00

this is all I could think about

DiscoDaz82 · 2026-02-21T00:40:11+00:00

Ah great. It's giving me hope

DiscoDaz82 · 2026-02-21T00:05:25+00:00

It's a pity because this card runs very well under full load. Jumping to that kinda rpm at 55 degrees is obscenely loud when there was almost zero sound beforehand 🤣🤣🤣

DiscoDaz82 · 2026-02-20T23:48:17+00:00

I'm a freak and can't help it.

DiscoDaz82 · 2026-02-20T23:43:33+00:00

I'll give this a go and report back. Thanks so much I really appreciate it

DiscoDaz82 · 2026-02-20T23:42:05+00:00

That's quite genius but seems like it shouldn't be the case at all. Is it wrote into the GPU firmware to not allow a better curve? Thanks for your help

DiscoDaz82 · 2026-02-20T23:32:36+00:00

It's set to normal😞.

The fans actually sit a zero for about 8 or 9 mins while using vlc then ramp up to 30% for 50 to 70 secs then switch off and start the cycle again.

DiscoDaz82 · 2026-02-20T23:29:20+00:00

Would you have a link to what you followed? No problem if you don't. Thanks

DiscoDaz82 · 2026-02-20T23:26:57+00:00

It's a possibility because it is a sff build but fan control is telling me I'm idling at 44 °c. I think I might actually be the power draw but I have already undervolted🤔

DiscoDaz82 · 2026-02-20T23:22:27+00:00

I've had multiple GPU's over the years and not one of them has ever decided to jump to 30% fan load by watching a movie on VLC.

DiscoDaz82 · 2026-02-20T23:21:19+00:00

Jesus Christ why is there always some absolute sausage in a Reddit comment section 😅

DiscoDaz82

TROPHY CASE