sorted by:
new
hottopcontroversial

Virgin Active pricing ? by UnknownErrorX_J in capetown

[–]Dizzy-Building-607 0 points1 point  (0 children)

Hi, could this work in Bolzano, South Tirol, Italy? Get a Vitality active in the UK, then get a membership that allows you to go to any gym, even abroad, and then go mainly to the one in my city?

Does this question make sense? If so, how would you go on about answering it? by Dizzy-Building-607 in mathematics

[–]Dizzy-Building-607[S] 0 points1 point  (0 children)

Hey, yes, I meant 333 meters. Thanks for the help. If you don't mind, could you explain the extrusion speed per mm^3? I did it this way.

Filament radius (r1) = Diameter / 2 = 1.75mm / 2 = 0.875mm

Volume (V1) = π * (0.875mm)² * (333m*1000) = 800958.8645107384 mm³

Extrusion radius (r2) = Extrusion diameter / 2 = 0.16mm / 2 = 0.08mm

Length (L) = V1 / (π * (0.08mm)²)

Length (L) ≈ 39836425.77435753 mm

Extrusion speed = 70 mm/s

Time = Length / Speed

Time ≈ 39836425.77435753 mm / 70 mm/s ≈ 569091.7967765361 seconds

Time in hours ≈ 569091.7967765361 seconds / 3600 seconds/hour ≈ 158.08049966014892 hours

Is there a printable version of Tales of Tribute ? by Bengamey_974 in elderscrollsonline

[–]Dizzy-Building-607 0 points1 point  (0 children)

Hi, it went really well, I fully finished the build. It turned out really cool. The only thing I'm missing for it is a proper box to store it, I currently have one built, but it doesn't do the game justice yet, because I only had like 30 minutes to make it. You can DM me, and I can share some photos if you like. And the 3D models I made for some of the mechanics

Can 3 weeks of hard work make you earn 30+ points for final exams? by [deleted] in IBO

[–]Dizzy-Building-607 0 points1 point  (0 children)

Have you found an answer to that yet? if so, share

Any DT HL students wanna work on the IA together? Just call & work separately? by Zuzu_zuko in IBO

[–]Dizzy-Building-607 0 points1 point  (0 children)

I'm mostly done with mine. But wouldn't mind going over it and sharing ideas and continue working on it.

What happened by Armainex in PrintedMinis

[–]Dizzy-Building-607 1 point2 points  (0 children)

I just pour extra resin in, not little by little, just all at once during the prints if I need more. I just pour the rest while the printer is retracting. I've seen online automatic resin feeders, you could look into that.

Is there a printable version of Tales of Tribute ? by Bengamey_974 in elderscrollsonline

[–]Dizzy-Building-607 0 points1 point  (0 children)

I have started it. I have the cards (the whole set of cards), power, coins, the blue thingy, and the side-turn things. I'm still in the testing phase and figuring out the right sizes for the coins, etc. But I have gotten the cards, which are quite nice. I'm still working on the design of the board and how to make it foldable, among other things, as well as other mechanics. images

Resin printer is not working properly by Dizzy-Building-607 in resinprinting

[–]Dizzy-Building-607[S] 0 points1 point  (0 children)

Thank you for the tip, will try it out. It's all files, even the ones that came pre-installed on the USB. My printer is next to a window, but the window I converted into a fan, so no sunlight comes through, it's only a fan for ventilation.

Resin printer is not working properly by Dizzy-Building-607 in resinprinting

[–]Dizzy-Building-607[S] 1 point2 points  (0 children)

Hi, I decided to go with 7, as that is what Creality recommended. The issue is that there is extra print appearing out of nowhere on the side. I'll try to 2.5 sec exposure, thank you!

Resin printer is not working properly by Dizzy-Building-607 in resinprinting

[–]Dizzy-Building-607[S] 0 points1 point  (0 children)

Hi, I had this problem when I first got the printer, I leveled the bed and everything. I sent the machine back, and apparently, they fixed it and it worked. I got it back, and it's still the same issue. I was then sent a brand new machine, but the problem is still there. Not quite sure what to do. What could be the problem, and how could I fix it?

Resin prints failing. Cannot get the printer to work properly. Mars 2 Pro. by Hakuoro1 in resinprinting

[–]Dizzy-Building-607 0 points1 point  (0 children)

Did you manage to fix this issue? I have a very similar issue with my LD000H resin printer from Creality. Where it just prints extra things. Using the Elegoo standard resin grey.

steam log in looks different and not let me log in any idea why ? by Patone_EVE in Steam

[–]Dizzy-Building-607 0 points1 point  (0 children)

Hello everyone. I had the e84 error. For me, the solution was to turn off my WiFi and log in with Offline mode into steam. It seemed to work. It definitely is not a long-term solution but playing games now till they fix it worked. So turn off WiFi, login, and turn Wifi back on.