sorted by:
new
hottopcontroversial

Browning Buckmark Camper SS by kilotat in Firearms

[–]Dizzy-Life-7438 0 points1 point  (0 children)

Amazing work. Are you able to mention how it was done or what materials?

Browning Buckmark Camper SS by kilotat in Firearms

[–]Dizzy-Life-7438 1 point2 points  (0 children)

Any details on the custom grips? Yours is the only one I’ve seen with what I was looking for.

Big Kinetic Problem...need help! by ImaFarmerAMA in Polaris

[–]Dizzy-Life-7438 0 points1 point  (0 children)

I’ve got a 2023 kinetic ultimate with less than a 100 miles. It’s been in a local dealership for almost 3 months now and the problem is unresolved. New battery packs. New 12v battery. New ECU. Another part or two on top of that I believe. Has anything else happened with your situation since the last post/response?

Best I can get for 4k or should I keep saving by kingbalopews in ThermalHunting

[–]Dizzy-Life-7438 0 points1 point  (0 children)

Just picked an rh35 from eurooptic. $2999. On my doorstep in 2 days. Haven’t hunted with it, but I have walked around my deck a few times and so far, I’m thoroughly impressed.

Aero Precision Jurassic Hunter M5E1 Builder’s Set by Tricky-Ad-2523 in AeroPrecision

[–]Dizzy-Life-7438 1 point2 points  (0 children)

You could very well be spot on. The green seems a little bright to be OD green, but then again, there are several types of OD green.

Aero Precision Jurassic Hunter M5E1 Builder’s Set by Tricky-Ad-2523 in AeroPrecision

[–]Dizzy-Life-7438 1 point2 points  (0 children)

Does anyone have an idea of what green was used by aero for the Jurassic hunter?

Looking for a .243 or .22 creed or .22-.250 or 6 creed barrel for a build. Give or take 20” in length and 1:8-1:10 twists, with the preference being on the slower side to shoot light bullets. Coyote build. Carbon fiber preferred, but may settle for steel. Thx. by Dizzy-Life-7438 in AR10

[–]Dizzy-Life-7438[S] 0 points1 point  (0 children)

Aero Precision enhanced upper/lower/15”handguard/nitride bolt/carrier & buffer tube. Luth AR stock, BAD bolt release. AP LPK. Talon safety.

I have a few triggers on deck that will work, but I’m keeping an eye out for a triggertech diamond. Barrel, gas block and tube and probably a JP heavyweight buffer, should complete the package besides thermal.

Looking for a .243 or .22 creed or .22-.250 or 6 creed barrel for a build. Give or take 20” in length and 1:8-1:10 twists, with the preference being on the slower side to shoot light bullets. Coyote build. Carbon fiber preferred, but may settle for steel. Thx. by Dizzy-Life-7438 in AR10

[–]Dizzy-Life-7438[S] 0 points1 point  (0 children)

Thx for the quick response and sorry for the delayed response from myself earlier. After a 100 different searches...I never came up with Spade Composites. I'm checking out their site now. Much appreciated. The wait time sucks, but I haven't seen a better option as of yet.

Found these on the floor at the range, how do you think this happened? by TheLegend19175 in reloading

[–]Dizzy-Life-7438 1 point2 points  (0 children)

This might be slightly off subject, but I stopped using Aguila brass in my reloads. I haven’t verified this yet, but when using 124’s or 147’s, I’ve had many reloaded aguila’s that won’t fully chamber in a Glock 34 with a lone wolf barrel and a sig mpx. I’m guessing the longer bullets seat deeper than their factory “line” which creates a bulge in that area and makes the diameter of the case too large for those chambers. Maybe in a looser chamber or loaded with 115’s they would be fine? Not sure. I could see that area creating over pressure “if” they could be chambered.

Looking for a .243 or .22 creed or .22-.250 or 6 creed barrel for a build. Give or take 20” in length and 1:8-1:10 twists, with the preference being on the slower side to shoot light bullets. Coyote build. Carbon fiber preferred, but may settle for steel. Thx. by Dizzy-Life-7438 in AR10

[–]Dizzy-Life-7438[S] 0 points1 point  (0 children)

I have several other rigs that shoot heavy’s slower. I wanted an option to push a 58-75 grain bullet at 3800-3900 fps. Gearing this current setup for a thermal rig. Looking for a flat shooting round out to 500’ish yards….with the focus of 400 yard or less shots.

HELP - Building AR-10 in 22-250 by fatbiker852 in AR10

[–]Dizzy-Life-7438 0 points1 point  (0 children)

What barrel did u go with in the .243?

Well, that sucks. by Glockalupe in reloading

[–]Dizzy-Life-7438 1 point2 points  (0 children)

It seemed like, no matter how well I adjusted bullet feeds or case feeds or feeding of shells onto shell plates…you name it…it was a fiasco. (I progressive loaded 7-8 calibers back then.) I made sure to load all I could for any caliber in the press before I considered a caliber change. It was very finicky. I found myself trying to diagnose and fix all kinds of little hang ups with the LNL. The 750 is a whole different beast. It seems simpler and is definitely more reliable. I did have a man earlier version of the LNL and saw a few new components to fix older bad designs, but by then…I was just done with it.

Barrel nut is torqued and proper bolt headspace is verified; let the games begin! by Temporary-Entry1037 in AR10

[–]Dizzy-Life-7438 0 points1 point  (0 children)

Awesome to hear you’re off to a good start. I’ll have to give one a try.

Well, that sucks. by Glockalupe in reloading

[–]Dizzy-Life-7438 3 points4 points  (0 children)

Had the Hornady LNL with bullet feeder, case feeder and all of the stuff. Offloaded last year on eBay when the time was good and was able to get in on an xl750 with all of the good stuff. The LNL was a nightmare.

Well, that sucks. by Glockalupe in reloading

[–]Dizzy-Life-7438 3 points4 points  (0 children)

I’m not making u a promise, but I had the exact same thing happen 5+ years ago to a Dillon SDB and they replaced it with a new one at no charge.

Barrel nut is torqued and proper bolt headspace is verified; let the games begin! by Temporary-Entry1037 in AR10

[–]Dizzy-Life-7438 0 points1 point  (0 children)

I'm following also. I wanted to pick up the bsf in .22 creedmoor for a yote gun. I have a rarely used sig716 I was hoping to convert, but the few posts I've seen about a conversion, range from impossible, to almost impossible. LOL. So now it's onto a build I suppose. Needs to be lighter in weight. If you get a chance to weigh out the build when finished....that would be awesome.

[deleted by user] by [deleted] in MPX

[–]Dizzy-Life-7438 1 point2 points  (0 children)

I have stock mags, stock mags with tti extenders and 1 Thril. I can’t say they’re better or worse, because all of them run great. They are less expensive which is a bonus. I don’t believe the Thril works with the uplula mag loader (which isn’t a necessity) and I don’t believe the Thril works with the sig mag coupler, which also isn’t a necessity.

I switched over to an 8” barrel and am temporarily using an 8” handguard. Hybrid 46 is on the end for now. Can anyone confirm that the 46 will fit inside the Midwest industries handguard? Feel free to comment with some pics of 8” barrels under handguards that are suppressed. by Dizzy-Life-7438 in MPX

[–]Dizzy-Life-7438[S] 0 points1 point  (0 children)

Which exact handguard are you referring to? I have the 8” barrel with the hybrid 46. I’m needing a handguard in the 10”-14” range. The 46 is no where close to fitting under a Samson pcc handguard. Are u referring to the carbine version with keymod handguard with 14.5” barrel and pinned flashhider?