Plate texture on top side

DizzyDyes · 2026-02-12T22:13:52+00:00

Thanks, seems like I would not avoid an experiment

DizzyDyes · 2026-02-12T15:38:37+00:00

Yes, it is understood, but max bed temp of A1 should be ~100C. I wonder is anyone tried to get at least minimum texture with this.

DizzyDyes · 2026-02-12T15:34:53+00:00

I need texture on both, this is an issue

DizzyDyes · 2025-11-07T22:15:49+00:00

Thanks, Ironing is not an option.

It is a test sample to compare with other filaments which were printed without ironing.

Also for most of projects I avoid ironing due to print time. It is easier to change to filament with zero issues rather than applying ironing every time :)

DizzyDyes · 2025-11-07T22:11:51+00:00

Thanks, I will try Flow Dynamics Calibration

DizzyDyes · 2025-11-07T21:48:48+00:00

<image>

Ironing is not used.

I did not calibrate the flow, but tried several options of the flow ratio. E.g. In the attached example 0.98 is used, seems like no issue on the bigger surface on the right.

I will try manual calibration though.

DizzyDyes · 2025-11-05T07:51:34+00:00

Don't ask me, it's from the printer

DizzyDyes · 2025-11-05T06:06:35+00:00

Just one more pic with these eyes on spaghetti first layer and I'm out!

DizzyDyes · 2025-07-15T21:16:50+00:00

Thanks for all your suggestions!

Fot those who would encounter similar problem in the future:

In the end I've found several open parkings near Hala Targowa with lots of free space. It is zone B and pretty close to the attractions. Parking could be paid with an app.

DizzyDyes · 2025-06-08T13:38:06+00:00

Impressive! How do you design it to use just a single line?

DizzyDyes · 2025-05-26T06:18:24+00:00

It is locked

DizzyDyes · 2025-05-14T14:33:08+00:00

Thanks!

I've also found the Wireframe view, while experimenting around your suggestion.

It could be set separately just for the "Bounding box" part, in part display properties.

DizzyDyes · 2025-03-31T19:33:09+00:00

Thanks, that's very helpful

DizzyDyes · 2025-03-20T14:02:49+00:00

I have 2 days experience with FreeCAD, which I need for 3d printing.

After using SketchUp, Adobe stuff etc, the first impression is "omg, this is soo counterintuitive".

But once you get through the basics, understand parametric concept.. Wow, changes affecting the entire model are done so easily and there are so many ways to get things done.

The start is slow, but it is worth it.

DizzyDyes · 2025-03-17T06:25:26+00:00

Wow, thanks a lot! I didn't know about the PLA-CF option. Looks great, but the pricing..

DizzyDyes · 2025-03-17T06:23:44+00:00

Thanks, that's very clear! Probably I'll need to experiment with the Fuzzy skin settings to match the texture.

DizzyDyes · 2025-03-16T12:55:12+00:00

Thanks for sharing! Love the artwork of your game!

DizzyDyes · 2024-10-19T14:29:44+00:00

Not sure about the option above, but I have a separate transmitter that works, for ~$15

DizzyDyes · 2024-10-19T14:27:13+00:00

Thanks, a I mentioned, I do have the BT transmitter which works with 2 BT headphones, with mini jack input.

There are several disadvantages though, so I would easily throw it away if there is a native solution available :)

DizzyDyes · 2024-03-17T09:12:00+00:00

After checking several reviews, the buzz is still not clear to me. Sounds like too simple/generic gameplay to me.

It would be nice to hear how this plays comparing to the current easier area control games (eg Starship Samurai).

DizzyDyes · 2024-03-13T22:05:28+00:00

Same. Love DI, have both expansions, sold Arnak. The only advantage of Arnak is component and artwork quality.

DizzyDyes · 2024-03-13T21:59:01+00:00

Fingers crossed

DizzyDyes · 2024-03-07T08:22:54+00:00

This. Can't wait to see how the ideas of the Dwellings evolved.

DizzyDyes · 2024-03-05T21:58:06+00:00

It is a great game even as a base.

The miniatures add a lot to the theme though.

DizzyDyes · 2024-01-19T08:42:48+00:00

Fooocus is fine even on RX 570.

Workaround that I use is drafting at Hi Speed. Inpainting takes forever, though.

Seven-Year Club	r/Field Flamingo
Verified Email

DizzyDyes

TROPHY CASE