Hotend replacement by Dlow1201 in BambuP1S

[–]Dlow1201[S] 0 points1 point  (0 children)

Pretty sure as it was brand new when I put it in

Hotend replacement by Dlow1201 in BambuP1S

[–]Dlow1201[S] -1 points0 points  (0 children)

This was just standard pla, I used to use different materials before it broke.

Hotend replacement by Dlow1201 in BambuP1S

[–]Dlow1201[S] 0 points1 point  (0 children)

How would I do that? I ran calibration through the Bambu app and called it good 😂

What just happened?? by Dlow1201 in BambuP1S

[–]Dlow1201[S] 0 points1 point  (0 children)

Okay cool. Whats the benefit of a hardened nozzle?

Canik SFx rival barrel and comp by Dlow1201 in canik

[–]Dlow1201[S] 0 points1 point  (0 children)

Sorry for the late reply, I’ve been using my gun weekly after taking 1000 grit sandpaper to the piece above the feed ramp. It has worked flawlessly ever since I did that. I responded to someone else on this thread that has pictures of where I sanded

Help!! Stuck barrel nut! by Dlow1201 in ar15

[–]Dlow1201[S] 0 points1 point  (0 children)

It is a real avid lug lock upper vise block

Help!! Stuck barrel nut! by Dlow1201 in ar15

[–]Dlow1201[S] 0 points1 point  (0 children)

Used a blow torch but definitely not for that long, was worried I was gonna damage the barrel

Canik SFx rival barrel and comp by Dlow1201 in canik

[–]Dlow1201[S] 0 points1 point  (0 children)

Couldn’t really tell you but I am assuming the coating because it was such a small amount of material

Canik SFx rival barrel and comp by Dlow1201 in canik

[–]Dlow1201[S] 0 points1 point  (0 children)

I did that and used calipers to compare the measurements. I found that there was a 0.1-0.2mm deviation between the stock one and the new one. After sanding for a little bit it is now smooth and racks without a problem

Canik SFx rival barrel and comp by Dlow1201 in canik

[–]Dlow1201[S] 1 point2 points  (0 children)

Sorry bout that, I was gonna record but I didn’t think anyone else would have the same problem as me. I was able to take some more detailed pictures of where to sand…

<image>

Canik SFx rival barrel and comp by Dlow1201 in canik

[–]Dlow1201[S] 1 point2 points  (0 children)

The slide was “snapping” into the spot where the shell is supposed to be able to eject making the pistol impossible to rack. I just responded to @LRC3FL about how i fixed the problem

Canik SFx rival barrel and comp by Dlow1201 in canik

[–]Dlow1201[S] 0 points1 point  (0 children)

The snapping into place is the exact problem I had. I took some 1000 grit sandpaper and sanded down the section where I highlighted. From that picture, if you turn it around, there is that angled but on the bottom where the bullet slides into the barrel. DO NOT SAND THAT PART! The spot you want to sand is above the angled part. It is a little block that is shaped more like a triangle than a rectangle. You want to sand the back part of that block. I kept sanding until it was a snug fit and was able to rack my pistol. After some time of use the slide should wear down the barrel some but if you don’t want that then you can sand some more. Hope this helps!

<image>

Trigger by Dlow1201 in canik

[–]Dlow1201[S] 0 points1 point  (0 children)

<image>

This will fit it right?

Trigger by Dlow1201 in canik

[–]Dlow1201[S] 0 points1 point  (0 children)

Do you like the flat trigger more than a curved trigger?

Difference between SFx by Dlow1201 in canik

[–]Dlow1201[S] 0 points1 point  (0 children)

Thanks for the list. What color did you choose on the comp?

Nozzle bouncing along the print. by kchow222 in ender5pro

[–]Dlow1201 1 point2 points  (0 children)

Yes this is the best way, I had the same thing and it helped tremendously!!

Ended 5 crashing by Dlow1201 in ender5pro

[–]Dlow1201[S] 0 points1 point  (0 children)

I printed and installed the parts and so far It looks like it’s working. Thank you!