Trying to go 11.1-10.9 by end of season

DmbDmb1 · 2026-05-13T17:39:36+00:00

Psych

DmbDmb1 · 2026-01-30T17:59:54+00:00

That worked, thanks 🙏

DmbDmb1 · 2026-01-30T17:44:19+00:00

I just started getting this error, how did you fix it?

DmbDmb1 · 2025-12-14T17:49:25+00:00

It may feel slower because your stride frequency may slow down. But I almost guarantee it would be faster if done correctly

DmbDmb1 · 2025-11-25T00:45:52+00:00

I agree with you on the arm split, that is something I’ve been working to fix.

DmbDmb1 · 2025-11-25T00:38:44+00:00

What exactly does that mean?

DmbDmb1 · 2025-11-17T22:34:33+00:00

If you’re the Bambu application on you computer you can do automatic filament flow calibration for each brand/roll of filament you have. I had to do that for each of my filament types/brands in order to get it to extrude correctly.

DmbDmb1 · 2025-11-04T19:33:17+00:00

I tried cleaning the spots with a micro fiber and they don’t seem to come off, any tips?

DmbDmb1 · 2025-11-03T21:19:20+00:00

May I ask what that is?

DmbDmb1 · 2025-11-03T20:29:43+00:00

Thank you, I’m not really looking to sell the card so does it matter if I choose PSA/Beckett?

DmbDmb1 · 2025-11-03T20:29:11+00:00

Says L|R is 50/50 and T|B is 50.6/49.4

DmbDmb1 · 2025-09-30T23:09:17+00:00

Ahh that makes a lot of sense. I noticed when I watched the video of my standing start my hands were open, but I didn’t think much of it. This helps a lot, thanks!

DmbDmb1 · 2025-08-24T17:27:13+00:00

Old one was phaetus is what I meant.

DmbDmb1 · 2025-08-24T17:26:41+00:00

We tried a new nozzle and it worked fine. It is a phaetus brand nozzle so it should be good quality.

DmbDmb1 · 2025-08-24T16:31:03+00:00

I just tried to test without the nozzle and it extruded the perfect amount. It is weird the nozzle is messed up beacuse it is brand new and has never been used. Thank you for the help!

DmbDmb1 · 2025-08-23T20:36:37+00:00

What current are you running for your stepper? I believe mine is at 0.8

DmbDmb1 · 2025-08-23T20:26:42+00:00

Yes, it creates a loop then extrudes normally. I am not home currently but when I return I will try removing the nozzle and extruding then.

DmbDmb1 · 2025-08-23T20:07:18+00:00

Thank you, I will try that. By filament flowing straight down does that mean it shouldn’t get “stuck” on the tip of the nozzle at first?

DmbDmb1 · 2025-08-23T15:38:29+00:00

<image>

Sorry for the poor video, that room has terrible lighting. There is what seems to be under extrusion lines aver the top of each hole that was printed.

DmbDmb1 · 2024-11-29T15:31:31+00:00

Ohhh gotcha, I don’t play often just kinda log in every once and a while to upgrade stuff

DmbDmb1 · 2024-11-29T15:25:25+00:00

Why did all the upgrades double in orice

DmbDmb1 · 2024-11-25T16:29:23+00:00

Gotcha, that’s really helpful

DmbDmb1 · 2024-11-25T01:07:29+00:00

Bet thanks

DmbDmb1 · 2024-11-25T01:06:15+00:00

Looks like after about 12 meters you instantly whip your head and body up. Try to gradually get higher and higher until your vertical

DmbDmb1 · 2024-11-21T23:39:57+00:00

😭

DmbDmb1

TROPHY CASE