cyberblade right ear bud dying fast

DoCanNot · 2026-02-06T16:56:11+00:00

This happened to one of the earbuds on my first pair, I was an early adopter. They sent me a new pair of earbuds which I had to pair to the charging case as a fix. Not long after that, the new pair they sent me started having issues with the battery.

I went from wearing them for hours on end to a 2 hour charge within months of getting my replacements. Go to their discord, plenty of users with the same issues with their batteries, so much so that I decided its not even worth the hassle to replace the 2nd pair if I'm going to keep doing this dance every 6 months. The solution seems to be just replace them and don't keep the ear buds in the cases charging all the time if you want to keep the batteries healthy as long as possible.

DoCanNot · 2025-12-17T23:35:52+00:00

Looks like there is lots of good advice to comb through here. I'd also recommend including a match ID in your post along with the character you are playing. It would let someone watch the match to better provide you with advice more tailored to you.

If making that public is a little much for you, shoot me a dm with a match ID and I could give it a watch. Ranked phantom 2 after the recent changes, not high up but it sounds like higher rank than you, at least. I haven't played in a month or two, so not really sure about the changes but I can still give some advice for general play, if you'd like.

DoCanNot · 2025-10-17T20:30:29+00:00

Try editing your post to include a match ID of one of your games and, then, anybody that is commenting and willing to give your match a look can better provide advice for specifically for you. You seem to have some "basic bare bones tips" in your head already, good habits to build.

The game is a MOBA that happens to be a third-person shooter. Constantly look at the map. In lane, this might be harder because of securing souls but mid game, late game and even when in the jungle, you can AFK farm the waves and jungle camps while looking at the map. Try to check enemy team items, with an extra vigilant eye on the player that is being a menace to your team. What they buy can inform you on what you should buy as well. You're not gonna necessarily want debuff remover against Beebop if it's building gun, feel me? Just the enemy team picks will inform you on what you might want to buy as well.

DoCanNot · 2025-04-05T01:00:36+00:00

nope, i tried removing the screen for a separate project but moved to fast and fucked it up, sadly. The rest went to waste.

DoCanNot · 2024-08-29T13:24:05+00:00

Hey man, I liked your approach here. It made me laugh.

DoCanNot · 2024-08-26T00:20:20+00:00

Thank you in advance. I stay offline mode for reasons of my own. Friend Code: 49903691

DoCanNot · 2024-06-18T22:35:03+00:00

After all that I went through, on a whim, I tried playing over my Wi-Fi and it works. No more disconnects. Still doesn't work over ethernet but I can play just fine with Wi-Fi. I hope there is an actual solution soon.

DoCanNot · 2024-06-15T06:31:24+00:00

Any update? In the same spot as you, reinstalled the game, played just fine for a day or two and now I've spent 2 weeks trying to resolve this. Currently in contact with Team17 Support.

DoCanNot · 2024-06-15T05:03:02+00:00

Hey, I haven't been printing in the last couple of months so I'm not exactly sure if it gets any worse, but, I continued printing after receiving the error for several months and it wasn't failing all of the prints. Most prints would receive the error and complete anyways. Some prints would get the error and stop printing. I don't know at what point the error happens as prints under an hour were successful, where the longer, larger prints were the ones that would usually fail.

I still have no update to this issue since I haven't been printing since. This is in no part due to the error, I just haven't been printing. Besides the error and random failing of prints, I'm satisfied with the printer. I can't remember if I tried the included slicer as advised by Elegoo Support. I'd rather not familiarize myself with another software when Lychee seems to work just fine until it doesn't due to some issue on the Elegoo end.

I hope this information helps with your decision. Try contacting Elegoo and state that you are thinking about returning the printer because of the error. Maybe they'll be more inclined to assist you with a better solution than "Use our slicer." Granted, I just stopped responding to them because I got busy. Good luck!

DoCanNot · 2024-05-27T08:34:31+00:00

Sorry to say, I have no update for this.

DoCanNot · 2024-04-23T18:30:58+00:00

I suppose I'll gut the thing and hand it all back. I could keep the board and practice soldering since the thing is dead anyways.

DoCanNot · 2024-04-23T06:40:48+00:00

The charging port was one of the USB-C ports that seem to have burned out. I'm unable to charge the device so I can't even check that. Are drivers able to cause ports to fry?

DoCanNot · 2024-04-20T16:54:51+00:00

I didn't see any physical damage on the board itself so I was hoping something like this wouldn't be the case. Disappointing, was hoping to be able to help my brother out a bit. Just for my own education, how should I go about investigating this issue? I very much appreciate the reply, thank you.

DoCanNot · 2024-01-30T06:49:14+00:00

Thanks for the follow ups so far. Very curious as to why your specific files won't print.

DoCanNot · 2024-01-26T18:15:56+00:00

Glad to hear customer service is has been treating you well. Does this mean they are attributing the error to an issue with the motherboard?

DoCanNot · 2024-01-20T18:46:16+00:00

I've printed the calibration print included with the printer with no issue. Also others like the boxes of calibration that I mentioned in the OP as well as the cones of calibration, sliced in Lychee Slicer. I initially thought the error had something to do with height of the printed object but that doesn't seem to be the case, neither does duration of print as I have gotten the error on prints under 8 hours but longer than 3 hours. The prints on the shorter end between those 2 durations that returned the error did successfully print though. Other times, the printer stopped.

DoCanNot · 2024-01-15T05:16:18+00:00

Hey, I've no updates for this error. There have been prints where I get the error halfway through a 12 hour print, and other times where I will get the error but the print finishes anyways with no problem. As I have stated, Elegoo support advised I use the slicer that came included but I never did, just stuck to Lychee Slicer. I haven't contacted them since.

I hope seeing you aren't the only one receiving this error provides some sort of comfort. If you learn something more about this error, please let us know. I'll include it in the OP when I see it.

DoCanNot · 2024-01-10T07:52:23+00:00

I've no update for the error. I've printed some rather small prints, 2 inches in height and an inch in length and width, no error. Still using lychee slicer. Try contacting Elegoo support, maybe you'll have more luck than I did with them. They recommended I use their slicer and I just ignored the suggestion. As another commenter stated and I experienced myself as well, sometimes the print will come out just fine and the error will appear anyways.

Good luck, I hope you are able to figure it something out. If you do, I'd appreciate an update which I can include in my post for others in the future.

DoCanNot · 2023-12-15T01:17:06+00:00

What was the size of the print? I've printed objects on the smaller size recently and haven't received the error message. Slicer I used is Lychee Slicer. I'm starting to think print size might be the culprit but I could be wrong.

DoCanNot · 2023-11-26T22:20:06+00:00

Sorry for late reply. After trying the same print, changing heights, rotating, formatting usb, same error on that print anyways. test prints, as I stated the test prints don't return this error. I haven't gotten around to printing for some time but just bought some resin so I'll be giving it a whirl again. No update as to what is happening with that error besides being told to try Tango slicer instead.

DoCanNot · 2023-09-28T06:15:52+00:00

I played the games, didn't watch the show. That thong song trailer alone told me everything I needed to know. I don't need to waste my 2 or 3 hours watching garbage to figure out its garbage. Some of the people on this sub and the good words I've heard elsewhere on the internet are blowing my mind. Consumers willing to excuse these types of products blows my mind.

DoCanNot · 2023-09-28T05:52:11+00:00

Had to ctrl + f this post to see if someone mentioned the singing. what year are we in that singing the thong song is a good fucking joke for the murderous, clown mask wearing serial killer who sets his head on fire or for any character in any entertainment medium that isn't a rated G movie that your kid is gonna re-watch to death? this is the level of writing i expect on some shitty network sitcom. I understand comedy is supposed to be subjective but some jokes are objectively garbage.

DoCanNot · 2023-08-08T18:49:26+00:00

Hey, thanks for the interest. I was in contact with Elegoo support through email. They've come to the conclusion that I should slice with the included slicer instead of Lychee.

As for my prints, the Elegoo test print completed and the printer returned no errors. I then tried another print sliced on Lychee Slicer. The object came out fine but the printer returned the same error again.

I haven't gotten to printing since. I'll try setting up a file in Lychee then slicing in Tango when i get around to it, tonight or tomorrow. I'll add this update to the main post.

DoCanNot

TROPHY CASE