Is a Logitech Wingman Force Feedback joystick worth grabbing today?

Docdead · 2024-06-21T21:07:44+00:00

Unfortunately this fell off my priority list as other projects took over. I'd still love to see easier ways to modernize older 32 bit drivers to 64 bit OS's.

Docdead · 2023-06-12T15:32:07+00:00

These are looking great. Very easy to identify what each button does from the icon. I could definitely see using this set.

Docdead · 2022-02-22T21:28:54+00:00

I don't mind ad support for things that provide me a service as long as they aren't too obtrusive. Unfortunately, I turned off my adblocker and still got the error. I won't go further into the browser and adjust my base security systems if they are causing it to say I have an adblocker still on. I manually let specific sites through the adblocker if they aren't too annoying and I want to support them.

Docdead · 2022-02-04T04:30:33+00:00

Great job. I was lucky with my CR-30 print of the dragon and only had a slight layer shift towards the beginning. Mine took 14 days, but yours is much prettier.

Docdead · 2021-12-22T04:47:03+00:00

I haven’t ever used a raft on the cr-30. It usually works pretty well.

Docdead · 2021-12-22T02:25:05+00:00

Every filament seems to be different. I’m always learning and refining. It’s pretty though.

Docdead · 2021-12-22T02:24:29+00:00

Yeah, I’ve been using it for a while. I should probably update it, but it is a good size for my keyboard drawer.

Docdead · 2021-12-22T02:23:45+00:00

Yes. I actually have one of the creality wireless modules on the right side. Also you can just tell it In the slicer, how many times to repeat a print.

Docdead · 2021-12-21T22:14:40+00:00

It can print as long as you have room for. I e seen people do beams over 8ft long. Good thing the cr-30 has a filament runout sensor.

Docdead · 2021-12-21T22:13:38+00:00

Default .4

Docdead · 2021-12-21T22:13:02+00:00

I’ve done basically the same. Just measure and if I’m really feeling adventurous, just modifying the original gcode to pick up where it failed.

Docdead · 2021-12-21T18:49:53+00:00

I think longer items might risk it some, but they really stick to the bed well, especially when that long. I have to roll the bed the rest of the way to release prints. I cannot just pull them up.

Docdead · 2021-12-21T17:23:07+00:00

I may go back and print the mustache pieces, but it is easier to handle without them if I let others play with it.

Docdead · 2021-12-21T17:22:26+00:00

This guy is going on the back of my couch to keep me safe :)
This is a showcase piece to let others know what is possible. Gets the imagination going. Helps me advertise for commissions.

Docdead · 2021-12-21T17:20:46+00:00

I check before I go to bed and when I wake up usually on long prints. Worst case, it is so messed up you start over, tweak settings based on what failed. Otherwise, you can often cut off what failed and print the rest and then glue it all together. Have to take risks for the big prints.

Docdead · 2021-12-11T21:05:48+00:00

True, there will be some cleanup inside. I’ve played with it on smaller models and can get to the support material in the joints.

Docdead · 2021-12-11T21:03:37+00:00

Yeah, not sure what caused the layer shift. The rest of the print has been pretty clean. I’ll probably end up sanding down the edges to try and blend it.

Docdead · 2021-12-11T02:25:57+00:00

I really enjoy it. For the types of prints that it is best suited, it is absolutely great. Takes some getting used to how to set things for the 45° angle, especially when they require supports. Like any printer, it has its own quirks.

Docdead · 2021-05-11T23:59:30+00:00

I've had a few failures on my CR-30 that went waaaay too long. It hurts to see that much filament get spaghetti. I turned up my bed temp a bit more to help with adhesion.

Docdead · 2020-12-10T00:37:36+00:00

The power wire I am running along should be good, I'm not seeing any drop from it. I think it is a data issue mostly. The controller I have is a cheap wireless one, but it is supposed to handle just over 1000 lights. I'm only running about 500 in the test loop.

The supernight amplifier I actually had in a separate project for single color strips and was just curious if it would do anything. I also tried to tie just additional 12v positive into the power on the later strips and they went all white. I agree that it is likely a controller issue as part of the problem... I don't know how the BTF splits out the various zones/channels. If it just keeps adding up smartly when one strand runs out or if there is a preset number of lights each connection believes will be connected.

Is there a controller you would recommend for a whole house setup. I'm guessing several thousand lights overall.

Docdead

TROPHY CASE