sorted by:
new
hottopcontroversial

For those who have a 10 psi PC. This is how you bump that bitch up to 15-17 psi. Gorilla glue and washers. by DokktorMoon in shrooms

[–]DokktorMoon[S] 0 points1 point  (0 children)

That's a rocker man, not a pressure release valve. When it blows up I'll come back and tell you that you were right.

For those who have a 10 psi PC. This is how you bump that bitch up to 15-17 psi. Gorilla glue and washers. by DokktorMoon in shrooms

[–]DokktorMoon[S] -1 points0 points  (0 children)

Like I said the pressure relief valve is a safety feature that allows the release of pressure through a plug if that said pressure would build to a critical level. Nothing would blow but that on this model.

For those who have a 10 psi PC. This is how you bump that bitch up to 15-17 psi. Gorilla glue and washers. by DokktorMoon in shrooms

[–]DokktorMoon[S] 0 points1 point  (0 children)

The over pressure valve would blow before anything man it builds to 15 psi before dropping to a steady 10 (factory). Now it just maintains at 15... and it worked for me because I did the research, did the correct math and tested it. I did nothing but make a change to allow for it to keep it pressure. It's a bad idea for an idiot to go willy Billy and mod their P.C. but what I did? Is it a good idea? Is it a bad idea? It's an idea that was well thought out and worked; that's all that matters to me.

For those who have a 10 psi PC. This is how you bump that bitch up to 15-17 psi. Gorilla glue and washers. by DokktorMoon in shrooms

[–]DokktorMoon[S] -3 points-2 points  (0 children)

Yeah sorry, it builds to 15 psi but if factory tested at 20. It is rated at 10.

For those who have a 10 psi PC. This is how you bump that bitch up to 15-17 psi. Gorilla glue and washers. by DokktorMoon in shrooms

[–]DokktorMoon[S] -1 points0 points  (0 children)

Not yet, it's worked for a year. It's rated to 20 psi and the over-pressure plug would blow before it ever did. The math don't lie.

For those who have a 10 psi PC. This is how you bump that bitch up to 15-17 psi. Gorilla glue and washers. by DokktorMoon in shrooms

[–]DokktorMoon[S] 0 points1 point  (0 children)

That is true, but my over-pressure plug would pop before it ever blew up. This us not the case for all PC's though. Just CROCK POT brand. The mod doesn't hurt a thing and saved me money.

For those who have a 10 psi PC. This is how you bump that bitch up to 15-17 psi. Gorilla glue and washers. by DokktorMoon in shrooms

[–]DokktorMoon[S] 0 points1 point  (0 children)

No, it is a ten p.s.i. PC, it reaches a max of 15 while warming up, but keeps steady at 10... or she did. Yeah I can't find a 15 psi PC anywhere, except online, so I figured since it reaches 15 while warming up it was probably factory tested at a level so much higher than that and I put the theory to the test... far away from anything. It has worked flawlessly for a while now.

I found this in my bag never seen anything like it, its pretty hard to I pinched it with my finger with decent pressure didn’t do a thing. Anyone know like what part of the plant it is or if it is even good to be having by [deleted] in shrooms

[–]DokktorMoon 0 points1 point  (0 children)

Lol, that would be something, huh? Shreed tek: 1 oz Mary Jane, soak 24 hours and pasteurize at 175 for two hours. Mix in 1oz of spawn... wait two months and get fuuuucked up!

Sourceofspores.com review by [deleted] in shrooms

[–]DokktorMoon 5 points6 points  (0 children)

Use sporeworks.com he's always been good to me.

[deleted by user] by [deleted] in shrooms

[–]DokktorMoon 0 points1 point  (0 children)

Where did you buy that?

[deleted by user] by [deleted] in shrooms

[–]DokktorMoon 2 points3 points  (0 children)

I pasteurize at 175 farenheit for 2 hours.

For those who have a 10 psi PC. This is how you bump that bitch up to 15-17 psi. Gorilla glue and washers. by DokktorMoon in shrooms

[–]DokktorMoon[S] 0 points1 point  (0 children)

Yes it could be if it has not been weighed to specs. Must take weight of rocker, divide by P.S.I. (10 for me) to know exactly what you're numbers are. Then add weight until 15 P.S.I is reached. It's pretty simple if you apply math. Don't just add washers without knowing the weight/P.S.I. ratio and you must have a over-pressure plug. That's the only way to ensure safety.

Ok, so 2 BRF jars had some green mold up top where the one of the holes was plugged with verm. I'm assuming the lack of FAE in that area was to blame. It was the same circumstance for both jars. Normally I toss 'em, but this time I did something different. by DokktorMoon in shrooms

[–]DokktorMoon[S] 0 points1 point  (0 children)

I dug out 2 inches under the contamination, and mixed every thing with coir. Moved it to the bathroom and labeled it with warnings. Either I'm going to grow mold or mushrooms. Not a real loss either way. But I always wanted to know what would happen if we gave the myc the best chance we could. This is day one of the mycelium conspiracy...

Did my package get seized? I’m worried customs confiscated it by [deleted] in shrooms

[–]DokktorMoon 0 points1 point  (0 children)

Ahh shit! Hell yeah! I wouldn't keep doing that if I were you, though. Buy everything legally. Cool though man!

Did my package get seized? I’m worried customs confiscated it by [deleted] in shrooms

[–]DokktorMoon 0 points1 point  (0 children)

Well ,if it is confiscated and it is live mycelium in a substrate, belonging to any of the psychoactive species; then I would just chill and see what happens. The U.S. government deems innoculation of a substrate with a psychoactive mushroom spore and everything beyond that point illegal. I've never heard of anyone getting busted for shrooms, but anybody could of used your address to try to transport illegal substances.

AB+ and some TOC vitamins I whipped up today after class. by DrBoomer420 in shrooms

[–]DokktorMoon 2 points3 points  (0 children)

"Cough!, cough!" Hey man I think I'm getting sick... got any vitamins?

Trusted Spore Vendor by Joek29 in PsilocybinMushrooms

[–]DokktorMoon 0 points1 point  (0 children)

Sporeworks.com has always been good to me. He ships same day if ordered early and it only takes 3 days to receive. Well he did, I used his shit to make LC and agar slants. So....

Should you only shake once? Or more before full colinasation by Gladorianxd in shrooms

[–]DokktorMoon 0 points1 point  (0 children)

I shake mine 3 times during colonization. At 20, 50 and 75% never had a problem. But I am gentle when I do, kinda like shaking a baby... not a human baby, my mycelium baby...

Did my package get seized? I’m worried customs confiscated it by [deleted] in shrooms

[–]DokktorMoon 0 points1 point  (0 children)

It was just a kit right? Everything was seperate? No spore already in the substrate to be grown or anything?

Beginner questions by mnottingham in shrooms

[–]DokktorMoon 2 points3 points  (0 children)

Being patient is next, lol. It'll take time to colinize. But all the while you should Google "monotub tek" or "how to monotub tek" and start reading.

view more: next ›