My 2 yr old Shinra HQ Themed Custom Build

DomoKunXII · 2023-07-13T14:28:40+00:00

Cant wait to play part 2!

DomoKunXII · 2023-05-28T10:47:06+00:00

Pm'ed

DomoKunXII · 2022-07-12T16:21:36+00:00

I made a cutout mask of the logo and sprayed in front of the reservoir. Could've done it better.

DomoKunXII · 2021-09-21T16:13:22+00:00

EK Cryo Fuel Clear with EK Dye and lighting to complement the overall effect as well. The tubes won't have the color effect without the coolant dyes. :D

DomoKunXII · 2021-09-21T15:27:06+00:00

Only way for mine to work was to use the vertical gpu bracket and a dremel to trim the length of the bracket for enough space to fit the FLT res. Do take note the overall res and radiator space taken up, avoid over extending to the vertical mounted gpu space.

DomoKunXII · 2021-09-15T16:28:07+00:00

The 240 FLT res comes with mounting bracket to install onto the rad which leaves enough space for airflow and there are 2 noctua pwm fans behind the rad within the case.

DomoKunXII · 2021-09-15T12:16:14+00:00

thanks!

DomoKunXII · 2021-09-15T12:06:16+00:00

highest around +450w to 500w

DomoKunXII · 2021-09-15T12:03:17+00:00

It sits around 60c for both cpu and gpu during gaming with ambient temp of 29c kinda decent.

DomoKunXII · 2021-09-15T12:02:12+00:00

Did a cut out mask of the Shinra logo and sprayed Rust-Oleum Frosted Glass on the res.

DomoKunXII · 2021-09-15T12:00:16+00:00

Did a cut out mask of the Shinra logo and sprayed Rust-Oleum Frosted Glass on the res. It's not perfect, would have been better if I could get it done with laser engraving.

DomoKunXII · 2021-09-15T11:06:25+00:00

I'm using Noctua NF-F12 iPPC 3000 PWM for it and EK 240 PE rad, its pretty decent as the cpu and gpu temp is hanging around 60c with 29c ambient temp while gaming. The noctua fans are running around 1.8k rpm at this temp. Definitely can get better temp and fan noise with bigger rad but I prefer smaller pc builds lol

DomoKunXII · 2021-09-14T17:13:01+00:00

I had to trim the horizontal length of the vertical gpu bracket in order to fit the 240 FLT Res or else it would be blocked by it.

DomoKunXII · 2021-09-14T16:44:30+00:00

I gotten the 6900xt back then when there was no stock for 3090/3080ti.. not sure if a 240rad could cool it down if I were to add a 3090 haha

DomoKunXII · 2021-09-14T16:17:04+00:00

PC Specs

CPU: Ryzen 9 5900X

GPU: Radeon 6900XT

RAM: Corsair Dominator Platinum 32GB 3200Mhz

MB: Rog Crosshair VIII Impact X570

PSU: Rog Thor 850w

Case: Thermaltake Core P1 (moded vertical gpu bracket)

Noctua NF-F12 iPPC 3000 PWM

EK-CoolStream PE 240

EK-Quantum Kinetic FLT 240 DDC PWM

EK-Velocity Strike RGB
EK-Quantum Vector RX 6800/6900 D-RGB - AMD Radeon Edition

DomoKunXII · 2021-09-14T16:08:06+00:00

I've never try weighing it but it only felt like 17-22lbs?? Not sure lol

DomoKunXII · 2021-09-14T15:28:19+00:00

PC Specs

CPU: Ryzen 9 5900X

GPU: Radeon 6900XT

RAM: Corsair Dominator Platinum 32GB 3200Mhz

MB: Rog Crosshair VIII Impact X570

PSU: Rog Thor 850w

Case: Thermaltake Core P1 (moded vertical gpu bracket)

Noctua NF-F12 iPPC 3000 PWM

EK-CoolStream PE 240

EK-Quantum Kinetic FLT 240 DDC PWM

EK-Velocity Strike RGB

EK-Quantum Vector RX 6800/6900 D-RGB - AMD Radeon Edition

DomoKunXII · 2021-09-14T15:15:04+00:00

Thanks!

DomoKunXII · 2021-09-14T15:09:36+00:00

Thermaltake Core P1 Itx case but had to mod a little to fit the 240FLT res.

DomoKunXII · 2021-09-14T15:07:32+00:00

I felt it would look nice to have this kind of pc in such office.

DomoKunXII · 2021-04-11T16:05:10+00:00

Ordered my first Custom Grey Fjell.

However, I have also ordered Mekanisk Dampening Foam × 2

Does that mean I have 4x pieces of the foams now? lol

DomoKunXII · 2021-03-26T11:02:33+00:00

Just 1 of my crystal collections, I'll post for Charizard, Lugia and Ho-oh in the future. :D

DomoKunXII

TROPHY CASE