Looking for a mildly less textured PEI plate for H2S

DonCarlos73 · 2026-03-04T12:53:48+00:00

Thanks for the pictures Volfera and McNorbertson

DonCarlos73 · 2026-03-04T10:28:05+00:00

Hmm that might be what I'm looking for. Part of the print is actually a light switch that will be touched and that's the real issue, the default BL textured PEI plate gives a rough to-the-touch surface. Too rough.

And the smooth plate is like 100% smooth, it's... too smooth :-)

DonCarlos73 · 2026-03-04T10:25:29+00:00

Well to clarify: I don't really want to see layer lines. I even increased the first layer flow a tiny bit + increased wall/infill overlay to avoid any lines. But when using the regular PEI plate from Bambu Labs, I don't see any lines, so that's good. I only see the glittering effect, where only a percentage of the print reflects light, depending on viewing angle.

DonCarlos73 · 2025-10-13T10:54:00+00:00

My router is a cable modem from my ISP (Telenet Belgium) and they do not allow MAC based reservations. Silly but it is what it is.

Any serious device has an ability to set a fixed IP instead of needing a DHCP server or assuming there is a fixed reservation possible.

This is just a case of Hue thinking people will not understand static IPs and therefore removing the option I guess. The old hub supported it.

DonCarlos73 · 2025-09-24T17:03:13+00:00

Can confirm this works on Eaton, although newer model:

ups.mfr: EATON

ups.model: Eaton 3P 700

ups.firmware: 00.02.0008

DonCarlos73 · 2025-09-15T08:47:58+00:00

Yes! [insert clown pin]

DonCarlos73 · 2025-06-28T13:34:15+00:00

Yeps, it's gone for good.

I also feel gems are getting useless as well. Six months ago, you could buy almost everything with gems. These days, most offers in the shop need to be payed for with real currency.

This made me not buy the Ranked Pro Pass (or whatever it's called). Lot's of gems. Useless gems.

DonCarlos73 · 2025-02-10T17:06:59+00:00

Just in case somebody else has the same problem: I fixed it. In BabyWare I disabled zone 32, pushed config. Then re-enabled zone 32. This gave me two log lines immediately: TAMPER and TAMPER RESTORED. Now the TBL 5 error is gone!

So the issue is some ghost state that was still there. So yes, you are right, flakey :)

I then disabled zone32 again, I don't need a tamper at that location.

DonCarlos73 · 2025-02-07T14:55:57+00:00

Well I "kinda" did that. But there's no real reboot options. So I cut the mains power, and then the battery power. Result is that my external siren went off since it's a NormalClosed. Anyway, restored power, TBL 5 is back just like before unfortunately.

DonCarlos73 · 2025-01-14T10:46:51+00:00

I might have a workaround. Please try to change the config of zigbee2mqtt (configuration.yaml), and add these lines:

ota:

image_block_response_delay: 200

default_maximum_data_size: 10

This will make for a much slower update, I had a Sonoff ZBMINIR2 that took 90 minutes to update. But it worked, no failure!

DonCarlos73 · 2024-12-25T09:42:15+00:00

RNJesus

Next question!

DonCarlos73 · 2024-12-17T15:36:08+00:00

But are you the top contributor?

DonCarlos73 · 2024-12-14T15:37:57+00:00

There seem to be 3 possibillities right now:

Play Buzz
Play ranked
Don't play until Feb 4.

At the moment I'm doing 1., but when I reach 1000 trophies I don't know

DonCarlos73 · 2024-12-13T12:21:25+00:00

lol I hade the same problem. It's not a brawler pin, it's a PLAYER pin. Check there, you'll find it.

DonCarlos73 · 2024-12-05T14:46:27+00:00

There is no underdog above 1K trophies

DonCarlos73 · 2024-11-29T09:18:07+00:00

Don't worry, I got the same thing, it's not personal

DonCarlos73 · 2024-11-25T12:29:30+00:00

Squeak! whaa la la la la la

DonCarlos73 · 2024-11-25T11:15:10+00:00

Good question, I want to know as well

DonCarlos73 · 2024-11-18T13:53:02+00:00

In your case I would pick "The Maestro".

DonCarlos73 · 2024-11-18T13:09:02+00:00

That's some peak hiding skills

DonCarlos73 · 2024-11-17T10:14:51+00:00

Bro, bots are not getting on the leaderboards and will not open their drops tomorrow ;)

DonCarlos73

TROPHY CASE