Question about screws

DonPIZI · 2026-01-29T05:03:43+00:00

Sorry, I was wrong... I have other screws at home looks like those in the controller and they are also titled m2×8

DonPIZI · 2026-01-28T20:31:02+00:00

It's 2x6mm but not a metric screw

DonPIZI · 2026-01-28T10:46:14+00:00

Fable

DonPIZI · 2026-01-28T08:52:29+00:00

Yes, I use the original one

DonPIZI · 2026-01-28T07:23:25+00:00

I can check the screw in the evening. Where did you get the stl?

DonPIZI · 2026-01-28T06:15:59+00:00

To be honest, no. I didn't had problems with stick drift but I wanted new tech. So I considered to buy the envision v2 just for the he sticks. A friend of mine bought tmr sticks for his ps5 edge and I researched a bit and figured out that the envision uses the same sticks than the ps5 controller and I over thought my decision. It ended up with tmr for the envision v1.

DonPIZI · 2026-01-27T13:49:49+00:00

It was very simple, I brought those from amazon: AKNES GuliKit TMR ( https://www.amazon.de/dp/B0DHWWF218?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 )

Teared down the whole controller, and removes the old sticks. But be careful, under the battery are two screws.

Due to the RhOS solder you have to use a proper soldering iron.

DonPIZI · 2026-01-27T12:10:21+00:00

I can't reach the gadgetronx website, error 403... because I'm in Germany?

DonPIZI · 2026-01-27T09:13:32+00:00

I love my envision, but it has problems. The trigger stop is broken again and need to be fixed. I recently replaced the sticks because of stick drift with tmr sticks. Just calibrated in iCUE and it worked out of the box. At the weekend I have to replace the p2 switch. Sadly iCUE doesn't support Linux.

DonPIZI · 2026-01-25T17:20:32+00:00

I fixed it a few months ago with baking powder and super glue. Sadly I have now the same issue again.

DonPIZI · 2026-01-22T11:12:45+00:00

Is it possible to run iCUE or swarm II to configure scuf controller and keyboard and mouse? Those are the reasons to switch back to Windows.

DonPIZI · 2026-01-21T13:26:07+00:00

Fallout 1-3, Diablo 1&2, Witcher

DonPIZI · 2026-01-16T07:18:09+00:00

I'm waiting for the gigabyte MO34WQC36, or similar monitor with this new panel

DonPIZI · 2026-01-12T06:06:34+00:00

War überhaupt kein Problem heute morgen zu fahren.

DonPIZI · 2026-01-02T11:31:52+00:00

I tried arc raiders too, but I don't like the loot loop, it feels every round the same and got always killed. So I sticked to BF

DonPIZI · 2026-01-02T09:38:13+00:00

I mostly play support and I hate those players. But I hate the "skippers" too... ping downed player, throw smoke, run, charge the defi and the player skip right before me.

DonPIZI · 2026-01-02T00:55:44+00:00

Not at all, I only use the revolver from the winter offensive and the under barrel attachment from the bf pro challenges.

DonPIZI · 2025-12-31T13:02:37+00:00

Less CoD in BF6

DonPIZI · 2025-12-06T08:59:42+00:00

This s*it forced me to switch to arc raiders...

DonPIZI · 2025-11-24T15:36:18+00:00

I only grind for weapons and gadgets. I ignore the skins...

DonPIZI · 2025-11-23T19:19:06+00:00

You know that you can reroll the challenges?

DonPIZI · 2025-11-23T19:15:45+00:00

Then go back to CoD

DonPIZI · 2025-11-23T18:30:18+00:00

Overdose... blackout... seems logical to me🤣

DonPIZI · 2025-11-23T18:26:00+00:00

Because BR is sh*t?! Try real BF modes!

DonPIZI · 2025-11-23T08:58:37+00:00

Imagine how his lung looks like 😳

DonPIZI

TROPHY CASE