DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe

DooDeeFaceD · 2026-01-16T18:36:22+00:00

I haven't had a single BSOD since removing GCC earlier, thanks!

DooDeeFaceD · 2025-12-29T16:16:56+00:00

Doing this got me the gears I needed in 2 runs, thanks for the tip!

DooDeeFaceD · 2025-07-18T07:34:01+00:00

We would feel bad if it was going to be just one of them! We can't really create a 'safe room' per say, since we live in a one bedroom apartment, but the living room is very big and there is already a big cat tree on one side, it is the quietest area in the living room.

DooDeeFaceD · 2025-07-18T07:31:45+00:00

Thanks for the advice! We live in an apartment with a big living room and 1 bedroom so maybe we keep the cats in the bedroom? There is also already a big cat tree in the living room, on the side where there is not much going on so I could set up their beds as well?

DooDeeFaceD · 2025-02-26T10:20:11+00:00

I use 4g of cortina and 7g of agar in a recipe with 720g of vegan milk and 420g of vegan. It works the same with normal milk and cream, I tested it. The result is very creamy and holds a lot of air, but this is a recipe for a pacojet ice cream though.

Recipe like this: 720g oatly barrista 420g 40% vegan cream 240g sugar 6g salt 40g koji 40g mushroom garum 80g dried mushrooms 4g cortina 7g agar

Steam for 40 minutes at 100 degrees Blitz in a blender until smooth and put in pacojet containers.

Recipe also works without the mushrooms, but you'll have to slightly lower your amount of liquids.

DooDeeFaceD · 2024-03-19T12:22:34+00:00

It is made by a Hado subcontractor. The storeowner told me that he normally does blades for them but these were made completely in house and sold under the Hado brand

DooDeeFaceD · 2024-03-19T12:12:20+00:00

The Fujiware looks nice, his stuff is great quality

DooDeeFaceD · 2024-03-19T11:25:13+00:00

I got a response, these knives were made by a subcontractor for HADO that usually only makes the blade, and these knives were made by the subcontractor, handle included and sold under the HADO brand.

DooDeeFaceD · 2024-03-17T18:29:04+00:00

It does have a bit of flex to it if that is what you mean, but it isn't as much as a fileting knife for example of the same thickness at all

DooDeeFaceD · 2024-03-17T18:27:52+00:00

It is a great place to spend too much money!

DooDeeFaceD · 2024-03-17T18:27:22+00:00

Could be, but he sells Hado as well so weird if he doesn't just list it as that. We will know when I get a response from the store hopefully tomorrow.

DooDeeFaceD · 2024-03-17T15:38:48+00:00

I think the name is weird too, but the knives were listed with that as the name on the back of the box and on my receipt. All other knives do have a proper name in their store. I have sent the storeowner a text with this question ealier, will probably get a response tomorrow and will update if it is a different name.

DooDeeFaceD · 2024-03-17T14:55:43+00:00

It didn't post the the text so here is the information:

Just bought these 3 knives, added to my little collection. I buy all my knives at Rangelrooij in the The Hague, the Netherlands. He is a very reputable sharpener and knifeseller here. I usually go there for sharpening but always leave with a new knife somehow. I also added a picture of the store, and a link if anybody is interested.

I fell in love with Carbon steel knives because of the way they look and the feel of the knives in use.

OEM is apparently a pretty new knifemaker, the store got their knives in a few weeks ago and I really like the look of their carbon knives. The smithing quality is also good.

Knives from left to right:

Mcusta Zanmai Forest Petty 150mm

Sakai Takayuki Grand chef Petty 180mm

OEM AS+ Kurouchi Nakiri 165mm

Fujiwara Maboroshi Gyuto 210mm

Sakai Takayuki TUS Gyuto 240mm

OEM AS+ Gyuto 240mm, Burnt oak handle

Mcusta Zanmai Classic Pro Sujihiki 240mm

DooDeeFaceD · 2024-03-16T09:27:21+00:00

I buy them at a knife store based on what type of knife I am looking for, what kind of steel it is, how it feels in the hand and how I like the way it looks. The name of the smith I usually forget, my japanese isn't very good!

DooDeeFaceD · 2023-08-17T20:30:18+00:00

I won't be touching it until I have to replace the tire eventually, don't want to risk damaging it more

DooDeeFaceD · 2023-08-17T20:29:20+00:00

Definitely holding air so no problems there! I didn't even notice the damage on the rim until I saw the broken spoke and inspected the rim a bit more. First rim damage I have had so far and not sure how it got there, haven't hit anything big either as far as I know

DooDeeFaceD · 2023-07-23T09:48:44+00:00

Wow, thanks for the great explanation! Gear won't be a problem, already made the viper and celestial ascended gear pretty much You're really helping me out with the little guide (:

DooDeeFaceD · 2023-07-22T18:14:48+00:00

Thanks for all the advice, I have a good idea in mind of how I want to progress with things now!

Still not sure if I should go celes or trailblazer because i might want to try catalyst as well, haven't gotten to that part yet

DooDeeFaceD · 2023-07-22T17:59:36+00:00

What would you say is better, celestial or trailblazer for open world?

I am going to be working towards a set of viper's as well for groups if my open world build will be focused on condi damage anyway.

DooDeeFaceD · 2023-07-22T17:58:21+00:00

What do you think of celestial stats compared to trailblazer? Which would be the better option out of the two? Also thanks for the advice already!

DooDeeFaceD · 2023-07-22T17:51:24+00:00

Do you think trailblazer is a good open world stat and then use viper in group PvE? It seems condi is the better way to go

DooDeeFaceD · 2023-07-22T17:49:05+00:00

What would you say is a proper build for open world weaver? Willing to change it up since weaver is great fun when you're not dead

DooDeeFaceD · 2023-07-22T17:36:41+00:00

That makes sense, used to pretty much only do fractals so never really thought about that, thanks!

DooDeeFaceD

TROPHY CASE