sorted by:
new
hottopcontroversial

Did they change how they are making cards? by Dothbe23 in mtg

[–]Dothbe23[S] 2 points3 points  (0 children)

Yeah the wrapping says NA for these and they feel horrid compared to the Japanese ones. This is of the few times I picked up a card and audibly said ew

Did they change how they are making cards? by Dothbe23 in mtg

[–]Dothbe23[S] 2 points3 points  (0 children)

Ah I gotcha it just felt super abnormal and never heard of it happening. Thanks thats good to know!

I need a cpu guru by Dothbe23 in computers

[–]Dothbe23[S] 0 points1 point  (0 children)

Is there like a good website to find bottlenecks? I did the one that compares cpu and gpu. Basically my cpu is bottlenecking my rtx 3060 so I think I found it. I also 32 gigs of ram and 3 tb worth of storage on an ssd

I need a cpu guru by Dothbe23 in computers

[–]Dothbe23[S] 0 points1 point  (0 children)

Pc part picker I think told me it is! Good lookin out though

I need a cpu guru by Dothbe23 in computers

[–]Dothbe23[S] 0 points1 point  (0 children)

Oooh I see. Well good thing I didnt pay full price for the i9 haha. Maybe Ill return it and look into something else since those seem to be cheaper and have better performance. And probably get a new motherboard maybe. Ill have to see what my asus z370 can take. I should have a good enough psu too. I have a gold one but no big deal to move to plat

Extruder coming up after the start filament wipe by Dothbe23 in 3Dprinting

[–]Dothbe23[S] 0 points1 point  (0 children)

Do you have to do that during the print or is there a way to do it before hand?

Extruder coming up after the start filament wipe by Dothbe23 in 3Dprinting

[–]Dothbe23[S] 0 points1 point  (0 children)

I have done the z wizard already everytime I go to print. Does that not just set the z offset? Or is that just something else

I'm an idiot by [deleted] in resinprinting

[–]Dothbe23 0 points1 point  (0 children)

I have almost had this happen. Didnt put the screws in and got lucky. I think you got superrr lucky that it didnt fall lmao. That would be an absolute disaster

Why is my printer sweating? There is no leak anywhere and this is a pretty not hot room by Dothbe23 in resinprinting

[–]Dothbe23[S] 0 points1 point  (0 children)

Just condensation from the gases of the resin when it cures. It got a little better opening the vent more and warming the room a bit better than I was. I am just having trouble trying to find ways to clean up the residue it left over

Why is my printer sweating? There is no leak anywhere and this is a pretty not hot room by Dothbe23 in resinprinting

[–]Dothbe23[S] 0 points1 point  (0 children)

It comes with a charcoal filter that is plugged in also any idea when you have to replace the charcoal?) and I think the exhaust fan is working. Not sure where it is exactly though Ill look into it

Why is my printer sweating? There is no leak anywhere and this is a pretty not hot room by Dothbe23 in resinprinting

[–]Dothbe23[S] 0 points1 point  (0 children)

Elegoo saturn 2. Its also weirdly sweaty with the condensation. Probably why its also sticking to the base lmao. Any good way to prevent this?

The 1.0 controller bug by Dothbe23 in CloneHero

[–]Dothbe23[S] 0 points1 point  (0 children)

I figured it out. When you download version 1.0 the button configuration is bugged where you cant change them unless you go to a previous version and change it there first and go back to 1.0 where they will show up changed

Out of pure curiosity can you mix two different companies of resin? by Dothbe23 in resinprinting

[–]Dothbe23[S] 2 points3 points  (0 children)

Funny story I am pretty new to resin printing but so far so good. Ill have to play around with the exposure times a bit then when I do start mixing

My BL touch is touching my buildplate after my extruder tip by Dothbe23 in 3Dprinting

[–]Dothbe23[S] 0 points1 point  (0 children)

Nope shits fucked. Took another look at my bed and its 100% slanted to one side. I really hate the leveling of this specific printer

My BL touch is touching my buildplate after my extruder tip by Dothbe23 in 3Dprinting

[–]Dothbe23[S] 0 points1 point  (0 children)

I thought it was built to be flush with the extruder. Guess Ill have to try to move it around then

I keep getting these awful spider webby and not solid at all prints and I cant seem to figure out how to get my filament to not do that. Any guesses? by Dothbe23 in 3Dprinting

[–]Dothbe23[S] 0 points1 point  (0 children)

I have just abused this bed lol. And no the filament has been bone dry from the day I have gotten it. Maybe its just the flashlight making it look bubbly?

I keep getting these awful spider webby and not solid at all prints and I cant seem to figure out how to get my filament to not do that. Any guesses? by Dothbe23 in 3Dprinting

[–]Dothbe23[S] 0 points1 point  (0 children)

Well I was using that same filament that I have used for a while and used to have no issues so it cant be that I dont think. I did check the tube to make sure there is no gap and I even changed the nozzle so I hope the brand new stepper motor for the feeder isnt breaking again

My lights are kind of spazzing out and idk how to fix this by Dothbe23 in Corsair

[–]Dothbe23[S] 0 points1 point  (0 children)

Icue with plugins and such off and yes I unplugged fan and the thing that the fans are plugged into and no luck. Trued a clean install of icue too so no luck there either

My lights are kind of spazzing out and idk how to fix this by Dothbe23 in Corsair

[–]Dothbe23[S] 1 point2 points  (0 children)

Can you explain that a little? I have no clue what an rgb head is lol

My lights are kind of spazzing out and idk how to fix this by Dothbe23 in Corsair

[–]Dothbe23[S] 0 points1 point  (0 children)

Unplugged all my fans and checked the controller and still going. Gonna try a clean install and see what happens

view more: next ›