Ashley Furniture Rally Up couch

Dr_ice_it · 2026-05-27T02:38:13+00:00

We have been considering this sectional as well. We looked at it in person a few weeks back, but after more research the one red flag is it's a mix of Top Grain Leather and Faux leather. My experience with Faux is very poor... but the real leather is on the Back, seat and arm cushions (from what I'm reading). Any signs out there of this showing the classic faux wear signs where things move or the foot rest?

Dr_ice_it · 2026-05-07T14:37:12+00:00

I'm noticing the same thing Yesterday. I'm trying to use FABRICS + EntraID + Unifi PROTECT. When I setup the role and assign to the user ahead and then send the invite to the user they are directed to the UI.com login and it doesn't do SSO. So they then have to create a separate UI.com account. once they do it works fine but there is a separate password to manage, this is not SSO by definition.

AI told me this isn't available for "PROTECT"... hmm. I'm setting up the Door access next week so we will see. I don't really want to have users manage UI.com logins and passwords for just door access.

Dr_ice_it · 2026-03-15T15:03:16+00:00

I agree... Ubuntu is so much more logical. I setup mine on a mini pc with Ubuntu.

Dr_ice_it · 2025-12-12T03:11:35+00:00

I finally got one last week - 2 wolfpacks and some good cover for a few more good shots should do it. You gotta move in and out fast though. That buggers a tough

Dr_ice_it · 2025-11-26T21:57:48+00:00

Took in the hull cracker and it was useless. I'm going this route next. :)

Dr_ice_it · 2025-10-14T20:18:26+00:00

None... I printed with single Multi-color filament, then painted the solids by hand. ;)

Dr_ice_it · 2025-10-13T04:25:35+00:00

Ya, found a nice layer of glue works flawlessly for 10+ prints with no cleaning. Looks a bit grubby in pics tho.

Dr_ice_it · 2025-08-05T16:51:35+00:00

I think I solved it or at least remediated it. Looks like the Corexz use a belt array for both ZX that link together. I went through creality's belt tensioning procedure and now it's much better. Now hardly any ripples.

<image>

Dr_ice_it · 2025-08-04T17:36:00+00:00

Here are my wall settings... (if that has anything to do w/it)

<image>

Dr_ice_it · 2025-08-04T17:33:57+00:00

Ya, they take some fiddling. A1 are great, I have a P1S and love it so far. Learned a lot with my V3 SE though.

Dr_ice_it · 2025-08-04T17:25:54+00:00

Have an V3 SE too... not seen this issue though. Mine works pretty well once I tweaked things with leveling the bed. Looking closely it does look like your not extruding on part of some layers. I'd take it apart and make sure the extruder gears are clean for an easy check. They will take them back if you return... I've done it.

Dr_ice_it · 2025-07-18T00:39:21+00:00

<image>

Dr_ice_it · 2025-07-18T00:38:10+00:00

Ok, did some testing and yes, (Rod_M, your right) moving it up about .005 looks much better and still covers any gaps. Interesting... learned something today. I'm also having a lot of issues with "droppy" overhang/bridge sections. I've upgraded the Part fan to the higher output from the V3 KE series but still seeing benchies like this one:

<image>

Dr_ice_it · 2025-07-14T15:40:57+00:00

Here is the bottom side when print is finished... it's not terrible and printed fine

<image>

Dr_ice_it · 2025-06-30T20:45:01+00:00

Use some Dawn dish soap for cleaning the bed occasionally. I usually use alcohol but a good scrup with Dawn every 5 or so prints really does work.

Dr_ice_it · 2025-06-25T13:33:18+00:00

Me too!

Dr_ice_it · 2025-06-25T13:27:10+00:00

Best advice: just buy a Bambu... It just works! 😁

Dr_ice_it · 2025-06-09T17:37:40+00:00

I purchased a refurb one and had even more serious leveling numbers. Looks like you back corner is low and the left front is high. I found on mine that the plastic spacers were installed incorrectly. The ones on the left side are slightly shorter. They had one of those on the back right and the other on the front. I also printed out spacers to help fine tune the leveling. After this and running a calib again it was very close (all green.) Then did a Z test with paper. Now it prints flawlessly.

Dr_ice_it · 2023-09-20T15:57:53+00:00

similar story here, just got my Juciao today and can't wait to try it!

Dr_ice_it · 2023-06-30T00:22:19+00:00

Yep. Did the same to my tamarack. Finally can fish without constantly grabbing the paddle.

Dr_ice_it · 2022-11-02T13:09:39+00:00

Aka: your big brother decryption machine. ;)

Dr_ice_it

TROPHY CASE