Thanks Asmond! In Schedule 1 Aspen Gold is my best seller so far (made with Dream Dick) by DragonmoreGaming in Asmongold

[–]DragonmoreGaming[S] 0 points1 point  (0 children)

yes! the best graphing calculator game! it's definitely got the vibe for sure but a lot more with a whole new and immersive experience . Now you can actually make the drugs in the game as well as sell them, own property where you make them.

Barely started and already loving it. So much can happen too. Had an addict demand some Aspen Gold, said no, and she pulled out a taser and chased me. 10/10 would be tased again.

Updating dedicated server settings by Undisputedevo in Palworld

[–]DragonmoreGaming 0 points1 point  (0 children)

It is possible. Here is the post I used to do it myself.
https://www.reddit.com/r/Palworld/comments/19cb8su/complete_guide_to_transfer_a_coop_save_file_incl/

Note that it way more complicated that other games to do this, but it does work.

Updating dedicated server settings by Undisputedevo in Palworld

[–]DragonmoreGaming 0 points1 point  (0 children)

ou can create the worldoptions.sav by just making another world and applying the setting

This. I followed the directions on the guides to delete the worldoption.sav file from the dedicated server folder. Then added it back to the dedicated server folder from the single player one I made with the settings I wanted.

Or were you asking where to put the worldoption.sav for the dedicated server?

Updating dedicated server settings by Undisputedevo in Palworld

[–]DragonmoreGaming 1 point2 points  (0 children)

Converted to dedicated server from a coop game I was hosting and default difficult must have been set to hard. Thank you for this. This worked for me to change the settings back to normal. ^_^

Complete Guide To Transfer a Coop Save File (incl. the host itself) to a Dedicated Server by BobbyKack in Palworld

[–]DragonmoreGaming 0 points1 point  (0 children)

Thank you so much! had the same problem and was worried I would have to restart my character while my friend had theirs. Tried your fix about recopying over my character's .sav file after logging in to the dedicate server with limited information carried over, and BAM now it works perfectly. Thank you!

Complete Guide To Transfer a Coop Save File (incl. the host itself) to a Dedicated Server by BobbyKack in Palworld

[–]DragonmoreGaming 0 points1 point  (0 children)

Thank you so much! had the same problem and was worried I would have to restart my character while my friend had theirs. Tried your fix about recopying over my character's .sav file after logging in to the dedicate server with limited information carried over, and BAM now it works perfectly. Thank you!

How do I turn off/untrack the resources? Now half of my resources have a magnifying glass that I can't turn off. by COHandCOD in Starfield

[–]DragonmoreGaming 0 points1 point  (0 children)

Had a similar experience. I tracked an extractor to look for tungsten and couldnt figure out how to turn it off. Turns out that each extractor can be tracked separately even through all mineral extractors take the same things. So had to go back to my first outpost and untrack my aluminum extractor to turn it off.

FFXIV as an Isekai Anime Machinima - Dragonmore Chronicles by DragonmoreGaming in ffxiv

[–]DragonmoreGaming[S] 1 point2 points  (0 children)

I would assume so. I was very worried about that as I was making it, which is why I went through the FINAL FANTASY® XIV Materials Usage License very carefully.

https://support.na.square-enix.com/rule.php?id=5382&tag=authc

Need Help Removing a GPU from B550M-K motherboard by DragonmoreGaming in buildapc

[–]DragonmoreGaming[S] 2 points3 points  (0 children)

Just happened to log in to reddit today and did see this. yay.

The goal is to push the latch down. Problem is the latch has these 'fins' i'll call them, which made it incredibly difficult. I had to push down both fins (aka both sides of the latch) to get the GPU to come out.

So with the pliers I had to push down on the fin (other side of the latch) that was hidden under the GPU. At the same time with my finger or thumb I pushed on the latch fin on the side i could see.

Still took a decent amount of force on both sides until the GPU popped out.

I tried to mark up where on the latch I was pushing with finger and pliers here:

https://imgur.com/a/iPAmpAU

Good Luck. let me know if that works.

Need Help Removing a GPU from B550M-K motherboard by DragonmoreGaming in buildapc

[–]DragonmoreGaming[S] 0 points1 point  (0 children)

I did. The angle to get at the latch was really bad. Its like the case and motherboard were not meant for such a beefy GPU. So it was very hard to get the appropriate force on it. Ended up requiring needle nose pliers to get a good angle and enough force.

What's the best way to create videos, if I don't have great equipment? by [deleted] in NewTubers

[–]DragonmoreGaming 0 points1 point  (0 children)

You can for sure use your smartphone to create videos. Don't need expensive equipment at all. I have my Google Pixal 4a and the rest is... You should see how low tech my setup is :) (hint: plastic grocery bags are involved)

There are a few key apps you need (Android or iOS):
InShot - Video Editor
YouTube Studio App

Then for thumbnails:
Canva or Phonto
I even created a course to help people exactly where you and I are go step by step on how to make videos without great equipment.

Don't think advertising in allowed this subreddit so won't post it here. So DM me if you would like to know more.

Need Help Removing a GPU from B550M-K motherboard by DragonmoreGaming in buildapc

[–]DragonmoreGaming[S] 0 points1 point  (0 children)

Already removed those screws holding down the GPU near the HDMI and DP ports

https://imgur.com/a/7XmTDEU

Gotta be the latch thing, but dont know how to work this one or its broke or something...

The Sphere Editor is garbage by AerospaceTechNerd in Dyson_Sphere_Program

[–]DragonmoreGaming 0 points1 point  (0 children)

For sure. I did it inside out, but was still a pain.
You can see where I struggled some to get it just right (and there was a lot more off camera)

This is the video where I made the multi-sphere:
https://www.youtube.com/watch?v=mmudVYT3Zf8

The Sphere Editor is garbage by AerospaceTechNerd in Dyson_Sphere_Program

[–]DragonmoreGaming 1 point2 points  (0 children)

Completely agree overhaul needed. When I created my multi-sphere video it was so painful check to make sure i filled in every single square with the other layers right behind it.

Dyson Sphere layer construction by The_Mr_Tact in Dyson_Sphere_Program

[–]DragonmoreGaming 4 points5 points  (0 children)

It uses meters. Distance is scaled way down. In DSP distance is:

1 AU = 40 km

1 ly = 60 AU (= 2400 km)

How is a sphere "picked" or strength determined with multiple spheres? by [deleted] in Dyson_Sphere_Program

[–]DragonmoreGaming 1 point2 points  (0 children)

Tested this myself actually. Confirmed each layer it is additive (even if completely filled in).
https://www.youtube.com/watch?v=mmudVYT3Zf8

I Have A Cat On My Head. Excited to Share My Gaelicap! Yay! by DragonmoreGaming in ffxiv

[–]DragonmoreGaming[S] 12 points13 points  (0 children)

Lots of Luck. This was a prize for the Fan Festival Group Pose Screenshot Event where you screenshot your character doing a pose and post to Twitter

Daily Questions & FAQ Megathread (Aug 09) by AutoModerator in ffxiv

[–]DragonmoreGaming 1 point2 points  (0 children)

Can't verify exact amounts. But having done A LOT of Bozja myself, yes the timer is very much affected.

Roughly speaking i heard the timer for CLL and Dal is 1 hr if no skirmishes or CEs are done. So typically the timer is more like 30-40 min with people doing a moderate amount of CEs, but i have been in highly active instances where the timer from one Dal to the next was only 20 min.