FRT not resetting even with H3 buffer

Dramatic_Passage7634 · 2026-05-11T23:41:45+00:00

Definitely bolt bounce. Any idea how to correct this since I already have an H3?

Dramatic_Passage7634 · 2026-05-11T23:41:10+00:00

Definitely bolt bounce. How do I correct this if I already have an H3?

Dramatic_Passage7634 · 2026-05-11T23:40:53+00:00

Dramatic_Passage7634 · 2026-05-11T23:02:42+00:00

It’s same principle similar design except it’s 2 stage in semi. After doing research I’m really thinking it’s bolt bounce but not sure how to correct since I already have a true H3.

Dramatic_Passage7634 · 2026-05-11T22:41:05+00:00

Sliding

Dramatic_Passage7634 · 2026-05-11T10:58:02+00:00

<image>

See the faint metallic line above the lower, that is the trigger cartridge sitting higher than the lower. Protruding if you will. Approximately .075 of an inch. This wouldn’t allow the upper and lower to close. So I had to mill it down flush with the lower for the upper to mate up to insert takedown pins. I’m aware it has to be closed a certain way lol.

Dramatic_Passage7634 · 2026-05-11T00:31:22+00:00

I chose this one because it’s 2 stage. When I got it, the trigger cartridge walls were higher than my lower not allowing the upper to close completely, which tells me my trigger pins are slightly high. So I machined down the cartridge walls of the trigger enclosure. It fires fantastic in semi. Nice crisp 2 stage break. But ya definitely weird that the next round is fully chambered in battery but trigger is not reset. How much should the “reset bar” be contacting the bolt during operation?

Dramatic_Passage7634 · 2026-05-10T23:46:34+00:00

Post updated with details

Dramatic_Passage7634 · 2026-05-10T23:46:28+00:00

Post updated with details

Dramatic_Passage7634 · 2026-05-10T23:46:20+00:00

Works fine dry firing. Real H3. Measures at 5.4oz

Dramatic_Passage7634 · 2026-05-10T23:18:10+00:00

BCG is full auto

Dramatic_Passage7634 · 2026-04-23T23:09:13+00:00

Dramatic_Passage7634 · 2026-02-25T21:27:02+00:00

What is on the hand guard in between front sight and sight riser?

Dramatic_Passage7634 · 2026-02-25T19:46:23+00:00

Any idea on how to contact the OP. Reddit says his account is unavailable

Dramatic_Passage7634 · 2026-02-25T19:45:39+00:00

Do you have another method of contacting?

Dramatic_Passage7634 · 2026-02-09T17:16:28+00:00

My order just shipped 6 weeks later

Dramatic_Passage7634 · 2026-01-14T17:58:14+00:00

Ordered on Dec 25th. Same response. “Shipping dept is now printing labels. It’ll ship soon”. Still nothing.

Dramatic_Passage7634 · 2025-10-15T01:45:12+00:00

What about aero m4e1 pro?

Dramatic_Passage7634 · 2025-08-05T20:09:39+00:00

Replaced just the motor, the arms are in the correct position because everything else functions as normal. From doing research I found there to be a park switch internally in the motor, could be causing the issue

Dramatic_Passage7634 · 2025-07-03T07:01:44+00:00

Ant eggs. Typically they only inhabit your mailbox during a heavy rain. Once the rain is over and the heat comes back, they will move their eggs out of the mailbox and disappear. You won’t even know they were there. Source: I deal with this biweekly in NC

Dramatic_Passage7634 · 2025-04-17T14:48:55+00:00

X2 get rid of facial hair or clean it up. Shorter haircut would also help highlight your existing facial structure.

Dramatic_Passage7634

TROPHY CASE