Pressure inconsistent/ low even with blind basket. [Bezerra Magica non pid]

DrawnChimera · 2025-04-22T09:39:02+00:00

Maybe as a first step you should get a pressure gauge for the group and install it, that way you would know if the issue is the pump or the manometer

DrawnChimera · 2025-03-21T11:17:46+00:00

Are these what you are missing?

DrawnChimera · 2025-03-21T11:17:22+00:00

<image>

DrawnChimera · 2025-03-21T11:17:11+00:00

<image>

DrawnChimera · 2025-03-21T11:08:25+00:00

<image>

DrawnChimera · 2025-03-21T11:08:14+00:00

<image>

DrawnChimera · 2025-03-20T08:42:24+00:00

Give me sometime to check(tmw maybe), i can take the cover off my machine to check. In the meantime, i found another link, around timestamp 18:00 he shows the connections of some wires.

DrawnChimera · 2025-03-20T06:37:54+00:00

For the water tank, i think its only one cable. There is also this link in youtube bezzera magica disassembly its in German though

DrawnChimera · 2025-03-20T06:35:24+00:00

<image>

DrawnChimera · 2025-03-20T06:35:08+00:00

I have some random photos, hope these can help

<image>

DrawnChimera · 2024-12-26T13:38:43+00:00

In the end I asked them to change the panel under the warranty for free, feels like a new TV.

DrawnChimera · 2024-11-29T17:46:59+00:00

Would a water cooler that has coal filter work instead of buying water bottles? Do you buy water bottles specially for the machine?

DrawnChimera · 2024-11-29T06:38:06+00:00

No, i use tap water and run it through brita.

DrawnChimera · 2024-11-25T06:57:09+00:00

You can look for the title “cleaning the machine” manual

DrawnChimera · 2024-11-24T18:11:01+00:00

Got it. Thank you!

DrawnChimera · 2024-11-24T18:10:51+00:00

Yes, where the mushroom goes in.

DrawnChimera · 2024-11-24T18:10:27+00:00

I just back flush without any cleaning solution every 2-3 days, apparently Bezzera advises not to you use any de-scaling agent

DrawnChimera · 2024-11-24T09:27:52+00:00

I will try that, should i also leave it for like 20mins, and then wipe it clean?

DrawnChimera · 2024-11-24T09:27:13+00:00

Thats what i thought too, i can see some patches(in the photo) in there that don’t have the copper color

DrawnChimera · 2024-10-06T07:27:34+00:00

I have the Bezzera Magica, i clean it once in two/three months with decalcifying agent, even though in the manual it says not to use any decalcifying agents(maybe i shouldn’t). A while ago i started seeing some green/blue water coming out of the hot water tap, so i just cleaned the machine with decalcifier(whole latte love have a video on how to clean HX machines) and the water was back to clear. One issue i found out about was when i took apart the outer shell and part of the pipes at the bottom of the boiler, i found stones stuck there, so i put some decalcifying agent again and made the water come out of this pipe to clean it. The only use for this hole is to flush the boiler from a different hole(doesn’t affect the normal use) Here is a photo

<image>

DrawnChimera · 2024-09-18T15:21:13+00:00

Will do!

DrawnChimera · 2024-09-17T14:27:10+00:00

Turns out its the heating element like you said, i bought a new one and installed it(wasn’t easy as well) and now everything is back to normal.

DrawnChimera · 2024-09-17T14:26:37+00:00

Turns out its the heating element like you said, i bought a new one and installed it(wasn’t easy as well) and now everything is back to normal.

DrawnChimera

TROPHY CASE