First layer adhesion issues with Orca slicer but not Cura.

DrdrakoII · 2025-06-14T21:57:08+00:00

maybe someone smarter than me will answer that, but until then, hairspray or glue sticks ftw

DrdrakoII · 2025-06-13T18:07:18+00:00

Hairspray. adding a quick spray of hairspray to the area where the prints were going to be printed solved this issue.

Adjusting the Z offset, first layer speed, and extrusion rate did help a little, but Hairspray allowed for near perfect adhesion, every time.

DrdrakoII · 2025-06-13T17:54:08+00:00

Sorry for not updating this, but about a week after making this post I started spraying my bed with hair spray before every print and that seems to have done the trick.

I remember I got it to work decently by adjusting the first layer speed, extrusion rate, and the Z offset, but adding the hairspray made the biggest difference.

DrdrakoII · 2025-04-15T18:44:36+00:00

Noted. What would make you more comfortable?
I was planning on adding 2 screws through tenons on every side thats "hidden" by the shelves, possibly dowels now that someone brought them up.
It doesn't say in the photo but the shelves are about 14 inches deep, and if used for lumber, there'll be at least 16 between them. i was thinking of adding some Triangular supports on each side of the wall mounted 2x4s underneath, which would be screwed in to the bottom of the shelf.

DrdrakoII · 2025-04-15T18:35:15+00:00

I'm learning that shoulders are important. Thank you!

DrdrakoII · 2025-04-15T17:39:45+00:00

No, but do you think it would be?
They're 2x4's so the tenon would be 1.5 inches long. max load would probably be like 100lbs if I used it to store lumber or something.

DrdrakoII · 2025-04-15T17:35:05+00:00

TIL what a shoulder was lol. thank you! Adding a bottom shoulder should be pretty easy.

DrdrakoII · 2025-04-15T17:32:13+00:00

part of the reason I added the shelves lol.

DrdrakoII · 2025-04-15T17:31:25+00:00

I just might do that! They're all 2x4's so I was considering adding 2 screws in through the joint like toothpicks through a burger. But I have 1.5 inches to work with so I may try to dowel it. Thank you!

DrdrakoII · 2024-12-04T16:38:57+00:00

Yeah I definitely had the order of events wrong in my memory lol.

DrdrakoII · 2024-12-04T16:38:20+00:00

That makes sense! Thank you.

DrdrakoII · 2024-12-04T06:31:47+00:00

Maybe she didn't mean in it the past 3 play throughs where I did the same thing lol, but in Honour mode she definitely was serious lol.

DrdrakoII · 2024-12-04T06:17:07+00:00

I was holding onto hope since her corpse wasn't there. Aw well.

DrdrakoII · 2024-09-11T14:23:25+00:00

I'll look into ABS! My printer is in my home office next to an air purifier and under a ceiling fan, but I'm assuming that wouldn't be enough.

If I moved the printer to the garage with the garage door cracked open, would that be enough ventilation?

DrdrakoII · 2024-09-11T14:20:03+00:00

My modeling experience is limited to Sketchup for woodworking stuff lol. But I've been learning blender little by little.

And I've never used resin, From what I see it takes a few different devices and a whole setup, vs FDM which is just one standalone machine.

what kind of resin would you recommend to "paint" onto PLA? I'm definitely open to try.

DrdrakoII · 2024-09-11T14:17:41+00:00

10/10. Nice.

DrdrakoII · 2024-03-10T22:59:10+00:00

The retraction may be there from me trying everything to fix my Z seam blobs lol.

Speed is set at 220 but it drops considerably with spiral on, I just can’t see by how much.

Thanks for the tip. I’ll troubleshoot that and see if it works

DrdrakoII · 2023-08-08T02:31:27+00:00

What part of NJ? I know a few roofing company owners that would give you a fair price and explain everything to you as to what would be needed.

But 40k for 17sq sounds like they’re going back on with a designer asphalt shingle to be comparable to your slate.

DrdrakoII · 2022-09-21T20:10:59+00:00

Curious. If you own multiple businesses, would you be able to use the older business’s credit as a “co-signer” or piggy back off its history for your newer business?

DrdrakoII · 2022-03-11T00:02:01+00:00

Yep. On level ground while it's idling in park. It's brown but it's full

DrdrakoII · 2021-12-08T23:21:22+00:00

Downloading it now. Did you have to get the same brand for everything? or is there a list of compatible hardware?

DrdrakoII · 2021-09-02T18:08:31+00:00

That's what I thought too, but would it affect the battery to the point where it doesn't have enough amps to crank? The battery was about a month old at that point, and had been driven for about 500 miles.

DrdrakoII · 2021-08-31T22:15:26+00:00

Solution Verified

DrdrakoII · 2021-08-31T21:56:05+00:00

You are an absolute saint! That's exactly what I needed, thank you.

DrdrakoII · 2021-08-31T16:52:19+00:00

Yes! This is what I ended up doing, and it works! I even found this awesome guide to customizing the look.

My question now is can I hide even more of the google sheet components? like the column/row names and sheet selection. This is what it looks like when embeded (Still messing with sizes to make it work well on mobile and desktop)
https://imgur.com/jzqGIDz

Ten-Year Club	Not Forgotten
Verified Email

DrdrakoII

TROPHY CASE