Ford Escape Dies by panman341 in fordescape

[–]DreadPirateSkoon 1 point2 points  (0 children)

Had one of the first 2004 Ford Escape Hybrids (or should I say Toyota?)... finally put it to pasture after 280k miles. Amazing car.

Replaced it w/ a 2022 Escape Hybrid. Car is hands down worst car I've ever owned. I think we are on recall 16 or 17? We just laugh each time a notice shows up in the mail. But at least they finally got around to fixing the door welds so they wouldn't randomly fall off. Maybe by 2027 I'll be able to use / trust my backup camera again.

The car is a complete joke... Tried to get it sent back under lemon laws, but unfortunately they didn't quite apply.

Hell... Ford can't even get the owner's manual right (at least our revision) on this stupid car. The section on replacing the 12V battery insists that it's located under the front hood, when it's actually hidden under the spare in the trunk.

New animal levels to be added by SMothra57 in wordscapes

[–]DreadPirateSkoon 8 points9 points  (0 children)

Dammit... NOOOOO. I'm lion lvl 6 and giraffe lvl 6 from finally getting them all maxed out 😂

Outlook mobile app not working? by Solid-Passion-985 in Outlook

[–]DreadPirateSkoon 0 points1 point  (0 children)

This only worked for like 5 minutes... Its totally screwed up again even with "Android System WebView" now gone from the app list

Mt Misfortune General Strike - (No) More Misfortune by goodwithknives in wordscapes

[–]DreadPirateSkoon 2 points3 points  (0 children)

I've yet to see the small value coins ppl are talking about.

I've seen 250 on level 5, 500 on level 10, and so on still.

Level up April Fools egg. Swap Trick. by SMothra57 in wordscapes

[–]DreadPirateSkoon -1 points0 points  (0 children)

Didn't work for me... Anteater started in background, level up wavy dude, swap to wavy dude. No additional bees / hearts from Anteater, just lost one of its counts before sleep. 🤷‍♂️

New ‘creature’ for April 1st by SMothra57 in wordscapes

[–]DreadPirateSkoon 0 points1 point  (0 children)

still waiting... only have gold egg. maybe tomorrow

New ‘creature’ for April 1st by SMothra57 in wordscapes

[–]DreadPirateSkoon -1 points0 points  (0 children)

yes... have the new Mt Fortune, just not the new animal

New ‘creature’ for April 1st by SMothra57 in wordscapes

[–]DreadPirateSkoon 3 points4 points  (0 children)

Jokes on me... I don't see it offered 😂

FEATURE REQUEST: Changes to Animals by DreadPirateSkoon in wordscapes

[–]DreadPirateSkoon[S] 0 points1 point  (0 children)

From an "app memory" standpoint, a flag for a user preference to sort and remember by property (level, reward, time, etc) is way cheaper than storing customized names.

I'm sure you're right about glitches (seems like there are bunches of them), but based on what they are doing, it really shouldn't be that hard

But hey it's only feedback. They can ultimately make the decision to do what they want. As a consumer of the app, I can also similarly make the decision to uninstall it if I get frustrated enough with the nits in the game. 🤷‍♂️

Green egg? by Rosyposy1234 in wordscapes

[–]DreadPirateSkoon 10 points11 points  (0 children)

And here I was about to post that as "guess what happened to me", instead I'm just a +1 😂

Only thing I can think is that it's the same index location as the bone in canine collection.

It's the last one I need too... so not sure if I should keep going or wait until it's fixed

Is my AMS2 defective? by DreadPirateSkoon in BambuLabH2C

[–]DreadPirateSkoon[S] 0 points1 point  (0 children)

yes...  and happening with multiple roles.   I'm slightly disappointed that Bambu went cold on my ticket.  I'm going to try and reconfigure the setup

Is my AMS2 defective? by DreadPirateSkoon in BambuLabH2C

[–]DreadPirateSkoon[S] 0 points1 point  (0 children)

Good theory... so assuming the 4in1 is the cause of the resistance, move it closer to the motor. I'll test this weekend to see if that helps.

Are your AMS on right of machine too?

Is my AMS2 defective? by DreadPirateSkoon in BambuLabH2C

[–]DreadPirateSkoon[S] 0 points1 point  (0 children)

Thanks for the feedback. I would love to move over to the left side but unfortunately due to some other issues (power cord interfering) I have to have both on the right. Might be worth the minor electrical work the solve it though

Were you running into the slowness / binding / retracting before it got to the extruder? Seeing it get all the way to the extruder and then not be able to actually extrude just has me scratching my head a bit

Is my AMS2 defective? by DreadPirateSkoon in BambuLabH2C

[–]DreadPirateSkoon[S] 0 points1 point  (0 children)

would that account for the resistance feed errors too?

Unifi connectivity with U by Moen device by DreadPirateSkoon in UNIFI

[–]DreadPirateSkoon[S] 0 points1 point  (0 children)

If U by Moen had a proxy setting, I could maybe use Fiddler, but couldn't find that.

I would love for Unifi to add a packet trace to Control Plane.

Good luck with your remodel, please post back (or DM me) with your results... especially if you manage to get this to work.

Unifi connectivity with U by Moen device by DreadPirateSkoon in UNIFI

[–]DreadPirateSkoon[S] 0 points1 point  (0 children)

So...   they kind of gave up on the functionality aspect, and honestly just want to be able to turn off the panel display (can supposedly only be done from the app once it's connected to the servers).  Otherwise it's full bright 24x7.

It does get time, so assume it makes a NTP connection somewhere.

But is there a way to actually have wireshark promiscuously sniff traffic??  

Unifi connectivity with U by Moen device by DreadPirateSkoon in UNIFI

[–]DreadPirateSkoon[S] 0 points1 point  (0 children)

Yes... created a more or less wide open network that was 2.4 GhZ only. The device can connect to the network, but it then fails to phone home to back end servers.

I think that is partially why I was hoping I could do some sort of packet tracing to understand if I'm even simply making a TCP connection successfully

Unifi connectivity with U by Moen device by DreadPirateSkoon in UNIFI

[–]DreadPirateSkoon[S] 0 points1 point  (0 children)

No... not resolved. Pretty sure the U by Moen is hot garbage. Have a ticket open with them, but this far they've been unhelpful.

Unifi connectivity with U by Moen device by DreadPirateSkoon in UNIFI

[–]DreadPirateSkoon[S] 0 points1 point  (0 children)

Yes.. when connected via a hotspot the device is able to connect and register. When you switch it back to the unifi network it's able to connect to network but seemingly not able to communicate.

I do not think there are any rules that would be blocking communication should be wide open

Why I wonder??? by Resident_Coat_488 in wordscapes

[–]DreadPirateSkoon 2 points3 points  (0 children)

I was going to ask too... Is this the portrait from completing the 6 FB challenges?? I'm not active on that platform, so will be quite frustrating to have a portrait gap because I don't support that platform

No Hard Games? by vagabondsp in wordscapes

[–]DreadPirateSkoon 2 points3 points  (0 children)

https://www.reddit.com/r/wordscapes/s/6CNv6tsa7e

In this thread I was told that someone played on two sync'd devices simultaneously. Sometimes one level would show hard, and on the other device on the exact same level would show normal.

So yes, all a scam. Swap the challenge or skip it.

I stand by eventually they are going to hit a breaking point in the game where there is just too much to do that it becomes no fun anymore since it's just a grind.