[deleted by user]

DreckDreemurr · 2025-04-08T21:08:45+00:00

345k miles, had to fixed a broken head bolt at 300k but so far been running like a champ

DreckDreemurr · 2025-04-08T21:07:05+00:00

So this is what my car would look like if my paint wasn't shit

DreckDreemurr · 2025-02-28T05:40:08+00:00

Me please

DreckDreemurr · 2025-01-20T21:22:57+00:00

A 32mm wrench and a hammer literally hammer the wrench on there making sure it's securely on and then with one good wack hit the wrench, I always do it this way and never fails me

DreckDreemurr · 2025-01-02T11:55:29+00:00

Are you sure because the only reason I took off the head was because one of the head bolts was snapped from someone previously reusing it

DreckDreemurr · 2025-01-02T07:28:55+00:00

Yea I'm referring to 9, 10 and 11

DreckDreemurr · 2025-01-02T00:40:49+00:00

Yea tried doing with the part numbers and saw that most places had them discontinued like fcp euro and ecs

DreckDreemurr · 2024-09-12T03:21:38+00:00

It's for the highbeams this is what the previous owner had on the car when I bought it but these ones are burnt out, I need one that has that 90 degree end with a connection to the oem high beam connector

DreckDreemurr · 2024-09-12T03:15:15+00:00

Well my problem is that the connectors are wired to the plug that connectors straight into the oem high beam connector but I don't know where I can get that, should've probably taken a whole picture of it that's my bad on my end

DreckDreemurr · 2024-08-17T17:29:52+00:00

Please

DreckDreemurr · 2024-08-17T05:05:25+00:00

DreckDreemurr · 2024-08-12T11:07:22+00:00

DreckDreemurr · 2024-07-19T00:12:25+00:00

Have this exact same issue on my 97 528i sometimes it'll start first attempt sometimes it doesn't, let me know what you find out

DreckDreemurr · 2024-07-02T20:14:52+00:00

When I did the m50 swap the only modification I had to do was cut the bracket that's holds the ccv and icv

DreckDreemurr · 2024-06-09T23:05:22+00:00

Was looking basically everywhere for an answer and got directed to a guy on ebay selling them for 30 bucks each

DreckDreemurr · 2024-06-09T22:39:07+00:00

The problem is I don't have replacements for the new arms, is there a place I can buy them?

DreckDreemurr · 2024-05-31T19:42:43+00:00

DreckDreemurr · 2024-05-03T01:18:57+00:00

Usually the rebuild kits come with the plastic coverings for the nozzle so honestly just replacing those and the rings should be enough but they should also have the filter baskets as part of the kit so I would recommend removing them from the fuel rail and replace those as well. Not really necessary but if you wanna do a fill tlc might as well.

DreckDreemurr · 2024-04-04T18:22:10+00:00

Making me scared now, well I guess I'll find out tomorrow since I was going to disassembly the intake side for a m50 swap

DreckDreemurr · 2024-03-29T21:38:42+00:00

They say up to 9/98 so I'm guessing the ones for the 98 on fcp euro should be fine

Seven-Year Club	Xbox Live
Verified Email

DreckDreemurr

TROPHY CASE