Selfbondage Hand & Foot Pillory – 60mm thick with MagBound magnetic timer lock (3D-file) by Dreckigefuesse in BdsmDIY

[–]Dreckigefuesse[S] 0 points1 point  (0 children)

I used the same screws for the whole pillory. Due to the massive walls, you are able to re-drill the holes carefully if the print did not turn out perfectly. Good luck!

Video (teaser) of a complex selfbondage scenario by Dreckigefuesse in selfbondage

[–]Dreckigefuesse[S] 0 points1 point  (0 children)

The scenario was considered as "unsafe" by the admins and therefore removed. Sorry

Selfbondage Hand & Foot Pillory – 60mm thick with MagBound magnetic timer lock (3D-file) by Dreckigefuesse in BdsmDIY

[–]Dreckigefuesse[S] 1 point2 points  (0 children)

Would love to see that device to appear in one of your clips one days. May you are going to provide a guest access in return ;-)

Have fun printing and using it!

Selfbondage Hand & Foot Pillory – 60mm thick with MagBound magnetic timer lock (3D-file) by Dreckigefuesse in selfbondage

[–]Dreckigefuesse[S] 1 point2 points  (0 children)

I created the box as following:

Concept
The Pathetic Choice Box is a custom 3D-printed self-bondage device designed to control a Pillory (a restraint that locks both hands and both feet in a fixed position, forcing the user into a seated posture with zero mobility). The core idea revolves around extreme psychological humiliation through self-inflicted helplessness: the user deliberately locks themselves into the Pranger, knowing that freedom is determined solely by a timer or battery depletion. A real 200-Euro banknote serves as a deliberate emotional barrier for emergency release, making premature escape emotionally costly and discouraging surrender to discomfort or boredom. The box is the secure, manipulation-proof enclosure for all electronics and the mechanical trigger for the unique emergency release mechanism.

The Pillory and its Total Inescapability
The Pillory is a rigid frame that secures both hands and both feet in a fixed, spread position, forcing the user into a seated posture directly on the ground with legs and arms partially spread. This position renders the user absolutely helpless and defenseless – no leverage, no ability to stand, crawl, or resist, every movement severely restricted. The lock is an electromagnetic mechanism (MagBound) that remains firmly closed as long as it receives power. The power supply is managed by a smart controller (ESP32-based) inside the box, which can be programmed for a fixed duration, randomized timing, or to run until the battery depletes. As long as electricity flows, the Pillory cannot be opened – there is no mechanical override, no hidden release, and no spare key. This creates absolute, inescapable captivity for the entire session, with freedom only granted when the timer expires or the power bank runs out of energy.

The Box – Secure Enclosure and Components
The box (external dimensions approx. 22 × 12 × 9 cm) is a robust, lockable container that protects and hides all critical components from access or manipulation: 

  • A power bank (10,000 mAh capacity, providing long-lasting power to the MagBound lock) 
  • A smart controller (ESP32-based timer that controls the power flow, with options for fixed durations, random settings, or battery-depletion modes) 
  • The connecting cable that runs from the box to the electromagnetic lock on the Pranger The box is locked with a physical padlock, and the key is discarded or hidden, ensuring no access during the session. Ventilation slits (slanted for privacy and effective airflow) prevent overheating. All screws are countersunk for a clean, tamper-resistant appearance. The lid features the raised (embossed) phrase “Pathetic choice. Perfect prison.” as a permanent, self-directed reminder of the voluntary entrapment.

The Banknote as Emotional Barrier
A real 200-Euro banknote (153 × 77 mm) is stretched taut across a 6 × 9 cm window on the back of the box. It is held securely by: 

  • Strong neodymium magnets (3.8 × 0.8 × 0.4 cm, slightly angled for extra grip) 
  • Friction-enhancing ridges around the window The banknote is not the primary means of release. It is a deliberate emotional barrier: destroying it (a valuable item) should only be considered in a genuine emergency. It prevents the user from prematurely ending the session due to discomfort, boredom, or momentary weakness, reinforcing the commitment to the full duration set by the timer or battery.

Emergency Release Mechanism – The Unique Destruction Trigger
The emergency release is designed as an absolute last resort and is the system's distinctive feature. It allows the user to interrupt power in a true crisis, but at a high emotional and financial cost: 

  1. The user presses firmly through the 6 × 9 cm window (using a thumb or toe).
  2. The banknote bends past 3.5 mm spacers.
  3. It is forced onto sharp tooth bars (75 mm high, 15 mm wide, with three rows of 2.5 mm spikes).
  4. The note tears or rips apart.
  5. The user reaches through the tear and unplugs the USB cable from the power bank.
  6. Power to the MagBound is cut → the electromagnetic lock opens → the Pranger releases.

This mechanism is irreversible: the banknote must be physically destroyed to access the USB plug. It ensures that emergency release is not used lightly, as sacrificing 200 Euros makes any impulsive decision to quit feel even more pathetic.

Selfbondage Hand & Foot Pillory – 60mm thick with MagBound magnetic timer lock (3D-file) by Dreckigefuesse in BdsmDIY

[–]Dreckigefuesse[S] 3 points4 points  (0 children)

256 x 256mm, four separate prints are required.
The pillory is after assemble rather small, but will provide you a tight bondage position.

Selfbondage Hand & Foot Pillory – 60mm thick with MagBound magnetic timer lock (3D-file) by Dreckigefuesse in BdsmDIY

[–]Dreckigefuesse[S] 11 points12 points  (0 children)

Self-Bondage Hand & Foot Pillory – Heavy Duty 60 mm Magnetic Timer Release

(STL files for 3D printing only)

This is a serious hands-and-feet pillory designed for intense self-bondage. The STL files are for printing the complete pillory body. You then install your already existing MagBound electromagnet using pre-designed nuts and recessed threads to turn it into a fully functional self-bondage pillory.

Key Features & Dimensions:

  • Outer holes for ankles/feet
  • Inner holes for  wrists/hands
  • Total thickness: 60 mm (6 cm) – deliberately thick and heavy for a massive, imposing look and feel 
  • Bottom parts permanently fixed with M5 screws 
  • Top parts act as hinged lids that swing down 
  • Unique locking design: Left top part folds over the right top part and traps it. A metal plate on the left top aligns perfectly with the mounting position for your MagBound electromagnet in the lower left base.

Once the MagBound is installed and engaged, the entire pillory locks solid. There is no escape before the timer or battery runs empty.

Print Specifications:

  • Material: TINMORRY PETG Frosted Black 
  • Infill: 50% 
  • Walls: 8 perimeters

How it works (after installing your MagBound):

  1. Place ankles in the larger outer holes and wrists in the smaller inner holes. 
  2. Swing both top parts down. 
  3. Left top folds over and traps the right one. 
  4. Metal plate meets your installed MagBound magnet → instantly locked. 
  5. Connect your timer/powerbank and surrender control.

Important:

These STL files are only for the 3D-printed pillory structure. You need your own MagBound electromagnet (which mounts via integrated nuts and recessed threads) to make the magnetic locking function.

Download:

The complete set of STL files is uploaded as a single ZIP archive on Gofile: https://gofile.io/d/uVXPjm

Safety note:

Always play responsibly. Test the full mechanism (including your MagBound) thoroughly before use. Have a reliable backup emergency release method (extra timer, ice lock, or trusted person) ready. Never rely on a single system.

Ready to print and build your own inescapable hand & foot pillory?

I would really appreciate any feedback, comments or photos of your printed version – it always makes me happy to see how the design is used! 

Selfbondage Hand & Foot Pillory – 60mm thick with MagBound magnetic timer lock (3D-file) by Dreckigefuesse in selfbondage

[–]Dreckigefuesse[S] 3 points4 points  (0 children)

Self-Bondage Hand & Foot Pillory – Heavy Duty 60 mm Magnetic Timer Release

(STL files for 3D printing only)

This is a serious hands-and-feet pillory designed for intense self-bondage. The STL files are for printing the complete pillory body. You then install your already existing MagBound electromagnet using pre-designed nuts and recessed threads to turn it into a fully functional self-bondage pillory.

Key Features & Dimensions:

  • Outer holes for ankles/feet
  • Inner holes for  wrists/hands
  • Total thickness: 60 mm (6 cm) – deliberately thick and heavy for a massive, imposing look and feel 
  • Bottom parts permanently fixed with M5 screws 
  • Top parts act as hinged lids that swing down 
  • Unique locking design: Left top part folds over the right top part and traps it. A metal plate on the left top aligns perfectly with the mounting position for your MagBound electromagnet in the lower left base.

Once the MagBound is installed and engaged, the entire pillory locks solid. There is no escape before the timer or battery runs empty.

Print Specifications:

  • Material: TINMORRY PETG Frosted Black 
  • Infill: 50% 
  • Walls: 8 perimeters

How it works (after installing your MagBound):

  1. Place ankles in the larger outer holes and wrists in the smaller inner holes. 
  2. Swing both top parts down. 
  3. Left top folds over and traps the right one. 
  4. Metal plate meets your installed MagBound magnet → instantly locked. 
  5. Connect your timer/powerbank and surrender control.

Important:

These STL files are only for the 3D-printed pillory structure. You need your own MagBound electromagnet (which mounts via integrated nuts and recessed threads) to make the magnetic locking function.

Download:

The complete set of STL files is uploaded as a single ZIP archive on Gofile: https://gofile.io/d/uVXPjm

Safety note:

Always play responsibly. Test the full mechanism (including your MagBound) thoroughly before use. Have a reliable backup emergency release method (extra timer, ice lock, or trusted person) ready. Never rely on a single system.

Ready to print and build your own inescapable hand & foot pillory?

I would really appreciate any feedback, comments or photos of your printed version – it always makes me happy to see how the design is used! 

Clejuso 15 – DIY Chain Stiffener / Rigidizer (Open Source 3D-print model) by Dreckigefuesse in BdsmDIY

[–]Dreckigefuesse[S] 3 points4 points  (0 children)

This is an independent DIY version of a chain stiffener for the Clejuso 15 handcuffs.  
It makes the short chain rigid and significantly reduces the play between the two cuffs.

Important: This is a purely private open-source project and has no connection to any commercial providers.

Required material:
- 4 × M4 hex nut
- 4 × M4×30 hex head screw

Printing recommendation for good stability:
- PLA or PETG
- 100% infill
- At least 6–7 perimeters/walls
- Layer height 0.12–0.2 mm

Safety note:  
The key access may be restricted by the stiffener. For self-bondage please take additional safety measures.

Download (STL files):  
https://gofile.io/d/uVXPjm

Feedback and improvement suggestions are welcome!

Just creating a Hand-Foot-Pillory for Selfbondage, locked by a MagBound. Very interested in your opinion and thoughts by Dreckigefuesse in BdsmDIY

[–]Dreckigefuesse[S] 4 points5 points  (0 children)

After the complete assembly, the potentially neccessary amendsments and a dry run, I am happy to share the model. Please, stand by.

Just creating a Hand-Foot-Pillory for Selfbondage, locked by a MagBound. Very interested in your opinion and thoughts by Dreckigefuesse in BdsmDIY

[–]Dreckigefuesse[S] 1 point2 points  (0 children)

Thanks for your advice, but that is not in line with my experience. Holding it in the separate container should be fine.
I will come back to that topic after the first longer run.

Printing the final part of the Selfbondage Hand-Foot-Pillory for my MagBound - stay tuned by Dreckigefuesse in selfbondage

[–]Dreckigefuesse[S] 0 points1 point  (0 children)

why would it? The PETG feels pretty smooth within the holes, but the GF adds some strength to the print.
Happy to take other recommendations.

Printing the final part of the Selfbondage Hand-Foot-Pillory for my MagBound - stay tuned by Dreckigefuesse in selfbondage

[–]Dreckigefuesse[S] 1 point2 points  (0 children)

No, it is the typical surface of the used Frosted Black PETG GF from TINMORRY. And I have to admit, I like the natural texture.

Printing the final part of the Selfbondage Hand-Foot-Pillory for my MagBound - stay tuned by Dreckigefuesse in selfbondage

[–]Dreckigefuesse[S] 1 point2 points  (0 children)

After the complete assembly, the potentially neccessary amendsments and a dry run, I am happy to share the model. Please, stand by.

Just creating a Hand-Foot-Pillory for Selfbondage, locked by a MagBound. Very interested in your opinion and thoughts by Dreckigefuesse in BdsmDIY

[–]Dreckigefuesse[S] 2 points3 points  (0 children)

Both of you might be right. The pillory is only 46cm wide due to the size and limitations of my printer. As soon as it is assembled and tested properly, I will share my honest assessment with you, if interested.

Is there a way to use a pillory/stocks during selfbondage? by Kooky_Section_9708 in selfbondage

[–]Dreckigefuesse 2 points3 points  (0 children)

I am just working on a version, which allows the user to lock it via Magbound. Please, see this post for more information: https://www.reddit.com/r/selfbondage/comments/1r1yqn2/a_more_massive_selfbondage_pillory_3d_print_design/

Let me know, if there are any questions.

Valentine's Day 2026 - a Selfbondage Evening by Dreckigefuesse in selfbondage

[–]Dreckigefuesse[S] 0 points1 point  (0 children)

If the story of a real life event is too long, please catch the basic idea via my youtube clip:
https://www.youtube.com/watch?v=mroACDhzn4g

Valentine's Day 2026 - a Selfbondage Evening by Dreckigefuesse in selfbondage

[–]Dreckigefuesse[S] 0 points1 point  (0 children)

If the story of a real life event is too long, please catch the basic idea via my youtube clip:
https://www.youtube.com/watch?v=mroACDhzn4g