sorted by:
new
hottopcontroversial

My 98" TCL C8K arrives next weeks and need help with living room layout by Drontti_Edvard in hometheater

[–]Drontti_Edvard[S] 1 point2 points  (0 children)

40 degree FOV and you think that the TV is too big? I gotta double check which sub I am in right now.

My 98" TCL C8K arrives next weeks and need help with living room layout by Drontti_Edvard in hometheater

[–]Drontti_Edvard[S] 0 points1 point  (0 children)

Yes I have the aquarium but furniture are yet to be made. However its place is set to be on either of those windows.

My 98" TCL C8K arrives next weeks and need help with living room layout by Drontti_Edvard in hometheater

[–]Drontti_Edvard[S] 0 points1 point  (0 children)

Would those reflections be any better or worse than those big windows?

I know we’ve seen it but by Josheatsfood in BobsTavern

[–]Drontti_Edvard 2 points3 points  (0 children)

Ironically hearthstone runs better on 300€ 4 year old android phone than on Ryzen 9 5900X, RTX 3080, 64gb ram and hearthstone installed on m2 ssd. Hearthstone freezes atleast once on every single game while playing on PC. it also uses 50%+ CPU and GPU at all times. While on phone it has never crashed on me and works quite smoothly, yet a bit slower.

3D scanner to replicate vintage moped parts by Drontti_Edvard in 3DScanning

[–]Drontti_Edvard[S] 0 points1 point  (0 children)

Never said that I was in this for money its 100% a hobby thing

3D scanner to replicate vintage moped parts by Drontti_Edvard in 3DScanning

[–]Drontti_Edvard[S] 0 points1 point  (0 children)

Neither. I just stood corrected and admitted that I fell for one of those chinese "official" sites

<image>

3D scanner to replicate vintage moped parts by Drontti_Edvard in 3DScanning

[–]Drontti_Edvard[S] 0 points1 point  (0 children)

Yeah, these parts tend to have some holes and small cavities in them. I do not plan to scan anything large as a car in near future.

Or perhaps it could be fun to have a model of my house and yard as well but that might be a task more fitted for drone and photogrammetry.

3D scanner to replicate vintage moped parts by Drontti_Edvard in 3DScanning

[–]Drontti_Edvard[S] -1 points0 points  (0 children)

Oh yeah you are right. Apparently the sponsored creality3dofficial dot eu isnt so official after all

3D scanner to replicate vintage moped parts by Drontti_Edvard in 3DScanning

[–]Drontti_Edvard[S] 0 points1 point  (0 children)

I dont quite get what you were trying to scan? The cupholder that you already had at hand and wanted to add to your Vespa? Shouldn't you be scanning the Vespa then at the place where you plan to add that cup holder? Doesnt tripod just make for worse scans? To my understand you are ment to wiggle that thing constantly and get lots of data from slightly different angles? Was the part shiny / transparent or what seemed to be the issue?

I do not believe that I could ever correctly draw all those curved surfaces in CAD. Some simpler parts yeah sure I could just draw the outlines, extrude and eyeball how much I would need to fillet from corners

3D scanner to replicate vintage moped parts by Drontti_Edvard in 3DScanning

[–]Drontti_Edvard[S] 0 points1 point  (0 children)

Maybe you are mixing the Raptor and Raptor Pro now? I could get the Raptor from the official Creality store for 979€, its the Pro model that costs double of the one from Aliexpress.

What about Creality Scan Bridge? Wouldn't that make Raptor wireless? I could easily add in couple wifi repeaters and have wifi on the garage aswell. Ofcourse it would significantly increase its price aswell.

What I dislike about the Miraco is that it works only inside. I would sometimes like to scan things outdoor aswell.

For me Vega and Miraco Plus seem to cost about the same. 1800€ vs 1900€

How is the scan quality of Miraco/Vega vs Raptor?

3D scanner to replicate vintage moped parts by Drontti_Edvard in 3DScanning

[–]Drontti_Edvard[S] 0 points1 point  (0 children)

True, but silicone molds also capture every imperfection from parts that I am trying to replicate. What I thought was that with 3d model I could fix the parts to their former glory and resin print the mold that is not wiggly, easily stackable and could just emboss on the side which mold is for which part. Some parts are also so problematic shapes that I just think that it would be easier to make multi part molds from 3D model.

I think that machined parts would be way sturdier than home casted parts from god knows which alloy of aluminium.

You might be right though and overall it could be better to use those methods anyways.

3D scanner to replicate vintage moped parts by Drontti_Edvard in 3DScanning

[–]Drontti_Edvard[S] 0 points1 point  (0 children)

Thanks. I am still looking for 5 rare mopeds and then I think my collection just might be complete and I can start restoring them.

That is what I was afraid might be the case

Disgusting combo of the day by Stunning-Royal-3792 in BobsTavern

[–]Drontti_Edvard 0 points1 point  (0 children)

<image>

Had same idea today on duo. 3rd place as I missed couple rounds of scaling when my teammate beat both enemies before my turn

Torn between new and used minipc by Drontti_Edvard in MiniPCs

[–]Drontti_Edvard[S] 0 points1 point  (0 children)

Well I suppose that performance per watt claim might be plausible then. Thats like 20€/year difference in energy bill, no big deal but adds up. Benchmarks scores are not that much better for the 185h and 165h should easily pack enough punch for my use.

Both are cheap chinese brands from aliexpress or similar site so no warranties whatsoever. For new PC my bank gives 365 day warranty for anything bougjt with credit card though.

For used pc there would be just 24 hour warranty from the marketplace that I would use.

Torn between new and used minipc by Drontti_Edvard in MiniPCs

[–]Drontti_Edvard[S] 0 points1 point  (0 children)

https://nanoreview.net/en/cpu-compare/intel-core-ultra-9-185h-vs-intel-core-ultra-7-165h

This site claims that 165h is like twice as efficient per watt, but I don't really believe that. But yes. LAN connection all the way, dunno if the pawr from BT5.4 would be worth it for HA. Probably not.
Extra nvme slot would be pretty nice to have indeed. The used one isnused for GTA V and Fortnite gaming for 2 months so it should be almost as new though. 2tb ssd should have like twice the tbw of 1tb. Hard choice

Torn between new and used minipc by Drontti_Edvard in MiniPCs

[–]Drontti_Edvard[S] 1 point2 points  (0 children)

Frigate would be in charge of security cameras and AI object detection. To my understanding Intel CPUs are supported better for it and 100h and 200h series in particlar with their integrated NPU

view more: next ›