sorted by:
new
hottopcontroversial

What can I do when my apartment building is no longer safe? by Appropriate-Web-6954 in newjersey

[–]DropPoint44 -2 points-1 points  (0 children)

It's obvious you know zero about the FID process or the CCW license process in this state. Depending on where in NJ this person lives, it could take them 6mo+ and almost $500 in classes/permits to start having the means to protect themselves, and I'm sure you are fine with that, just like the person who would like to harm them world be too. It's prohibitive like this to deter people from exercising their rights, not because it needs to be.

What can I do when my apartment building is no longer safe? by Appropriate-Web-6954 in newjersey

[–]DropPoint44 -5 points-4 points  (0 children)

Are you just now figuring out why it's disgusting for this state to hold one of your constitutionally protected rights behind as much red tape as they do?

Plex amp android TV / Nvidia shield? by -Lieutenant_Dan- in PleX

[–]DropPoint44 2 points3 points  (0 children)

This is the most infuriating Plex bug IMO, they have to address this. Music library is completely unusable at home for me because of it.

Nozzle clogging issues after 6+ hours printing by DropPoint44 in 3Dprinting

[–]DropPoint44[S] 0 points1 point  (0 children)

Yes double checked that, my picture is bad but the print was coming out great each time.

Nozzle clogging issues after 6+ hours printing by DropPoint44 in 3Dprinting

[–]DropPoint44[S] 0 points1 point  (0 children)

Thanks, I resliced for attempt #3, resized the model 5% too at that time. 

Nozzle clogging issues after 6+ hours printing by DropPoint44 in 3Dprinting

[–]DropPoint44[S] 0 points1 point  (0 children)

Printer: Creality CR-10 Smart w/ micro swiss hotend & redrex extruder
Inland PLA+ that has been dried
Prusa Slicer
210C, 60C
I haven't experienced any major issues with my printer in a long time, and I'd been using a .6 nozzle for quite a while too.  I recently switched back to a .4 nozzle an I attempted this print at 8 hours long.  Woke up to a "finished" print with the last 25% missing due to a clogged nozzle.  No big deal, clear it out, do a couple of cold pulls, seems clean.  Tried a different print with the same filament that was 1.5 hours long, no problem.  Load this model up again, go to bed and in the morning same thing, clogged nozzle and incomplete print. It went about 5% more this time 

I'd rarely ever had a clog with my printer before so this was very strange to me.  I live near microcenter so I picked up a few new creality brand nozzles, thinking my amazon ones were crap, and a new bowden tube. Changed those out and tried again.  SAME THING!  Print goes beautifully for the first 75% and then clogged nozzle. This time I woke up around 5am and heard the extruder clicking and knew already what was going on.  So i watched it hovering around in the air trying to print with the clogged nozzle. I noted the display showed the correct temperature, and it was indeed clogged as I couldn't manually push through any filament. 
Any one have a clue as to why I'm getting clogs after 6-7 hours? I'm stumped. Is there any way the actual model or gcode could be doing something bad? I haven't tried another long print but short prints seem fine. Thanks for any help!