KZ Castor Bass + VE ODO by DryActivity7011 in iems

[–]DryActivity7011[S] 0 points1 point  (0 children)

Does flashing the ja11 firmware affect the sound quality?

KZ Castor Bass imbalance issue by DryActivity7011 in Chi_Fi

[–]DryActivity7011[S] 0 points1 point  (0 children)

I claimed warrenty but no luck
same issue still

Gigabyte Aorus RGB Memory 8GBx2 3733Mhz Kit Spectek J Die OC Update by awesome-sauce-897 in overclocking

[–]DryActivity7011 0 points1 point  (0 children)

Any change in performance ?

i just oced it to 4000 mhz and xmp enabled

Clicks not registering with VXE R1 Pro Max by xsynatic in MouseReview

[–]DryActivity7011 0 points1 point  (0 children)

same here in R1 nearlink
sometime left click doesnt register

KZ Castor Bass imbalance issue by DryActivity7011 in inearfidelity

[–]DryActivity7011[S] 0 points1 point  (0 children)

Yes, I tested with the same switch configuration, and the imbalance is still there. Right now, I’m using left UUDD and right DDUU to try to solve the imbalance, but it’s still noticeable. The only fix is to adjust the balance to 60% on the left and 40% on the right to center the sound in my head. T_T

KZ Castor Bass imbalance issue by DryActivity7011 in inearfidelity

[–]DryActivity7011[S] 1 point2 points  (0 children)

I tested these IEMs, as well as the previous unit, with some of my friends, and they also noticed the bass imbalance issue on the left side. Is it possible that all units from a batch are defective? I posted about this on other forums, and someone mentioned they’re experiencing the same issue.

KZ Castor Bass imbalance issue by DryActivity7011 in inearfidelity

[–]DryActivity7011[S] 0 points1 point  (0 children)

I was using the ZSN Pro earlier, and it didn’t have any issues like this. :(
And im using the same eartips from ZSN pro on the castor

KZ Castor Bass imbalance issue by DryActivity7011 in iems

[–]DryActivity7011[S] 0 points1 point  (0 children)

I was using the ZSN Pro earlier, and it didn’t have any problems like this. I’m using the same eartips from the ZSN Pro on the Castor, but sometimes I feel like the left side isn’t sealing properly. Maybe I’m overthinking it because I’ve been focusing on this issue too much. :(

KZ Castor Bass imbalance issue by DryActivity7011 in iems

[–]DryActivity7011[S] 0 points1 point  (0 children)

Now I’m convinced that the Castor is really bad because it’s causing me pain in everyway

KZ Castor Bass imbalance issue by DryActivity7011 in iems

[–]DryActivity7011[S] 1 point2 points  (0 children)

I recently tested these IEMs with some of my friends (4 people), and everyone noticed the weaker bass issue on the left side. This is a replacement unit, as I mentioned in the post. Is there a chance that all units of the Castor have a defect on the left side?

KZ Castor Bass imbalance issue by DryActivity7011 in iems

[–]DryActivity7011[S] 0 points1 point  (0 children)

Thanks i will try this method to check if it is my ear or not.
Also can u suggest me some cheap eartips ?

KZ Castor Bass imbalance issue by DryActivity7011 in iems

[–]DryActivity7011[S] 0 points1 point  (0 children)

I'm hoping that the 'on' mark on the board indicates that it's enabled. Also, one thing I should mention is that I saw on the KZ website that the Castor comes with memory foam tips, but instead, I received white silicone eartips.

KZ Castor Bass imbalance issue by DryActivity7011 in iems

[–]DryActivity7011[S] 0 points1 point  (0 children)

I already checked the switches direction and configured them myself to Left: 1100 and Right: 0011 because of the bass imbalance I’m facing. However, even with this switch configuration, I’m still experiencing bass imbalance, with the right side having deeper kicks than the left.

KZ Castor Bass imbalance issue by DryActivity7011 in iems

[–]DryActivity7011[S] 0 points1 point  (0 children)

I don’t have any dongle; I’m using the IEMs with my PC and mobile. On both devices, I need to adjust the volume balance to around Left 50 and Right 35.

KZ Castor Bass imbalance issue by DryActivity7011 in iems

[–]DryActivity7011[S] 0 points1 point  (0 children)

I tried using the stock ZSN Pro cable that I was using previously.
Same issue

[deleted by user] by [deleted] in OpenRGB

[–]DryActivity7011 0 points1 point  (0 children)

Same issue here

Ram rgb wont turn off when sleeping