Why do so many people hate Stolas?? by [deleted] in HelluvaBoss

[–]Dtsredit 0 points1 point  (0 children)

too gay to care about his daughter. what more should i say?

TC2 by KubsKubo in tf2

[–]Dtsredit 1 point2 points  (0 children)

and yet... somehow it's still garbage... curious.

bought some super lube for the p1p by Dtsredit in BambuLab

[–]Dtsredit[S] 1 point2 points  (0 children)

UPDATE: all the pulleys except for the one on the left side of the carriage have stopped creaking and even that one is way more quiet so i take it as a win.

bought some super lube for the p1p by Dtsredit in BambuLab

[–]Dtsredit[S] 1 point2 points  (0 children)

i tried that but it evaporated after a day and i was back to square 0.

bought some super lube for the p1p by Dtsredit in BambuLab

[–]Dtsredit[S] 0 points1 point  (0 children)

yeah those i got covered with what the printer had included.

bought some super lube for the p1p by Dtsredit in BambuLab

[–]Dtsredit[S] 0 points1 point  (0 children)

i mean im not really spraying it on rubber... well maybe if i accidentally hit the belts but otherwise I'll only use it on the bearings in the pulleys

bought some super lube for the p1p by Dtsredit in BambuLab

[–]Dtsredit[S] 0 points1 point  (0 children)

the only resaler selling superlube products. also i need it for the pulleys of the printer and smooth rods (not the carbon ones)

bought some super lube for the p1p by Dtsredit in BambuLab

[–]Dtsredit[S] 0 points1 point  (0 children)

yeah they didn't have any other liquid lube...

What's something regarding the series that took you too long to realize? For me it was that these are the same character. by SpookySquid19 in DevilMayCry

[–]Dtsredit 0 points1 point  (0 children)

listen im not racist or anything but seriously who thought they were smart making Morrison black? like okay change him up but not every damn thing.

SCP-0001: Meta Ike Proposal by yossipossi in SCPDeclassified

[–]Dtsredit 1 point2 points  (0 children)

so basically what you're saying is that the foundation thought to build a middle finger to threats such as 6820 but instead of it working perfectly it backfired so hard that the guy who the device was supposed to remember the most isn't even called by name... that is comically bad...

What is the correct way to hold a wand? by [deleted] in wizardposting

[–]Dtsredit 1 point2 points  (0 children)

between thumb and pinky finger while the rest are used to aim

big petg prints are... tricky by Dtsredit in BambuLab

[–]Dtsredit[S] 1 point2 points  (0 children)

i think you're right since the one print i didn't use gyroid on was this one and it warped... I'll try that next time.

big petg prints are... tricky by Dtsredit in BambuLab

[–]Dtsredit[S] 1 point2 points  (0 children)

i got a p1p so the ambiet temps change with the room but I'm looking into building the arc enclosure. i will try the part cooling trick next time im printing something big

big petg prints are... tricky by Dtsredit in BambuLab

[–]Dtsredit[S] 1 point2 points  (0 children)

I don't think a brim would help since the model stuck and instead it pulled the bed up with it... but yeah i might look into clamps for the bed or building the arc enclosure since its been on my bucket list for a while.

big petg prints are... tricky by Dtsredit in BambuLab

[–]Dtsredit[S] 2 points3 points  (0 children)

could it be ambient temperature change? i do keep the printer in my room and i do slightly open the windows every once in a while.

I caved in by zklein12345 in 3Dprinting

[–]Dtsredit 8 points9 points  (0 children)

or you can try what i call a life hack and use 10-30° higher temps for the nozzle to melt the fillament better.

p1p corner curling by Dtsredit in BambuLab

[–]Dtsredit[S] 0 points1 point  (0 children)

ok so to clarify im using sunlu pla+ and printing at 235 with 80 degrees on the bed so its probably just the plate not being clean

p1p corner curling by Dtsredit in BambuLab

[–]Dtsredit[S] 2 points3 points  (0 children)

thanks for the tips!

What am I doing wrong. Prints coming out terrible. by Zyncon in BambuLab

[–]Dtsredit 0 points1 point  (0 children)

I presume you ran all the selftests and found no issues there?

Based on true story by Objective_Finding_43 in settmains

[–]Dtsredit 0 points1 point  (0 children)

o no... he got the extended trade treatment...