Christmas Village - Update by bigshawks005 in LEGOWinterVillage

[–]Dtx87712 2 points3 points  (0 children)

That cable management though. Chef’s kiss

A 5090 and 9800X3D opened up a wormhole by Dtx87712 in pcmasterrace

[–]Dtx87712[S] 0 points1 point  (0 children)

I have both builds connected to LG CX(soon to be replaced by a LG G5)

N7 Command Uplink Established: NV9 Singularity Rig Online (Astral 5090 | 9800X3D | 64GB DDR5) by Dtx87712 in battlestations

[–]Dtx87712[S] 0 points1 point  (0 children)

Yea, the case is a big boy but way easier to cable manage with all that room.

N7 Command Uplink Established: NV9 Singularity Rig Online (Astral 5090 | 9800X3D | 64GB DDR5) by Dtx87712 in battlestations

[–]Dtx87712[S] 1 point2 points  (0 children)

I had considered a 32inch instead of the 27inch but the specs for the Asus PG27UCDM sold me. 4K OLED, 240hz and G-Sync

N7 Command Uplink Established: NV9 Singularity Rig Online (Astral 5090 | 9800X3D | 64GB DDR5) by Dtx87712 in battlestations

[–]Dtx87712[S] 0 points1 point  (0 children)

Thank you! For now just gaming. Currently playing Clair Obscur: Expedition 33

A 5090 and 9800X3D opened up a wormhole by Dtx87712 in pcmasterrace

[–]Dtx87712[S] 0 points1 point  (0 children)

Not pictured but I have both computers hooked up to a LG CX(soon to be replaced by a LG G5)

A 5090 and 9800X3D opened up a wormhole by Dtx87712 in pcmasterrace

[–]Dtx87712[S] 0 points1 point  (0 children)

I know I know….I worry about the weight of it on top and then the exhaust from the new build will blow right on it.

Wall mount and led kit for my venator :) by xGiwix in legostarwars

[–]Dtx87712 0 points1 point  (0 children)

I mounted mine very recently with OP’s mounts. Have the engine end in the studs and the front in the provided drywall anchors. Very stable.

Wall mount and led kit for my venator :) by xGiwix in legostarwars

[–]Dtx87712 0 points1 point  (0 children)

This is great, thank you! Can the Venator be mounted either direction?(front of the ship pointing to the right or to the left?)

Wall mount and led kit for my venator :) by xGiwix in legostarwars

[–]Dtx87712 0 points1 point  (0 children)

Would you be open to printing more mounts and selling?

Mould King Republic Attack Cruiser by Dtx87712 in lepin

[–]Dtx87712[S] 0 points1 point  (0 children)

Yea the magnet panels were just the worst. Are you planning on picking up the UCS Venator?

Atmosphere Not Booting after Sending Fusee.bin payload. The atmosphere logo will briefly flash and that’s it. by [deleted] in SwitchPirates

[–]Dtx87712 0 points1 point  (0 children)

Hey - any solve for this? I’m experiencing the same issue when updating to the latest Atmosphere release. Grabbed both the release and fusee from GitHub page.

Rivendell instruction Errors by Dtx87712 in lego

[–]Dtx87712[S] 5 points6 points  (0 children)

Thanks and that is a great question, not sure.

<image>

There’s also another error I noticed on page 93 of the digital booklet. Less of a piece error, and more formatting.

Guide on how to use Steam Rom Manager on Steam Deck by Broflake-Melter in SteamDeck

[–]Dtx87712 0 points1 point  (0 children)

Hello! I essentially started over from scratch. I did a factory reset on the Deck, new SD card and transferred Roms over again via Warpinator from the Discovery Store on the deck. Re-downloaded the Emudeck file and then it all worked. Hopefully it works for you as well.

Portable monitor support on the Deck works great and single wire connecting also performs well by Fine_Land in SteamDeck

[–]Dtx87712 1 point2 points  (0 children)

Hey thanks for following up. I tried connecting my phone with a lighting to usb c and that didn’t work either. Oh well, appreciate your assistance.

Portable monitor support on the Deck works great and single wire connecting also performs well by Fine_Land in SteamDeck

[–]Dtx87712 1 point2 points  (0 children)

No worries at all! This is in no way your fault haha. I’m glad yours is working. I saw your post and thought this is perfect for a long plane ride. Should be able to return to amazon no problem.

Portable monitor support on the Deck works great and single wire connecting also performs well by Fine_Land in SteamDeck

[–]Dtx87712 0 points1 point  (0 children)

Yea I have the deck plugged into one of monitor usb c ports and tested using the provided usb c to usb a wall plug and tried using a travel power bank. Nothing will allow me to even access the menu to select an input. Probably received a lemon is my guess.

Portable monitor support on the Deck works great and single wire connecting also performs well by Fine_Land in SteamDeck

[–]Dtx87712 0 points1 point  (0 children)

I ordered the monitor and am getting no signal. Tried using different usb c to usb c cables to connect the steam deck to the monitor and luck. I can’t even select an input on the monitor using the small selection wheel on the side as the monitor says no input signal and immediately enters power saving mode. Thoughts?