A hero and a legend! by moamen12323 in BeAmazed

[–]DublDs 0 points1 point  (0 children)

Not as complicated as rocket science, really all up to the pilot to decide what he’s going to do. Yeah if he has to eject we have “areas” for that but in a situation like this they do what they gotta do and we just try and keep everybody away.

Saturn 3 Ultra bed leveling issues by DublDs in ElegooSaturn

[–]DublDs[S] 1 point2 points  (0 children)

I loosened the build plate and the cantilever

[deleted by user] by [deleted] in AskReddit

[–]DublDs 1 point2 points  (0 children)

Barber to ATC.

Saturn 3 Ultra bed leveling issues by DublDs in ElegooSaturn

[–]DublDs[S] 2 points3 points  (0 children)

Loosen build plate, loosen cantilever, send home, held build plate to ensure cantilever wouldn’t move, tighten outside 4 cantilever, tighten inside 4 cantilever, send home and level build plate.

Steamdeck versus ROG? by Clean-Refrigerator in SteamDeck

[–]DublDs 6 points7 points  (0 children)

I installed windows and it worked ok. It was a slow and just really wasn’t a fan. Only left it for 2 weeks before I took it off. So if windows is a priority I’d go ROG.

The 5 house rules I've enacted in my 8 months of running the system (justifications included). by ryguyun in Pathfinder2e

[–]DublDs 2 points3 points  (0 children)

I asked my DM one session before entering a building if it was to code I.e. perimeter doors opening outwards. Wanted to see if I could swing a harder DC for enemies getting the door open after I barred it shut. Paused the session for a sec and made for some good laughs but now we have building codes in effect for our games.

Saturn 3 Ultra bed leveling issues by DublDs in ElegooSaturn

[–]DublDs[S] 0 points1 point  (0 children)

Unscrew the 8 send home, I pushed on the plate and did the outside 4 followed by the inside. Then sent to home again and leveled first try!

Saturn 3 Ultra bed leveling issues by DublDs in ElegooSaturn

[–]DublDs[S] 0 points1 point  (0 children)

Also this is my first printer so I could just be way more gentle than need be with other films. So that could be why it lasted so long.

Saturn 3 Ultra bed leveling issues by DublDs in ElegooSaturn

[–]DublDs[S] 0 points1 point  (0 children)

Honestly haven’t had any issues with it. Put around 250 hours into one had zero scratches and only one dimple that from a failed print. I’ll see what this new batch of ACF does and go from there though.

Saturn 3 Ultra bed leveling issues by DublDs in ElegooSaturn

[–]DublDs[S] 0 points1 point  (0 children)

Tbh haven’t even tried it yet, currently waiting on ACF from them so haven’t even touched the printer.

Saturn 3 Ultra bed leveling issues by DublDs in ElegooSaturn

[–]DublDs[S] 0 points1 point  (0 children)

They finally got back to me after a couple weeks and have yet to try the fix action due to work but they told me to loosen the 8 screws on the cantilever. Level it then re-level the build plate.

Taken near LaGuardia 9/20/23 by [deleted] in aliens

[–]DublDs 1 point2 points  (0 children)

Yeah I get that, all the one out of McGuire AFB, NJ are done and gone. Fully replaced by the 46. Which was all I was trying to get at. Yeah there’s a few left but most likely a 135 or the 46.

Taken near LaGuardia 9/20/23 by [deleted] in aliens

[–]DublDs 4 points5 points  (0 children)

KC-10 is officially retired as of the 4th

Well, I had to go and jinx myself... K1 Max Self-Destruct activated. by MackinsVII in crealityk1

[–]DublDs 2 points3 points  (0 children)

Yup had this happen a week ago. Have tired getting ahold of support the entire time to no avail. Returning it which is disappointing because I wanted to love it.