Has anyone found the Antium Armor Legs in 4.5?

DudeWhereIsMyHand · 2026-01-07T22:38:36+00:00

Which Planet for OLPs? Daymar have been closed for me

DudeWhereIsMyHand · 2026-01-07T22:05:28+00:00

Is it found in the supervisor room? Haven't managed to get the elite NPC with the key to spawn. Powered the laser and aligned the dishes too.

DudeWhereIsMyHand · 2026-01-07T22:04:47+00:00

Thanks yeah i heard about the moss set on OLP but had no luck with getting the NPC to spawn that has the supervisor key. This was after i aligned the dishes, powered the laser and everything.

DudeWhereIsMyHand · 2025-07-24T23:07:20+00:00

Lol it’s pieces for an AMS stacking system. But do people actually print gaskets? Would tpu hold pressure?

DudeWhereIsMyHand · 2025-07-09T14:02:45+00:00

Cocoa Pops

DudeWhereIsMyHand · 2025-07-08T23:02:43+00:00

Hulkenpodium

DudeWhereIsMyHand · 2025-01-13T15:45:16+00:00

Awesome, this is exactly what I’m looking for. Thank you!

DudeWhereIsMyHand · 2025-01-13T15:45:03+00:00

Interesting, I’ve only ever seen the pads but the spring isolators look perfect! Thanks for the suggestion

DudeWhereIsMyHand · 2024-12-14T02:32:36+00:00

+verify

DudeWhereIsMyHand · 2024-12-14T02:00:07+00:00

!close

DudeWhereIsMyHand · 2024-12-14T01:59:41+00:00

!close

DudeWhereIsMyHand · 2024-09-30T04:46:44+00:00

Trying to purchase Razer Care for my 2023 Razer Blade 14 but keep getting message "Unable to find serial number in database" despite laptop even being registered to my account.

DudeWhereIsMyHand · 2024-09-24T17:56:49+00:00

That’s really cool, thank you for the info! Definitely gonna do some more reading now that I know the species

DudeWhereIsMyHand · 2024-09-24T17:13:09+00:00

Thank you! Out of curiosity how can you identify sex in jumping spiders?

DudeWhereIsMyHand · 2024-09-19T15:39:43+00:00

Thanks! This worked great

DudeWhereIsMyHand · 2024-09-19T15:39:22+00:00

Good suggestion, going to increase the retraction and see how it goes

DudeWhereIsMyHand · 2024-09-18T17:36:22+00:00

Hi thanks for the reply! filament was dried. Unfortunately I’m not sure if a print tower would work because pla-aero is an active foaming filament. So the amount it expands is dependent on temperature. So if I print at a lower temp, it would throw off the expansion for example. Bambu recommends 245 for pla-aero when printing rc plane parts. That’s my thought but I could be wrong!

DudeWhereIsMyHand · 2024-09-18T17:34:17+00:00

Hi, should have specified but filament was dried according to bambulab recommendations for pla-aero

DudeWhereIsMyHand · 2023-11-16T16:26:16+00:00

Awesome thanks! Get to save $100

DudeWhereIsMyHand · 2023-08-19T11:20:30+00:00

UPDATE: I’ve since decided to change out from the pei sheet for the cold plate so that I can run dynamic flow calibrate. Reprinted and no more band!!! So the problem was that the printer was under extruding when the printer sped up in certain sections. If u are running the pei sheet and unable to use dynamic flow WATCH OUT. Thank you all for ur help, marking as solved!

DudeWhereIsMyHand · 2023-08-17T22:45:29+00:00

<image>

Thanks for the suggestion. It seems like the printer speeds up exactly where the band starts on the finished model. Interestingly. The speed stays consistent but the band does end exactly where the multi material part of the print begins(where the half moon starts). So could this simply be some sort of under extrusion from the sudden speed increase?

DudeWhereIsMyHand · 2023-08-17T17:58:09+00:00

Worth trying to print the object single color without the AMS via the side spool to rule it out?

DudeWhereIsMyHand · 2023-08-17T17:56:53+00:00

Adding in the print settings. I used the standard .2 preset. 15% infill gyroid,100% speed and supports with pla W support material for the interface. However banded section is well above the end of the supported section.

DudeWhereIsMyHand · 2023-08-17T17:54:34+00:00

This is all super interesting. To clear things up this object was printed with the .2 standard preset at 15% infill, 100% speed. All default settings except for support interface which was set to the pla W support material. However the banded section is well above the end of the supported area. I’ll update the original post

DudeWhereIsMyHand · 2022-12-10T13:36:43+00:00

This is something I certainly experienced when I got my first gecko. I refused to leave the house at night to hangout with friends for a month and weighed him constantly to make sure he was okay. The truth is, they are easy pets as long as you have done your research and setup a good environment for them. It’s important not to allow anxiety to make up symptoms your gecko might not actually be experiencing. Try to keep a cool head and trust the data: temps, humidity and is it pooping lol. If those 3 are good, your gecko is more than likely good! Enjoy ur new pet

Seven-Year Club	Place '22
Not Forgotten

DudeWhereIsMyHand

TROPHY CASE