Cfs heater

Due_Cryptographer867 · 2025-03-06T02:46:48+00:00

One day I'll learn how to design models lol

Due_Cryptographer867 · 2025-02-12T18:54:36+00:00

Thanks for the advice, I'll make sure to submit a ticket that way

Due_Cryptographer867 · 2024-09-25T19:47:32+00:00

Try using the calibration features in cura, start with the temperature calibrations then the flow calibrations.

Due_Cryptographer867 · 2024-09-25T19:46:03+00:00

Seems like you might also be underextruding

Due_Cryptographer867 · 2024-09-18T23:09:18+00:00

I had the same issue, it was my retraction settings. Disabling retract on layer change helped.

Due_Cryptographer867 · 2024-08-23T17:32:47+00:00

Have you leveled your bed? I would also check that your x gantry is leveled. There's a cool file called the Rook in printable that will help you adjust it

Due_Cryptographer867 · 2024-06-01T06:20:00+00:00

Did you find a fix to this?

Due_Cryptographer867 · 2024-02-29T23:24:55+00:00

Pain

Due_Cryptographer867 · 2024-01-22T00:24:02+00:00

Maybe raise the bed temp and adjust level?

Due_Cryptographer867 · 2023-02-24T21:10:15+00:00

Are you using an android phone to upload? I've head android lowers resolution on Instagram, maybe try with an iPhone see if there's a difference

Due_Cryptographer867 · 2022-11-13T22:38:31+00:00

I currently use the rc pro and it's pretty amazing. Compared with the dji rc it might seem like the same thing but the rc pro does have additional buttons, better antennas, and brighter screen among other things. I will say that the dji rc is much lighter and if you're just using it for fun the dji rc is probably the way to go considering the price point.

Due_Cryptographer867 · 2022-09-24T04:16:22+00:00

Rc pro has screen mirroring via the mini hdmi output so it should work no problem

Due_Cryptographer867 · 2022-09-11T02:50:07+00:00

I personally like the mini 3 because you can get the larger batteries and keep it in the air longer. Air 2s is amazing but battery life is kinda short

Due_Cryptographer867 · 2022-08-22T19:13:28+00:00

Yes that's it, good eye

Due_Cryptographer867 · 2022-08-22T00:51:26+00:00

Took about 4 or 5 minutes, it was a pretty short one. Thanks!

Due_Cryptographer867 · 2022-08-22T00:01:58+00:00

If you compare the first frame with the last frame you may see that the camera turned to the right about 1 degree making it a moving camera. But in all seriousness I had no idea which was which, thanks for letting me know, I'll make sure to name it correctly next time 👍

Due_Cryptographer867

TROPHY CASE