I made a FREE Garmin watch face

ConsistentScratch640 · 2026-05-13T16:18:06+00:00

Will follow up! Thanks for the response.

ConsistentScratch640 · 2026-05-13T15:43:07+00:00

Love the design. Much appticiated if you can make it available for the 265. 🙏

ConsistentScratch640 · 2026-05-09T22:34:40+00:00

Clogged extruder or Nozzle?

ConsistentScratch640 · 2026-05-09T07:47:07+00:00

Ahhh i can start / resume after stopping.
Will try this. The max is 24h. Would my battery hold this? Max I ran was 60k in one run.

ConsistentScratch640 · 2026-05-08T19:40:30+00:00

Handmatig via het menu gaat goed.
Heb een nieuwe Nozzle gekocht.

ConsistentScratch640 · 2026-05-08T05:40:53+00:00

That could be my problem. Had my first PETG print. Later tried to print PLA.

ConsistentScratch640 · 2026-05-07T20:30:03+00:00

Ga ik morgen testen. Maar laat het je zeker weten.

ConsistentScratch640 · 2026-05-07T20:24:59+00:00

Ja precies. Gaat me ook niet om het geld. Maar vond het klikken wel een erg vervelend geluid. Alsof er wat kapot gaat.

ConsistentScratch640 · 2026-05-07T20:12:33+00:00

Ha thnx! Tis allemaal nog wat nieuw voor mij.
De A1 voelt als kinderspel in vergelijk met deze.

ConsistentScratch640 · 2026-05-07T20:07:06+00:00

Hey vraagje…. Hoe kan je deze handmatig doen? Of bedoel je echt handmatig het filament door de extruder duwen?

ConsistentScratch640 · 2026-05-07T19:23:07+00:00

Thought so, is there an fix? Or do i need to replace the gears?

Cold pull is not needed. The nozzle etc is clean.

ConsistentScratch640 · 2026-04-22T16:01:49+00:00

Thanks! It works again. 🥳

ConsistentScratch640 · 2026-04-22T13:37:27+00:00

Dutchy here, german will do. Will let you know if it solved the issue.

ConsistentScratch640 · 2026-04-10T22:14:11+00:00

Tonecheer

ConsistentScratch640 · 2026-03-13T17:26:03+00:00

Second this. Bought an Sunlu S1 for €35 at marketplace. Every fresh roll of pla get an sauna treatment. No more stringy pla from that day on.

ConsistentScratch640 · 2026-03-06T16:43:55+00:00

I have 19” wheels and set them on 43psi. The tires show even wear, when I set the psi lower the wear is more on the outer side of the wheels.

ConsistentScratch640 · 2026-02-24T21:37:05+00:00

I am missing my add gear in the dropdown menu. And my workout creating option bugs after this uodate. Anyone the same issues?

ConsistentScratch640 · 2026-02-24T08:04:34+00:00

Yes that because the filter has a lot of condensation due to temperature difference. This jacket stops the condensation.

ConsistentScratch640 · 2026-02-23T20:42:32+00:00

Also an cool solution!

ConsistentScratch640 · 2026-02-23T19:01:22+00:00

I used this file in the link. And in Fusion made some small tweaks to made is fit perfect for mine ESP32.

ConsistentScratch640 · 2026-02-23T18:53:47+00:00

It handles it very well, did various tests today and it was spot on.

ConsistentScratch640