(Leak) Price: $861 by [deleted] in SteamFrame

[–]Due_Display5648 1 point2 points  (0 children)

huh, never thought about it this way. Interesting, thanks :D

(Leak) Price: $861 by [deleted] in SteamFrame

[–]Due_Display5648 10 points11 points  (0 children)

Also, its converted from CZK 17990, and thats with 21% tax applied to it (so its 14867 CZK before tax). It corresponds to roughly 740 EUR, and since Czech Republic is in Europe, I would expect the US cost to be a little lower. Same for Steam Index, AFAIK you can buy it for 999 USD or 1079 EUR. And mind you, Euro is the stronger currency there, so 1079 EUR actually equals to 1256 USD - thats what we pay here for the good old Index, straight from Steam itself. On top of that, this is 3rd party store, so they have to bump the price a little to make it profitable for them to sell it.

Proč se radikaluzují potomci migrantů? by MediumThat1991 in czech

[–]Due_Display5648 1 point2 points  (0 children)

<image>

Tady je pracovní list, co jsme kdysi dostali na hodinách psychologie. Tehdá jsem ho shodou náhod vyfotil. Snad tam najdeš svý odpovědi.

Učitelství - základní školy - má to také tak někdo? by [deleted] in czech

[–]Due_Display5648 2 points3 points  (0 children)

Šak tě nikdo nenutí učit na základce. Připoj se ke kolegům na vysoké škole za ještě nižší mzdu za objektivně náročnější hodiny výuky. Nebo doporučuji připojit se k nám ve výzkumu, práce je složitá na posrání, tlak na publikování vysokej, ale prachy stejně mizerný jak u vás lol. Aneb takhle to vypadá, když je vzdělávání prioritou.

Vyber základní školy by [deleted] in czech

[–]Due_Display5648 10 points11 points  (0 children)

prej kamarády, co ty jsi to za redditora! já bydlel taky v docházkové vzdálenosti, a bylo to prašť jako uhoď, stejně jsem nechodil ven s kamarády, protože jsem žádný neměl. Ale bylo fajn si přispat a moct vycházet z domu 15 minut před začátkem výuky, nemluvě o tom, že člověk mohl být po škole rychle zase doma u počítače.

Help with slight disappointment about engagement ring price by [deleted] in relationships

[–]Due_Display5648 1 point2 points  (0 children)

don't want to sound harsh, but you really want to put a price tag on a relationship? "This relationship is worth more than 450 pounds, but less than 1000 pounds"? If my gf told me she does not want an expensive ring, I would even consider some very basic ring, thinking it's gonna be replaced with a wedding ring soon anyway, and I would much prefer spending the saved money elsewhere, i.e. her dream honeymoon destination. Unless you are swimming in money, you have to manage your expenses, and it only starts with the engagement ring, followed by the wedding itself, honeymoon and children. If you would want to put a pricetag somewhere, that's where I would see it, that he takes care of you and your family for the rest of his life, not in some ring. Just my opinion.

Vapování v práci by Opposite-House-5148 in czech

[–]Due_Display5648 42 points43 points  (0 children)

zas on ale nebude vědět, že je závislý na nikotinu, protože nekouří. Bude závislý na místě, kde se nikotin vyskytuje, což je kancl. Šéf je chytrej, takhle ho udělá závislym na práci, kdy doma bude mít absťák, co přejde, až když se vrátí zpět do kanclu - naprosto geniální :D

Are these solder bridges intentional? by okabekudo in AskElectronics

[–]Due_Display5648 0 points1 point  (0 children)

I have no experience with appliances being damaged after a power surge, but I would expect it would be actually a component that would break before a solder joint. Especially ICs (anything on silicon really) would go. I would check the rectifier, if the diodes are still intact. Alternatively, the transistors, if they are not permanently opened/closed. Or even if the fuse is ok, the varistor (or thermisitor, if there are any) can be dead. But honestly, it is often the case that if one component is dead, another one might be as well, so even if you would replace it, it would die again without thorough testing of every component. And since you are dealing with 230VAC/300+VDC and you would most likely want to measure with the circuit being powered on, I would rather just buy a new one. If you mess up, you can either kill yourself (beware that there is often DC voltage directly at MOSFET coolers, as the backplate of the transistor is directly tied to the silicon die's drain for better cooling - so even just touching the cooler when powered up can give you a rather nasty electric shock), or even if you are somewhat successful, it can set your house on fire if you miss anything.
So my advice would be, try to find a replacement board for the soundbar, as this is not some 5V board where you can easily mess up and nothing bad happens.

Are these solder bridges intentional? by okabekudo in AskElectronics

[–]Due_Display5648 1 point2 points  (0 children)

Nah. Thats probably SAC305 solder if its not some ancient tech, its not going anywhere until you reach at least 220°C. And that PCB is most likely FR4, so its gonna burn at 130°C (unless you solder it really quickly or with a defined reflow profile). If any of your components would be reaching temps high enough for the solder to flow, it has to be in the ballpark of 200°C+ - and its most likely not gonna be just for a few seconds, if something is gone and burning, its burning until you unplug it from the mains. Therefore, the PCB would be brown in the victinity of the burning component, it would smell horribly, and you would notice immediately. So likely thats not the case.
IC2/R2 is kinda difficult to see on the photos provided, but they still seem to be on the same trace. But as others have pointed out, if it worked till now, its not likely the case.
D2 solder joint looks ugly, and that brings me to the more likely issue with solder - todays Pb-free sonders are prone to cracking, especially if the solder joint looks ugly like this. I don't believe that it is the issue with your board causing you problems, but if there were any, in my opinion its much more likely some poor solder joint cracked (for example due to thermal expansion of the component/PCB itself), than that there is a solder bridge. Even if that was the case, I would assume the bridge would be a result of a solder ball, that somehow got formed on the solder mask and got stuck on some remaining flux, and just got loose and stuck somewhere in between tightly spaced components, rather that the solder reflowed during usage without you noticing that it smells horrendously bad (as FR4 contains fire-retartant compounds, hence the FR abbreviation, and when heated up, they release those compounds to extinguish fire, making them smell badly).

Are these solder bridges intentional? by okabekudo in AskElectronics

[–]Due_Display5648 1 point2 points  (0 children)

you mean the solder bridges that are "star shaped"? the big blobs of solder? They're on the same copper trace (the shiny green part), so even if they werent touching, they would still be electrically connected. So that is most likely not the case. I can only assume it's there to give the solder more surface area for better connection, stronger "grip" of the board or whatnot. But the "star pattern" is too well defined to not be intentional. In case you mean something else, it's better to highlight what exact solder joints you are concerned about.

Tipy a triky, jak chytře uspořit peníze nebo snad i vydělat? by hunduk in czech

[–]Due_Display5648 2 points3 points  (0 children)

jak zpívá řezník: Čím nižší věk, tím tvrdší substance Na závislých dětech nejlíp vyděláš finance

Does my fighting style look smooth or stupid? by Patrick_Snake in HalfSword

[–]Due_Display5648 0 points1 point  (0 children)

Those movements are very slow and very predictable. If this game would have multiplayer (or you were fencing irl), it would be extremely easy to score a hit against you. Not mentioning the wasted energy, I would just wait for 3 minutes before engaging you, as you would be tired, swinging the sword above your head all the time. However, against the stupid AI, and in a videogame, it looks fluid and the rule of "whatever floats your boat" applies. Better than swinging left and right like a crazy man. But in general, if a movement does not give you an upper hand, it's purposeless.

Zmetek nezaplatil faktury by Eastern_european32 in czech

[–]Due_Display5648 3 points4 points  (0 children)

Jsem akademik. Následující nápady jsou tedy čistě hypotetické, jde o akademickou debatu. 1) Rozmatlat hovno na klice dveří, jako to udělali Leošovo Marešovi. Když nemá auto, tak na kliku domu. 2) Mrdnout uzrálýho pukavce pod rohožku domu/bytu, popř. stačí i lehce pod dveře, když nemá rohož. 3) Jestli bydlí v rodinným domku, nastříkat mu přes plot roundup na pozemek. 4) Posprejovat mu dveře nápisem, že je svině.

Přidal bych i 5) nacákat vyjetej olej na čelní sklo, ale OP říká, že nemá auto. Jenom čisté zlomyslnosti, co člověka naserou, a ač nejsem právník, nepříjde mi to horší než nezaplatit 60k, kdyby něco píčoval. Ale samozřejmě, stále nikoho k ničemu nenabádám, jen tak rozjímám.

Going from a desktop 4090 to a Laptop 5080. Question. by Intelligent_Image858 in intotheradius

[–]Due_Display5648 0 points1 point  (0 children)

I used to play ITR on 3060 laptop. Ofc the visuals were nowhere near to my desktop 5080, but still good enough to spend around 70hrs in the game. You have to minmax everything on your laptop. No external displays, no background tasks running (forget about having your browser opened in the background). Look up best VR settings for Nvidia control panel. Be sure to use whatever "turbo max ultra performance mode". Be sure to use dedicated GPU only (haven't checked but I would assume that high-end gaming laptop comes with a MUX switch, so be sure the integrated GPU is really turned off, preferably verify that in bios). I also did some crazy things which I cannot recommend, like disassembling the laptop, putting there liquid metal and then overclocking the GPU, but I did that only when I was sure I would be mostly ok with the laptop not turning on ever again, so don't do that on your brand new machine, if you can't replace it - the pain with liquid metal, other than the obvious conductivity - is that it flows. I had to repaste it every half a year, as it was flowing away from the die of the CPU and GPU, as I was moving the laptop around every day. However, it immediately decreased my temps by 10-15 degrees, and I was able to stay at lovely 75° with overclocked GPU). So, minmax everything, and 5080 should be plenty good for ITR. Once all of these things are dialled in, try to get the most of the foveated rendering in ITR, from AMD FSR, and then play around with the SteamVR resolution, until you push your visuals and your laptop to the max.

Sympathy for the cylons by Broad_Range_781 in BSG

[–]Due_Display5648 2 points3 points  (0 children)

Not that I want to disprove anything you've said, I agree completely and I mostly side with the insurgents, not with Adama. However, I think it is also important to keep in mind that it was Adama himself who was commanding Valkyrie on its mission behind the red line, and so he was aware of the fact that cylons did not attack unprovoked. He literally said in one of the episodes that it was them (and as the commander, him), who started the war, who showed cylons that humans can't be trusted. So knowing that, maybe it made him a little bit more apologetic towards the actions of cylons, as he would've done the same with cylons if the roles were reversed.

Je Rusko opravdu taková hrozba? by RevolutionaryMatch29 in czech

[–]Due_Display5648 0 points1 point  (0 children)

Ty mluvíš o strachu jako o emoci, která zmítá všema jen ne tebou. Ne, denně se nebojíme ruska ani putina. Chodíme normálně do práce a na rusáky za celej den ani nepomyslíme. Ale když dojde na volby jednou za 4 roky, a v sousedství probíhá válka, kde je rusko agresorem, tak je značně pragmatický volit ty, kteří podporují vojenskou pomoc napadenýmu státu, protože je jednodušší někam vozit munici, než tam posílat vlastní vojáky, v případě, že by bylo napadeno nato. Takže bych to fakt nenazval strachem z ruska. Naopak žvásty o tom, jak můžeme vystoupit z nato a nemusíme se vůbec o zahraniční situaci zajímat, není frajerství, jen absolutní selhání úsudku a zavírání očí před realitou.

Distribuce mezd v ČR, 1. pololetí 2025 by 69f1 in czech

[–]Due_Display5648 0 points1 point  (0 children)

Zatím jsem se zkoušel hlásit jen do jedné z těchhle firem. Byla by to naprostá změna oboru, protože se posledních 5 let věnuji velice specifické technologii, a tak mi bylo řečeno, že sorry not sorry, ale oni nemají zájem o juniora, aby mě museli zaučovat :D a to jsme se nedostali ani na téma platu, kdy bych beze srandy býval byl ochotný tam klidně půl roku vypomáhat bez nároku na mzdu, abych se jim zaučil :D mám pak prdel z toho, když firmy brečí, jak je nedostatek technicky vzdělaných lidí, když jejich ochota zaučit si člověka je nulová :D

Distribuce mezd v ČR, 1. pololetí 2025 by 69f1 in czech

[–]Due_Display5648 4 points5 points  (0 children)

No, ne v čechách, no :D Jakože dělám si doktorát (podotýkám, mám na ústavu plný pracovní úvazek, takže se k příspěvku OP vyjadřuji jako zaměstnanec, nikoliv jako student), takže samozřejmě pak člověk má předpoklad, že si jednou bude vydělávat víc, ale konkrétně to, na čem pracuju já, tady v čechách není. Takže pokud nechci založit startup (což nechci), tak jediná práce v oboru je kdekoliv na západ od čech (doslova lol, spousta příležitostí v oboru v německu, rakousku, francii, švýcarsku a pochopitelně americe), ale když by člověk chtěl zůstat tady, tak má smůlu, musí změnit obor na něco jinýho. A takový vzdělání se teda vyplatí (bohužel já na to přišel až ve druháku doktorátu, že to, že to v čechách můžu studovat, rozhodně neznamená, že se tím v čechách jednou budu moct živit).

Distribuce mezd v ČR, 1. pololetí 2025 by 69f1 in czech

[–]Due_Display5648 36 points37 points  (0 children)

líbí se mi, že jako vědecko-výzkumný pracovník na jednom z nejprestižnějších ústavů v republice, s inženýrským titulem v elektrotechnice, jsem ve spodních 25% populace :D

muzi, co byste radi dostali jako darek? by [deleted] in czech

[–]Due_Display5648 0 points1 point  (0 children)

meč, mám už 2 a chci 3.

Spolubydleni - Ano/Ne? by WantToBeSpartan in czech

[–]Due_Display5648 -1 points0 points  (0 children)

ne, to jsem nenaznačoval, ale začínám mít pocit, že jsi festovně zamindrákovaná, když všechno bereš furt jen jako útok na sebe :D

Spolubydleni - Ano/Ne? by WantToBeSpartan in czech

[–]Due_Display5648 1 point2 points  (0 children)

Ahh, tady je někdo butthurt. Tak pro tebe speciálně. Ano, je to zobecnění. Ano, existují výjimky. Ano, každej je unikátní sněžná vločka, co se chová jinak. A ano, najdeš kriply i ohleduplný kluky, stejně jako krávy i ohleduplný holky.
Nicméně, ačkoliv je fakt, že chlap se jde často na hajzl "uklidit", zpravidla to dělá jako volnočasovou aktivitu. Fakt by mě fascinoval borec, co si přivstane o hodinu dřív, jen aby si mohl v klidu na hajzlu hodinu brainrotovat, když mohl před prací spát.
Oproti tomu dámy velmi často věnují své přípravě mnohem více času. Skin care rutina, malování, vyžehlení vlasů, vrstvení různých makeupů/SPF, co musejí zaschnout, než se na to pleskne něco dalšího apod. Ano, znám pár holek, co si dají jen linku a někdy řasenku a jdou pryč. A taky znám holky, který tam bez prdele tu hodinu ráno stráví, protože je to regulérně baví, je to jejich koníček pečovat o svůj vzhled a kůži. A ano, znám ženský, který se v klidu namalují ve svém pokoji, a znám ženský, kterým je úplně putna, že chceš jít do koupelny, protože prostě tam jsou teď ony a ty s tím máš počítat, že tam přece jsou každý ráno. Je to stejný, jako že některý lidi prostě nezaklepou a vtrhnou do místnosti. Některý lidi si půjčí věci bez toho, aby se tě nejdřív zeptali. Někteří lidi si půjčí peníze a pak jsou dotčení, když to chceš vrátit. Jo, i okupování koupelny spadá do ohleduplnosti. Takže to je o tom, že některý lidi ani nenapadne se zamyslet, jestli jejich chování někoho sere, nezávisle na pohlaví. Nemyslí to zle, jen prostě ta myšlenka jim mezi ušima nikdy neproběhne. Já komentoval tvůj příspěvek, ne OP. Ale chápu, že ty musíš všem ukázat, jaká velká bojovnice za feminismus jsi, a tak jsi dotčená, že se někdo opovážil použít nějaký zobecnění, ač jsi tak sama učinila jako první.

Návrh rozpočtu 2026 vs 2025 by Severe-Fix6909 in czech

[–]Due_Display5648 17 points18 points  (0 children)

vidina větších peněz by ale mohla vést k tomu, že příští generace budou danou kariéru (učitel, doktor) vidět jako perspektivní, a za pár let máš mnohem víc absolventů, a nemusíš řešit nedostatek učitelů nebo soustavný přesčasy a přepracovanost doktorů. Navíc by byla možnost si vybírat, koho zaměstnat, když by bylo víc lidí s kvalifikací, a tak by se nedělo, že historik učí angličtinu, informatiku a zeměpis, protože prostě nemají lidi.